| Results For: | Gear Type: Miscellaneous
|  |
Filter:
|
The Neumann TLM 103 Anniversary Stereo Microphone Set includes 2 matched TLM 103 Microphones and 2 EA 1 Elastic Suspension Shockmounts in a sturdy metal travel case.The Neumann TLM 103 large diaphram microphone is new standard for home recording and the music industry. By utilizing the tried and true transformerless circuit found in numerous Neumann microphones, the TLM 103 features yet unattained low self-noise and the highest sound pressure level transmission. The capsule, derived from that used in the U 87, has a cardioid pattern, is acoustically well-balanced and provides extraordinary attenuation of signals from the rear. The TLM 103 is the ideal large diaphragm microphone for all professional and semi-professional applications requiring the utmost in sound quality on a limited budget.Polar pattern The TLM 103 is equipped with a large diaphragm capsule with cardioid pattern. By focusing on this pattern â€' used in most recording situations â€' the attenuation of unwanted rear sound has been optimized. Off-axis sounds are rendered naturally while isolation is increased. This also leads to a high feedback suppression when the microphone is used in live situations or where loudspeaker playback is a factor.Acoustic features The TLM 103 is addressed from the front, marked with the red Neumann logo on the microphone body. The K 103 large diaphragm capsule is based on the K 87, well known from the U 67 / U 87 microphones. The capsule has a flat frequency response up to about 5 kHz, and above that, a wide flat 4 dB presence boost. The large wire mesh headgrille protects the capsule from plosive sounds and effectively prevents pop noises. These characteristics are achieved without resorting to corrective resonance effects. Therefore, the microphone maintains an excellent impulse response and reproduces the finest details of music and speech without coloration.Electrical features With just 7 dB-A / 17.5 dB CCIR the self-noise level of the TLM more information »
|
|
|
|
|
|
|
The dbx 1074 QuadGate is based on the legendary dbx V2 VCA and offers 4 channels of gating with threshold, depth, and release controls on each channel. It has gold-plated, balanced XLR and 1/4" inputs and outputs, and 1/4" key inputs. An internal filter can be independently activated and controlled on a channel-per-channel basis, allowing you to clean up tracks and have frequency selective control on each gate. An absolute must for those who require quad gating. more information »
|
|
|
|
|
|
|
StudioLive seamlessly integrates a professional digital mixer with a complete multi-channel recording system featuring 16 inputs; 6 aux mixes; 4 subgroups; 16 class A mic pres; hi-definition A/D converters; 28 compressors, limiters gates, and high-pass fi more information »
|
|
|
|
|
|
|
The Crown® CDi 2000 power amplifier is a professional tool designed and built for installed sound applications. Rugged and lightweight, it offers incredible value in its class. It features an intuitive front-panel LCD screen to guide installers through configurations, and also offers onboard DSP for loudspeaker signal processing. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan-assisted cooling, removable Phoenix-style inputs, barrier strip outputs for low-Z or 70V/140V loads, short-circuit protection and more. Your investment in a CDi-Series power amplifier is backed by Crown's Three-Year, No-Fault, Fully Transferable Warranty. more information »
|
|
|
|
|
|
|
Features sophisticated protection circuitry. 5-way fault indicator. Red peak clip LED on each channel. Green signal-present LED that flashes when the level is extremely low. Detented level controls. Mode select switch for stereo or bridged. 3-speed more information »
|
|
|
|
|
|
|
The Shure ULXP14D Dual Wireless System for guitar and bass comes with two ULXP4 Diversity Receivers, two ULX1 Bodypack Transmitters and two WA302 cables. Shure ULX Standard UHF systems represent a breakthrough in performance and price for both working musicians and professional sound installers. ULX Professional systems offer more advanced features and controls, including lockable settings and group scan function. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel. ULXP4 Wireless Diversity Receiver The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. The ULXP4 offers an exceptional value in both performance and price, for both working musicians and sound installers.ULX1 Wireless Bodypack Transmitter The low-profile, highly durable body-pack ULX1 has all the characteristics to meet the demands of high performance. For use with headworn, lavalier and instrument microphones, as well as guitars and basses. Attaches to belt, waistband or guitar strap with clip for hands-free mobility. WA302 Instrument Cable The WA302 instrument cable connects the ULX1 body-pack transmitter to a guitar or other instrument. Features a 2.5 foot (.75 m), length with 1/4-inch plug and 4-pin mini connector (TA4F). more information »
