|
SKU: GS46388
This is a new OEM reproduction 1968-style Gibson case handle that is a glove fit for most 1968-1974 Les Paul cases. May be correct for other cases of the late sixties when a handle with square shoulders is called for. Good quality handle is the same size and dimensions the original Les paul handle. Comes with four TKL mounting rivets for an easy pro installation, shown below.
You can use the mounting hardware attached to the handle, or the hardware that may still be mounted to your case. (Two new axles are available at extra cost...this allows you to retain the original case hardware).
Standard Gibson sizing will fit many cases from the sixties: measuring from center of leg to center leg = 4.25 inches. SEE PIC - comparison with broken 60s Gibson handle...exact size match.
"On many of the cases we have repaired lately you almost cannot tell there was a handle change! Excellent vintage reproduction!"
shipping to usa 3.50 call IslandFunhouse 401 419 0621 for a paypal invoice more information »
|
|
|
|
|
|
 |
SKU: GS1873151
Classic lyra design w/perloid buttons. Very good quality tuners. Measurements: Center-to-center 1-3/8"or 35mm, Shaft length 1-3/16", Shaft Width 3/8" -- measured in our repair shop. (Acoustic Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS1873700
Nickel, 3 on-a-side, 14:1 gear ratio, butterbean style button. (Acoustic Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS1874271
Basic black plastic knob numbered from 0-10. (Electric Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS61107
This pedalboard is constructed of durable aluminum alloy, one of the strongest and lightest metals in the world. Each PEDALTRAIN frame weighs less than the same size piece of 3/4 plywood. There are no moving parts to loosen or wear out. With a durable powdercoat finish the PEDALTRAIN will last a lifetime.
Just what the doctor orders for you studio cats who don’t need the extra weight (or expense) of a flight case. Or for the hired gun who plays and travels with different bands and needs two different pedal board setups and already owns the PT/PRO flightcase. This model is also suitable for the pedal junkie starring in your living room. A nice heavy duty cordura nylon gig bag is included with solid panels sewn inside the walls, plus a large and roomy gusseted pouch on the exterior.
frame 32x16x3 inches / weight 7 lbs.
case 34x18x5.5 inches / weight 7 lbs. more information »
|
|
|
|
|
|
|
|
|
SKU: GS1890123
Morley 9V 300mA regulated adapter for use with all Morley pedals. Center polarity is negative. Equipped with handy LED to show that power is on. more information »
|
|
|
|
|
|
|
SKU: GS1867073
POLISHED LACQUERED BRASS - HAND-ENGRAVED PLATE - SMALL OVAL IVOROID BUTTONS - 3-on-a-plate for 6-string guitars with slotted headstock, .236" post diameter, 1.3775" post spacing (on center), replicas of tuners dating back to the late 1920's to the 1940's. (Acoustic Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS1875465
Covered (unsealed) gear on rectangular plate. Chrome. Buttons similar to Fender®. Bushings & screws included. (Electric Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS1873664
Black, fits floyd rose and imports (metric thread). (Electric Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS1854025
STYLE 18 - 1939-1940's - Plain black, authentic non-slotted replica pins as used on style 18 Martin guitars from 1939-1940's. Set includes six bridge pins and one endpin. Imported from Germany. (Acoustic Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS6252
QWiK
TUNE
PACKED WITH FEATURES:
* Automatic Note selection
* High Sensitivity mic
* Fast & Accurate LCD meter
* Superior performance
more information »
|
|
|
|
|
|
|
SKU: GS1873656
Chrome replacement bridge for Stratocaster®. Includes bridge block, bridge plate, 6 vintage saddles (including intonation screw, height screw, and tension spring), tremolo bar, tremolo springs, and all mounting screws. (Electric Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS1872662
CHROME STOP BAR TAILPIECE WITH STUDS AND INSERTS (Electric Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS1875459
Black finish, includes bar and holder that screws into tremolo. (Electric Guitar Parts) more information »
|
|
|
|
|
|