|
A PRS with a cool retro vibe! This Mira Flame Maple Top has a mahogany back, maple top, and a 24-fret fingerboard with bird inlays and a 10 radius. The neck has a 25 scale length with a fast wide-thin profile. more information »
|
|
|
|
|
|
|
|
|
With the neck bolted deeper into the the body by an extra-fret, you get a bigger sound on the Godin Exit 22 while retaining an extremely comfortable feel and balance thanks to the short scale and sculpted, heelless neck joint. Monstrous distortion tones are easily dialed in via the bridge-position humbucker and stinging clean sounds are at your fingertips thanks to the single-coils in the neck and middle position. The electric guitar's solid mahogany body and rock maple neck have a semi-gloss finish for a sleek feel. more information »
|
|
|
|
|
|
|
The exquisite hand-picked PRS 513 Amber Flame Top electric guitar features a carved flame maple top beautifully finished in violin amber, a mahogany back and neck, rosewood fretboard, PRS tremolo bridge, and the patented 513 pickup system which provides 1 more information »
|
|
|
|
|
|
|
George Benson signature series hollow-body electric jazz guitar with floating GB Special pickups and 3-piece maple neck. more information »
|
|
|
|
|
|
|
|
|
The Kramer Striker Custom Electric Guitar is equipped with a stop 7 bar tailpiece and Tune-O-Matic bridge for killer tone, great sustain and excellent tuning ease and stability. Featuring a hard maple K-Speed Elliptical Slim Taper ™ neck, a solid alder double cut body and flame maple top, the Kramer Striker S-424CR Guitar is ready to rock. Two Quad Rail pickups and one Dual Rail pickup pump out the power, and a 5-way pickup switch plus tone and volume knobs provide lots of tone options. more information »
|
|
|
|
|
|
|
SKU: GS22679
These are the guys that make the top notch Deans this flying V is amazing go to their website www.usmasters.com this is made in the USA in Wisconsin
top notch they also make lower end models overseas this is their topnotch stuff, also supplioed is a Ritter gig bag to fit the flying V along with the hard case more information »
|
|
|
|
|
|
|
|
|
Are you ready for a single cutaway with no sacrifices? One with every feature needed to build the ultimate guitar? Then the Michael Kelly Patriot Custom is your new favorite guitar. It starts with an extra deeply carved maple top on a hand-selected mahogany body. The set-in neck is tightly fit to assure maximum sustain and performance. Installed in this best-in-class body is a set of pickups developed especially for this guitar, built using the same classic all USA Made components as many collectible humbuckers. To give the Custom a high output edge while retaining a deep rich tone requires exacting specifications, including a special overwound technique. Normally, humbuckers are mounted from plastic rings, suspending them apart from the full vibration and tone of the body. These are attached directly to the maple and mahogany body to draw every ounce of sound out. The coil splitting allow you to switch each pickup from a full humbucker tone to a single-coil tone with a simple push-pull pot. An ebony fingerboard, recessed control knobs, Grover tuners, real abalone block inlays, TonePros locking bridge and an amazing flame maple top complete this amazing package. more information »
|
|
|
|
|
|
|
Carefully developed in close cooperation with Jett herself, Gibson's Joan Jett Signature Melody Maker features a lightweight, slab mahogany body with a Worn White finish.The slim-tapered neck profile is handcrafted to the same specs as Jett's original guitar, with an ebony fingerboard and Gibson's classic, silk-screened gold logo on the headstock.The mini-Grover tuners, and authentic witch hat control knobs are exactly as they are on Jett's guitar.A kill switch replaces the normal Gibson toggle switch, and the body is outfitted with a period-correct black vinyl pickguard.The classic, snarling growl of Jett's original Melody Maker is accurately captured by a single Gibson Burstbucker 3 zebra humbucker, slightly overwound with asymmetrical coils, unpolished Alnico II magnets, and all the punch and power of an original Gibson "Patent Applied For" pickup.Add some typical Melody Maker appointments: 24-3 4-inch scale length, and standard Gibson Tune-O-Matic bridge and stopbar tailpiece-and the result is a painstaking and heartfelt tribute to one of the most fearless, groundbreaking artists in rock and roll.Each Joan Jett Signature Melody Maker comes with a Gibson USA hard case."I got my Melody Maker in 1977," the legendary Joan Jett says about the guitar she has made one of the most iconic instruments in rock and roll. "It was light and it sounded great. It was the guitar I had in The Runaways and then played on all my hits, like 'I Love Rock N' Roll' and 'Bad Reputation' and 'Do You Wanna Touch Me.' It's my baby."The Gibson Melody Maker Electric Guitar was introduced in 1959 and priced for the beginning player but has been used by many well-known rockers since then, including Joan Jett. more information »
|
|
|
|
|
|
|
SKU: GS22045
A great sounding original Junior, medium/lightweight body and one very lively P-90 pickup. Vibrant sunburst finish on top with minimal fade, the sound of rock'n'roll heaven when cranked. Great playing and very nice condition; one tiny and almost undetectable repaired stress crack to the back of the headstock (you really have to look for it!) and some wear to the back of the neck. For some reason someone long ago drilled two extra string holes thru the bridge/tailpiece; not real obtrusive but odd! With modern HSC. more information »
|
|
|
|
|
|
|
SKU: GS39947
TIGER EYE/SEMI-HOLLOW W/F-HOLES/24.75 SCALE/MAH. ON FLAME TOP BODY/MAH. ON BRAZ. NECK/MATCHING FLAME MAPLE HEAD STOCK/1 11/16" NUT SIZE/ROUND BACK MED/LARGE NECK SHAPE/12" RADIUS/CHROME HARDWARE/VINTAGE FLAT MOUNT BRIDGE/6105 FRETS/LINDY FRALIN H-H UNBUCKER 8K, 9K PICKUPS/VOL. TONE 3-WAY PUSH-PULL ON TONE ELECTRONICS (314)781-7500 more information »
|
|
|
|
|
|
|
|
|
In a very short time frame, the PRS Mira electric guitar has attracted players from all genres. Like all PRS guitars, the Mira is comprised of the finest woods and materials available. This Mira guitar has a mahogany back, maple top, and a 24-fret fingerboard with moon inlays and a 10" radius. The neck has a 25" scale length with a standard PRS profile. Other features include chrome hardware, locking tuning pegs, Mira treble and bass pickups, volume, tone, 3-way blade and a mini toggle coil tap. more information »
|
|
|
|
|
|