|
|
|
|
|
|
|
Analog audio I/O (All specifications are given with the factory reference level of -16dBFS.). MIC inputs (channels 1 through 24): Balanced XLR-type female connectors, Adjustable input level: (-60dBu (TRIM max) to -4dBu (0dB pad)), (-40dBu (TRIM max) to +16dBu (-20dB pad)), Input impedance 2.2k ohms . PHANTOM (+48V): +48V phantom power. Switchable in blocks of 4 channels . (1-4, 5-8, 9-12, 13-16. 17-20, 21-24) . LINE IN (BAL): inputs (channels 1 through 24): Balanced 1/4" jacks, Adjustable input level (-44dBu (TRIM max) to +12dBu (TRIM min), Input impedance 10k ohms . INSERT connections (channels 1 through 24): 1/4" TRS jacks, Send: nominal output level -2dBu, maximum output level +14dBu, impedance 100 ohms, Return: nominal input level -2dBu, headroom 16dB, impedance 10k ohms . ASSIGNABLE RETURNS (BAL) (1 through 8): Balanced 1/4" jacks, Nominal input level: +4dBu, Headroom: 16dB , Input impedance: 5k ohms . ASSIGNABLE SENDS: (1 through 8) Pseudo-balanced more information »
|
|
|
|
|
|
|
The Allen & Heath ZED-24 audio mixer has a fantastic pedigree: nearly 40 years of making mixing desks for professional sound engineers. The ZED-24 mixer's audio circuitry is based on years of continual development and refinement. All the elements within the mixer have been perfected to insure the very best sound quality possible. This is a mixer with broad appeal, from entry-level to professionals. You get fantastic sound, rugged build quality, and imaginative features. The ZED-24 mixer is equally happy running your gig on stage, recording live, or mixing down in your studio at home. The features are incredibly advanced for a mixer at this level. The ZED 24 has 23 independent sources to the mix, 10 independent outputs, 4 aux sends (2 pre and 2 post fade), a USB send and return for PC or Mac recording, playback and effects, a unique dual stereo input capability and some very advanced monitoring facilities.In fact, the ZED-24 mixer is so packed with great features that you'd think it would cost much, much more! In addition to 16 mono channels there are 4 stereo channels, each with a main stereo input on jack sockets and the ability to take additional stereo inputs from phono sockets or from the USB audio input, enabling you to control and route any source. The ZED-24 mixer features a responsive 3-band swept-mid EQ, with an optimized slope for equalizing individual instruments. The ZED-24 also features high quality DuoPre pre-amps, which use a two stage design, with carefully controlled amounts of gain in each stage, offering lots of headroom. Allen & Heath includes the excellent SONAR LE digital audio workstation software for Windows with the ZED-24 multipurpose mixer. With audio and MIDI multi-track recording and mixing capability, effects plug-ins and editing features, SONAR LE enables the ZED-24 audio mixer to become a live sound, recording, or home recording mixer. more information »
|
|
|
|
|
|
|
The 8-channel Octane preamp is specifically designed to enhance the front end of any multitrack digital recording system. Its award-winning M-Audio preamp technology delivers pristine digital signals to any Lightpipe-compatible devices such as hard-disk r more information »
|
|
|
|
|
|
|
The CVP-2153 from Cerwin-Vega is a dual 15" 3-way PA speaker in the CVP series of full-range passive systems. The CVP-2153 features two custom-designed 3" voice coil 15" woofers (2,000W peak) and a Mylar high-frequency driver to create smooth response even at high dB levels. This speaker is designed for performers looking to step up to professional-quality sound reproduction with versatile features and performance.The CVP-2153 speaker also includes Cerwin-Vega's striking, rugged cast-aluminum grille that is Cerwin-Vega's trademark. Combining a CVP full-range speaker with its C-Series folded horn and CVP passive direct-fire subs creates the ultimate in performance-matched PA systems from the company that knows bass—and now full-range systems. more information »
