| Results For: | Gear Type: Amp Parts
Gear Type: Amps
|  |
Filter:
|
SKU: GS832980
DIY Build or Rebuild Kit for a Blackface AA764 Fender Vibro Champ Amplifier. Your little Champ will sound better than ever before, and provide years of reliable service. The kit includes a hand built, turret board, High Quality Carbon Comp Resistors, and Sprague Orange Drop or Mallory 150 Series capacitors, our 5F2 champ power transformer, TF103 Output Transformer, Replacement Filter Capacitor, two 8 pin belton sockets (6V6,5Y3), two 9 pin socket (12AX7 x 2), two 250k potentiometers (Tone Controls), one 1M potentiometer (Volume Control), one 3M potentiometer (Vibrato Speed), one 25K potentiometer (Vibrato Intensity), Jacks, Switch, Fuse Holder, Lamp Holder & Jewel, & Power Cord. The kit also offers some flexibility for those who aren't afraid of experimenting. The Filter cap is a 40-20-20-20 @525V so you could try some different power supply filtering configurations by parralelling two sections for a single 60uF. The output transformer Has outputs for 4 and 8 ohms as well as ultra linear taps aka Dr. Z amps, if you wish to use them. We will also throw in enough wire to do the job. Tear the guts out of that solid state combo and build this inside. Great for DIY Builds. All you need is a Chassis, Cabinet, & Speaker!!!
All Transformers are manufactured to our specifications by a Chicago Transformer company with over 50 years experience making high voltage Transformers for tube amplifiers.
Transformers are warrantied by the manufacturer against defects of materials & workmanship for 6 months from date of purchase. Get the iron hot.
Also includes A copy of the Original Fender Schematic, Layout, & Wiring Diagrams for our transformers. more information »
|
|
|
|
|
|
 |
SKU: GS1872883
15 watts, single 8" speaker, 2 channels (clean and overdrive), clean volume control; overdrive gain and volume controls; bass, middle and treble controls; MP3 input and headphone output jacks. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS1872893
Classic look of a Pignose amp with 10 watts (20W peak) of power, a single 6.5" speaker. Surprisingly loud for its size, this fully rechargeable, battery powered oinker can go from clean to snortingly crunchy with its "Squeal" overdrive control. Complete with 2 inputs, headphone out, on/off, tone, squeal, volume and AC adaptor/recharger cable. 10"H x 11-1/2"W x 6"D; 15 lbs. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS1874731
Stereo field expansion (SFX) acoustic amp, SFX pushes the sonic envelope to produce an amplifier system capable of projecting 300 degrees of rich stereo sound, two channels (vocal/instrument), vocal channel has 1/4" and XLR inputs, 1/4" input on instrument channel, stereo effects loop input jack for each channel, independent EQ on each channel, dual 80 watts RMS, 32 stereo digital effects, SFX matrix, Fender special design speakers, one 8", one 6", piezo horn, three button footswitch included, 22.7" x 22.8" x 11.5", 54 lbs. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS1874061
Now you can get the G-DEC sounds and features in a simplified and stylish version. 12 watts with a single 8" speaker. User friendly knob selection with 16 amp types, 15 special effects presets, 15 drum/bass accompaniment loops, metronome, key selector knob, tempo knob, separate controls for guitar volume and backing loop volume levels, and a built in E-tuner. MIDI connector for streaming files from a computer, Aux 1/8" in jack, and 1/8" headphone/line out jack on back panel. Black with silver grill. (Amplification Equipment) more information »
|
|
|
|
|
|
|
|
|
SKU: GS69747
I have three of these beauties, NOS and NIB. These are almost all gone from stores, and when ( and IF) you can find them they are commanding $50 and up per tube. One actually also has the 7025 on it. These are essentially the same as Sylvanias, as Phllips bought out Sylvania and continued using their parts & tooling. Fantastic, and tough tubes. perfect for your Marshall or type Fender circuit. They are in the original JAN boxes (all dated 4-87), and the blue printing on the tubes are all intact, as new NOS tubes should be.
