|
SKU: GS1666
Graham Oliver was recording with his band Saxon in Atlanta with Jeff Glixman, the record producer, in the 1980’s. Jeff met someone who had a very rare early Gibson V and told them to fetch it to the studio, which they did a few days later, and Jeff bought it. Graham asked if they ever came across a black Flying V like Hendrix’s with Trini Lopez inlays (not realizing there was only one). The Dealers said they new someone that had a Relic® from a Jimi gig in ‘68 in Atlanta; Graham expressed an interest and about a week later they came with this neck - the head stock was split off below the machine heads where the FENDER® Logo would be, and it was stamped 13 Oct 67, and stamped “demo” on base also - it had traces of car spray paint on it as well, an almost identical lot was sold as lot 103 at Sotheby’s in 87 from the Albert Hall 69. On Graham’s return from the USA, he took the neck to luthier Stuart Palmer, who restored the neck with a piece of maple, and stripped it of paint, and put in heavy frets as a couple were missing; it came out great! In 1985 Saxon employed John Downing (or “Upsy”) - he worked for Jimi, January to August 1969 and is in many photos from that time - John confirmed that FENDER® supplied the Experience with necks marked “demo”. To be sold neck only; as is (restored). Comes with letter from Graham Oliver. 12,000 Britsh Pounds Sterling. more information »
|
|
|
|
|
|
|
SKU: GS63083
FENDER Vint. Noiseless Tele Pick-Ups
SET.
GENUINE FENDER PART
Bridge Position Pickup is 8.6K Ohms.
Neck Position Pickup is 12.0K Ohms.
Sounding like a 60's Tele without the 60-cycle buzz, that's the Vintage "Noiseless" Tele pickup. Made with the same technology as the "Noiseless" Strat, but voiced for that traditional Tele tone. Special Alnico 5 magnets and enamel coated magnet wire along with Fender's® "Noiseless" technology produce a unique vintage sound that is quiet. The neck pickup has a nickel-silver cover for added clarity while the bridge pickup was developed to produce the traditional "twang" you'd expect from a Telecaster. Each pickup sports a very stylish "Noiseless" logo. more information »
|
|
|
|
|
|
|
SKU: GS63068
FENDER Hot Noiseless Strat Pick-up
For Neck or Middle Position.
GENUINE FENDER PART
10.4K Ohms. more information »
|
|
|
|
|
|
|
SKU: GS63164
SPERZEL 3+3 Trim-Loc GOLD
Eliminates tuning problems caused by windings around normal tuning pegs. more information »
|
|
|
|
|
|
|
SKU: GS63174
SPERZEL 6 in Line Trim-LocTuners GOLD.
Eliminates tuning problems caused by windings around normal tuning pegs. more information »
|
|
|
|
|
|
|
SKU: GS63074
FENDER Lace Sensor Strat PU GOLD
GENUINE FENDER PART
5.8K Ohms
Low noise and high output for incredible response and sustain. Fender-Lace™ Sensors continue to be some of our most popular pickups to date. Each color represents a different sound: Gold is the classic Vintage Strat sound with glassy bell like tones (used on the Clapton and Buddy Guy
Stratocasters). more information »
|
|
|
|
|
|
 |
SKU: 7440K
Factory made in Southern California, the 7440 Hybrid combines simplicity of design with full adjustability. Height, intonation, and string spacing adjustment allow bassists to set instruments up to their exact specifications. You can easily achieve a 13mm and up string spacing.
Kahler fixed bass bridges feature quick, easy string-up and awesome sustain. To accomplish this, they use a steel adjustable mounting plate designed with an intonating angle, and 3/8x40 pitch steel saddle witness points. A bassists ultimate fantasy bridge!
All 7440's come with everything you need to install them easily. Routing is not required for this model but it may need to be countersunk to achieve the proper action.
For fan fret basses or steeply staggered intonation, you can simply remove the base plate and attach each saddle directly to the body. more information »
|
|
|
|
|
|
|
SKU: GS1065922
Original 1970s 3-way switch. The same switch was used in Telecasters and Stratocasters in late '60s, early '70s. more information »
|
|
|
|
|
|
|
SKU: GS1065907
These original tuners came right off a 1967 Telecaster. Restore yours now! more information »
|
|
|
|
|
|
|
SKU: GS62990
FENDER Accessory Kit White
GENUINE FENDER PARTS
Do you want to change the look of your Strat without spending a lot of money on a paint job? Try sprucing it up with a Strat Accessory Kit. Everything you need to personalize your Strat.
Includes:
Volume & tone knobs, tremolo knob, switch tip, tremolo back plate, and pickup covers more information »
|
|
|
|
|
|
|
SKU: GS62992
Bigsby B3 Custom Kit for Arch Top Solid & Hollow Body style guitars (Sheraton II , LP ,Casino, ES 335, Riviera, Silver Jet, etc.... Bigsby logo sand cast in it's polished aluminum. more information »
|
|
|
|
|
|
|
SKU: GS63028
FENDER J-Bass PICKGUARD 10 screws.
3-Ply, White/Black/White
GENUINE FENDER PART more information »
|
|
|
|
|
|
|
SKU: 7216K Soloist
Factory made in Southern California, the 7216 sports a brass cam with teflon/glass string rollers for a much louder and fuller tone with longer lasting sustain than steel. This model is a mix cutter. The brass cam gives the 7216 a wide bottom while the teflon rollers create a quick attack with stronger mids. Rest assured, the masses will hear you when you slice thru the mix slinging this trem around! Every note sings out with pleasure and is clearly articulated over the mix. Dubbed the "Soloist" this model is great for a lead guitarist, but don't be fooled into one type of playing. Your regular chords can now throw off REAL fat power hungry power chords better than any model. Did you see the video?
This model is made for arched top or flat guitar bodies with Tune-o-matic style bridges (TOM's). See the 7216 Specifications. The stop tail post spread should be 3.250" (82.5mm). Les Paul's, SG's have TOM's are a good example. This will also replace the similar "Gibson stamped" 2230 model without modifications.
All 7216 "Soloist" comes with everything you need to install it easily. more information »
|
|
|
|
|
|
|
SKU: GS63084
FENDER TEX-MEX Strat Pickup
SET
GENUINE FENDER PART
Neck & Middle pickups 6.4K Ohms each.
Bridge Pickup is 7.4K Ohms.
Like a fiery bowl of Texas picante! These overwound vintage style Strat pickups offer increased output, sparkling highs and a very nice warm tone while retaining your favorite vintage Strat characteristics. Constructed with Alnico 5 magnets and polysol magnet wire and featuring a reverse wound/reverse polarity middle pickup for hum canceling in positions 2 & 4, these pickups scorch. OEM on the Jimmy Vaughan Stratocaster. Available in white only. more information »
|
|
|
|
|
|
|
SKU: GS62998
Bigsby B700 Custom Kit for Arch Top Solid & Hollow Body style guitars ( LP ,Casino, Riviera, Silver Jet, Duo Jet, etc.... Bigsby logo die cast in it's BLACK polished aluminum. more information »
|
|
|
|
|
|