|
|
|
|
|
|
|
The Audio Technica ATW-701 UHF Guitar Wireless System includes the ATW-R700 receiver and the ATW-T701 UniPak transmitter with AT-GCW guitar/instrument input cable. The ATW-701 UHF Guitar wireless system delivers professional features and sound quality unheard of in its class. This easy-to-use wireless microphone system features eight selectable frequency-coordinated channels, diversity operation for increased range/reliability, manual and automatic frequency scanning, Tone Lock squelch and more. The ATW-701 system provides a choice of eight PLL synthesized UHF frequencies in the 542-561 MHz band (TV channels 26-29). For multiple-mic applications as many as eight systems may be used together. ATW-R700 Receiver The ATW-R700 receiver features diversity reception. Logic circuitry monitors reception, selecting the superior signal from two antennas, providing better sound quality and reducing the possibility of interference and dropouts. Soft-touch controls provide convenient access to selection of operating frequency and automatic scanning, while an LED display indicates selected channel and scanning operation. The ATW-R700 receiver also features a sophisticated Tone Lock tone squelch system that opens the receiver's audio output only when a 700 Series transmitter is detected, reducing the possibility of interference.ATW-T701 Body-Pack Transmitter The versatile ATW-T701 UniPak body-pack transmitter has both low- and high-impedance inputs plus a bias connection, for use with dynamic and electret condenser microphones, as well as Hi-Z instrument pickups. The UniPak transmitter also offers separate trim controls for guitar and microphone, plus switchable high/low RF power. The ATW-T701 uses two 1.5V AA batteries for economical operation and wide availability and also features a multicolor Power/Mute/Battery indicator.AT-GCW Guitar Input Cable AT-GCW Guitar Input Cable has a 1/4" phone plug to locking 4-pin connector for use between instrument and Audio Technica Uni more information »
|
|
|
|
|
|
|
SKU: GS3055558
The SR series integrated mixer/amplifiers have been designed for easy setup and simple but versatile operation. Requiring only the addition of microphones and speakers, the SR powered mixers are self-contained sound reinforcement systems, with features and performance generally found only in units costing much more. Each of the 6 input preamp channels provides a balanced XLR MICROPHONE input with switchable phantom power for condenser microphones, a 1/4’’ phone jack LINE input, MAIN level control, LOW, MID, and HIGH frequency tone controls, MON. send control and an EFF./REV. send control. The master section features MAIN MASTER, MON. MASTER, AUX. LEVEL, and DIGITAL REVERB and EFFECTS level controls, a GRAPHIC EQUALIZER, and a versatile patch bay. The SR series mixers include DELTACOMP, an adaptive compression system. DELTACOMP is a high performance power amp limiter that senses amplifier error due to clipping, and automatically reduces the gain until the distortion is minimized. A fro more information »
|
|
|
|
|
|
|
Developed for computer voice recognition applications, the Shure 503BG gooseneck microphone offers excellent voice fidelity while reducing background noise. The 503BG mic features a low-impedance, moving coil type transducer with an integral humbucking coil and an attached 2-conductor shielded cable with a built-in strain relief. It produces a frequency response with an essentially constant output voltage over the voice spectrum when used close to the sound source. The 503BG mounts to a gooseneck (not included), a fixed pipe or a microphone stand using a standard 5/8"-27 thread. It comes with an aluminum case with a black enamel finish.The 503BG mic maximizes performance in close-talking applications through its tailored frequency response, directionality and distance discrimination. It optimizes and controls sounds within the 100 to 7000 Hz frequency range and reduces sounds outside that range. The Shure microphone rejects noise through its inherent directional properties and discriminates against distant sounds in favor of close-range sounds. This gooseneck mic is highly suitable for close-talking applications such as paging and talkback. more information »
|
|
|
|
|
|
|
The Rolls DB25 is a direct box, input signal pad, and ground lift all in one. Includes an attenuator to cut the signal from speaker or line outputs. more information »
|
|
|
|
|
|
|
|
|