| Results For: | Gear Type: Effects
|  |
Filter:
|
SKU: 121126
SKU: 121126Fulltone Catalyst Fuzz Guitar Effects PedalFULLTONE CATALYST FUZZAlong came a little thing called Catalyst, a tiny little Distortion Generator that has none of the drawbacks of your standard Fuzz pedal. It is an incredible Fuzz/Distortion (with toggle switch set to Flame position) and works as a Phenomenal clean-boost, and overdrive as well (with toggle switch set to Spark) The Catalyst has what is known in the company as a Max-end-all 2 Band EQ that features an excellent hi-cut with a great Bass control having the proprietary ability to bring in incredible sounding midrange when the pot reaches around 3 o'clock on its rotation.Features# Operates as both fuzz distortion or clean-boost pedal# Max-end-all 2 Band EQ with hi-cut and Bass control# Raw and refined distortion with very few boundries# Perfect Fuzz to combine with any amplifier# Works well with wah and modulation effects unlike other fuzz pedals FREE s/h in the USA for any order greater than $200! WE SHIP WORLDWIDE! IE, shipping a used guitar, etc to most countries is $150 USPS to $275 UPS with insurance, excluding your country's import tax. Please contact us for your exact rate. more information »
|
|
|
|
|
|
|
THIS IS ONE OF THE COOLEST NEW EFFECTS WE'VE SEEN IN A LONG TIME (and we see a lot). The Pigtronix EP-1 Envelope Phaser features an incredibly fat and vocal, touch sensitive envelope phaser as well as a deep and chewy, univibe style rotary phaser with enough controls to dial in your own special sauce. It's an expressive, flexible, dynamic effect with a warm analog personality, versatile tone palette and a stage friendly interface. EP-1's EF trigger input allows an instrument's sound to be phase modulated by an external audio source such as a drum machine or laptop beat. This side chain input can even be used as an FX loop for maintaining accurate envelope response when using other effects in line before the EP-1. The Envelope Phaser also features footswitchable phase inversion, expression pedal speed control for mind bending rotary speaker effects and can even be used as a clean analog fat booster. more information »
|
|
|
|
|
|
|
The Electro-Harmonix 2880 offers the familiar control setup of a multitrack digital recorder plus flexible looping capabilities and track manipulation control. Multiple loops, in stereo and mono, can be pitch shifted, reversed and manipulated on four recording tracks. These four tracks can then be moved to two mixdown tracks, freeing them up to be reused. Flexible punch in/out is available on any recording track, allowing the musician to achieve "Looper Perfection" with the 2880. Complex multitrack loops may be created and overlaid in a performance situation with easeThe 2880's non-compressed audio delivers 16-bit/44.1kHz CD fidelity while providing audio storage of 480 seconds for each of the six available tracks when using a 256MB CF card. It comes with 128MB CF card and is comptable with cards up to 2GB. With external in/out MIDI clocking, it also provides automatic format conversion to Mac or PC via USB. more information »
|
|
|
|
|
|
|
|
 |
SKU: GS3081288
The LEVANA BLACK is our version of a powerful, high gain modern style distortion unit featuring our signature "Scale" (tm) control for a wide tonal spectrum of distortion characteristics.
Please visit www.studiobluellc.com for technical specifications and order information. more information »
|
|
|
|
|
|
|
SKU: GS61022
The DB-1 was designed to react precisely to even the fastest of playing, while still being able to deal with strong signals such as chords. In addition, the TM-1 will retain the full spectrum of tone present in the original signal without the volume peaks and dips common to other filters. Its multiple controls (Sensitivity, Up/Down Drive, Width & Attack) allow precise adjustment to the responsiveness and degree of the effect, while its proprietary circuitry allows the DB-1 to be used for Guitar, Bass, or Keyboards with equal effectiveness and dead-on tracking. Simply put, it's more Mutron-ish than any Mutron we\'ve heard, with just the right amount of squiggle and squawk to get the party started. more information »
|
|
|
|
|
|
|
|
|
|
|
SKU: GS20261
True Bypass switching with minimal popping.
LED for on/off. NOS Germanium Transistor chosen for low noise and best tone. Three-way, short and sturdy toggle switch for tone selection:
Middle: "HI" Standard Dallas Rangemaster tone, treble enhanced.
Up: MIDs, more of a full range boost.
Down: LOW, full range sound with a bit more bassy setting.
Optional PUSH PULL volume pot (Add $15)allows two tone settings:
Down: "HI" Standard Dallas Rangemaster tone, treble enhanced.
Up: MIDS, more of a full range boost, great for Fender guitars!
* This can be reversed at order time if desired, or changed to Full and Bass settings.
Volume Control allows substantial boost.
Can boost volume quite a bit. Has about the same output level ON and OFF with the vol knob set at 9:00. At 11:00 there is about a 10dB boost, which sounds twice as loud. At 12:00 there is a 13dB boost, and up all the way is about an 18dB boost which is nearly twice as loud as it was at 11:00.
Durable Grey Hammertone (like original) powdercoated cast alloy case.
Silk Screened graphics as seen on the pedal at the very top of the page.
Circuit hand-wired point to point like the original. No circuit board used. I won't claim this is better than using a quality circuit board, but it works very well for this pedal. It does takes us more time to build them.
All can use a 9V Battery, a Boss style power jack is optional for $10.
This pedal uses only 5mA of power when on (LED) and barely any power when off (under .2mA!) so the battery will last hundreds of hours.
We usually run the BEANO BOOST directly into the input of your tube amp, with no buffers (i.e. tuners, or non-true bypass pedals) in the signal path. Most people have found they work best near the very beginning of your signal chain. Like the Fuzz Face, the Beano Boost MUST NOT have a buffered pedal in front of it. Something like a Boss pedal, even off, will make the Beano Boost sound VERY trebly and thin. more information »
|
|
|
|
|
|
|
The DigiTech Grunge Distortion Pedal is designed for loud, distortion-obsessed guitarists who want an edge-of-chaos sound. The Grunge provides chunky rhythm, heavy grind, and amazing sustained leads. It's been a top seller for over a decade. Not buzzy like other metal pedals. Includes Loud (level), Low, High, and Grunge (distortion) controls, as well as an amp output and dedicated mixer output with cabinet emulation circuitry. more information »
|
|
|
|
|
|
|
Full range of switching options with the best possible reliability and tone! more information »
|
|
|
|
|
|
|
|
|
The Lava Flow line selector significantly reduces pedal board tap dancing and makes it easier to quickly get the effects you need while using one- or two-amp setups. more information »
|
|
|
|
|
|
|
SKU: GS8596
Danelectro
SURF & TURF
mini Pedal
COMPRESSOR
Fat rich bite...
LIST:
$49.00
more information »
|
|
|
|
|
|
|
The Maxon Vintage Jet Riser combines a VCA, VCF, and analog flanger circuit to recreate the thunderous jet-plane swoosh of the 1970s Jetlyzer. more information »
|
|
|
|
|
|
|