|
The large diaphragm Neumann TLM-103 Microphone is at home in even the finest project studios. Provides platinum-quality sound on a bronze budget. Neumann uses transformerless circuitry for ultralow self-noise and this mic handles sound pressure levels up to 138dB. Cardioid polar pattern optimizes attenuation of unwanted sound and suppresses feedback. The TLM-103 Microphone has a protective wire mesh grille that protects the capsule and prevents pop noises. Frequency range: 20Hz to 20kHz. Impedance: 50 ohms. Requires phantom power. more information »
|
|
|
|
|
|
|
An affordable choice for both backup and lead vocals. Includes XLR to 1/4" phone cable. more information »
|
|
|
|
|
|
|
Although Eric Johnson is best known as a Strat player, he has always played humbucker-equipped guitars as well. After getting a new 1959 Les Paul re-issue, Eric asked us if it could be made to sound like an old Gretsch Country Gentleman guitar. We said, " more information »
|
|
|
|
|
|
|
Cutting-edge reverb, delay, and modulation from one of the best-respected names in the biz. more information »
|
|
|
|
|
|
|
When it's time for the tune to scream, add growl and grittier tones to an amp with a wimpy overdrive. more information »
|
|
|
|
|
|
|
SKU: GS63128
Kit includes all parts and instructions necessary to build a complete, a playable bass.
Body is made of all-select Basswood with shaping and routing already complete.
Solid select Maple neck with a fretted Rosewood fingerboard.
Headstock is a blank paddle-head shape with tuning machine holes pre-drilled.
Adjustable truss rod.
All hardware is heavily chrome plated.
Electronic parts are mounted to the pickguard and ready for installation- no soldering required.
All holes are pre-drilled.
Complete with strings and electric cord. more information »
|
|
|
|
|
|
|
|
|
The all-wood Steinberger. The left-handed Spirit GT-Pro takes its innovative shape, hardware and construction from its composite cousins, but uses solid wood to achieve outstanding sustain, exceptional tonal response and a bright, clear sound. more information »
|
|
|
|
|
|
|
SKU: ULB28917
ULB28917 This is just about the coolest little lap steel set that we've seen in years! Although the set bears no name plates, it's pretty safe to say that this was made in the same factory as the Supro models. The lap steel is a graceful "Spanish" shape with single pickup with volume and tone controls placed on either side of the pickup. The matching amp continues the less-is-more approach with single volume control, 1x6" field coil speaker. Ultra hip and seldom seen! Original faux alligator chipboard case for lap steel included. more information »
|
|
|
|
|
|
 |
SKU: GS3038776
The Guild CV-2 Acoustic Guitar has a solid red spruce top, solid flame maple back and sides with scalloped red spruce bracing. Made with the F-40 body style that has been in the Guild line since 1955, the CV-2 guitar incorporates new technologies like the patent pending Guild Graphite Neck Block System for exceptional tone, playability, and longevity. Rich features include a bound ebony fingerboard, ebony bridge, abalone dot inlays, and ivoroid body binding.
You'll find the Guild CV-2 to be just what you're looking for. In addition to a great price, the Guild has a more "woody" tone and is road-worthy without compromising sound and playability.
Guild Contemporary Series CV-2 Acoustic Guitar Features:
* Body Style: F-40
* Top: Solid Red Spruce
* Bracing: Guild Scalloped Red Spruce
* Back: Solid Flame Maple
* Sides: Solid Flame Maple
* Bridge: Ebony
* Neck: 1-Piece Mahogany (Bolt-On)
* Fretboard: Ebony (12" Radius)
* Width at Nut: 1-3/4"
* Frets: 21
* Scale Length: 25-1/2"
* Hardware: Nickel
* Machine Heads: Gotoh 700 Series Open-Back Tuners
* Finish: High Gloss (Thin Nitrocellulose Lacquer)
* Unique Features: Patent Pending Locking Graphite Neck-Block Bolt-On Neck System with Sound-Directing Graphite Spider Support System, Dual Locked Graphite Neck Reinforcement Tubes, Scalloped Red Spruce Braced Top, Abalone Dot Position Inlays, Bone Bridge Pins, Bone Nut, Streamlined Compensated Bone Saddle, Guild Rosette of Madagascar Rosewood, Vintage Script Mother-of-Pearl Guild Headstock Logo, Contemporary Mother-of-Pearl Guild Headstock Shield
* Guild Contemporary Series CV-2 Acoustic Guitar Includes:
* Guild Deluxe hardshell case
The only issue - small nick on top of headstock.
For more info call Darryl at Megatone, 404-310-9356 or go to www.megatonemusic.com
Thanks more information »
|
|
|
|
|
|
|
The left-handed Dean Edge 09 is a great starter electric bass guitar that plays well and sounds great. Features a basswood body, maple neck, and rosewood fingerboard with abalone dot inlays and 22 frets. Equipped a single soapbar pickup, chrome hardware, and diecast tuners. more information »
|
|
|
|
|
|
|
Our buyers—experienced players themselves—went to Paul's Maryland shop where they handpicked a group of knockout guitars with the most stunning tops, unusual appointments, and the lightest bodies.The Paul Reed Smith Custom 24 has a special 25" scale length coupled with a comfortable regular shape that gives this electric guitar exceptional playability. Abalone bird inlays adorn the 24-fret rosewood fingerboard and a maple body edge highlights the classic PRS double cutaway guitar body. All hardware is nickel including a PRS tremolo bridge, and Phase II locking mini tuners. Includes case.The Custom 24 electric guitar produces a broad spectrum of tones with a PRS HFS pickup in the bridge position and a PRS Vintage Bass pickup in the neck position. The PRS HFS is a powerful pickup with a balance of aggression, clear highs, strong mid-range, and strong bass. The PRS Vintage Bass pickup has a warm high-mid sound that's excellent for rock or jazz. A push/pull tone control splits the coils of the 2 pickups. The Custom 24 is an electric guitar with a timeless classic look that you will be playing for years. more information »
|
|
|
|
|
|
|
Faded Maple Leaf finish. Rare select carved figured top. New nylon nut material. Thinner fingerboard. Ultrathin nitrocellulose lacquer finish. 24-3/4" scale length. '59 rounded neck profile. Trapezoid inlays. Gibson BurstBuckers pickups. Thin single-ply white binding on neck. Nickel hardware. Faithful recreation to original 1959 Les Paul Standard specs. Vintage correct body shape. Taller, vintage correct neck heel. 3 degree angle pickup route. Lightweight aluminum stopbar tailpiece. Wireless ABR-1 bridge. Snug fitting brass bridge saddles. Vintage correct thumbwheel material and shape . Vintage correct bridge post material and shape. Historically correct backplate and switchplate material and shape. Vintage correct pickguard shape and placement. Vintage correct strap button placement and screw size. Back and top thickness. Vintage tulip tuners. "50s style electronic wiring. Audio taper CTS potentiometers. Vintage correct dial pointers. Bumbl more information »
|
|
|
|
|
|
|
The MX202 Microflex condenser microphone captures Shure quality sound in a compact, adjustable package. The MX202 features a condenser microphone cartridge attached to a flexible, 4" gooseneck with a 30' cable. The inline preamp offers easy microphone stand or ceiling installation, and when combined with the high sensitivity cartridge's wide frequency response, this microphone provides accurate sound reproduction with a minimum of RF interference or electromagnetic hum. Includes mic stand adapter.Also available with a plate-mounted preamp (see product # 270396). Requires phantom power. more information »
|
|
|
|
|
|
|
|