My price is $45 ea (shipped CONUSA only) or $125 shipped for all three!
PayPal accepted ONLY if you are a verified member with a CONFIRMED address, otherwise, USPS Money ORDERS ONLY.
Please email me - serious inquiries only. I have over a 99% rating on eBay as "Crunchyriff" THANKS! more information »
|
|
|
|
|
|
|
SKU: GS1872732
NEW highly versatile all tube channel switching amplifier. Features footswitchable clean settings (65' Vibrolux, or 66' Bassman), a modern high-gain setting, and spring reverb. 1 x 12" Celestion Vintage 30 speaker, 60 watts with 6 12AX7, 2 12AT7 preamp tubes and 2 6L6 power tubes. Includes an effects loop, pre-amp out/power amp in jacks, 2 speaker output jacks (for main and extension speaker), and a 3/4" birch/maple plywood cabinet. 8.6" H x 25.3" W x 9.6" D, 32 lbs. Available in black with pepper grille, and blonde with oxblood grille. Vintage hardware, 3-button footswitch and cover included. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS1088514
Vintage Harmony Tube amplifier H305C. 1962 and all original in excellent condition. Unlike the H304, these have a 12 inch speaker, just like the Fender Deluxe and Ampeg Jet, and lots of power. Two channels, two volume controls and one tone control. Tube array is 2 6V6s, 2 12AX7s, 1 5Y3, all working just great. This little amp is a great blues, country, rockabilly amp. Contact me for more photos (we have 25 high resolution photos). I have a money-back guarantee on all my guitars and amps. more information »
|
|
|
|
|
|
|
SKU: GS1875865
250 watts, 2 Fender Special Design 8 ohm 10" Eminence speakers (4 ohm total), compression driver high frequency horn, -6dB input pad, bass, treble, low and high semi-parametric midrange, tuner out jack, tuner mute with flashing LED, XLR line out, compression, master volume, plywood cabinet, heavy duty spring loaded handles and a ported front. 63 lbs. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS2346845
Classic 50's Fender TV panel styling with lacquered tweed covering, TV panel style cloth, chrome top panel and black chicken head knobs. 150 watts, single 12" Celestion green label ferrite bass speaker, rear-ported, hybrid design with a 12AX7 tube preamp and class D power amp, 2 inputs (input 2 -6dB Pad), passive tone stack; gain/bass/middle/treble/volume controls; deep/bright switches, and an XLR out with ground lift. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS1874110
15 watts bass amp, 8" Fender speaker, volume, three band EQ, external speaker jack, headphone jack, black metal grille, 14.5" x 13.5" 9.5", 19 lbs. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS1873473
Get them while you can! Limited availability! Closed back 1x12" extension cabinets made to match the Fender Hot Rod deluxe series amplifiers. Available in all colors to match your limited edition amp. Features an 8 ohm 80 watt Celestion 12" speaker. (Amplification Equipment) more information »
|
|
|
|
|
|
|
|
|
SKU: GS2347117
40 watts, all tube, 2 EL34 power tubes (convertable to 6L6 or 6V6), 3 12AX7 and 1 12AU7 preamp tubes, GZ34 rectifier tube, Power Step power reduction (100/50/10% rated output), bright switch, gain control, grind and clean switches; 5-way voicing and thin/fat tone controls; tremolo frequency and intensity controls; reverb mix control with hi/lo switch and a master volume control. Back panel features include bias test points, Power Step 3-way switch, extension speaker jacks (parallel and series), main speaker jack with 4/8 ohm settings and trem/reverb/boost footswitch jacks (does not include footswitch). Custom solid pine finger-joined cabinet, custom wound transformers, cool light up logo and high grade black and burgundy covering. Made in USA. (Amplification Equipment) more information »
|
|
|
|
|
|
|