|
|

|
Warms up and smoothes out the sound of 25-1/2 scale trem guitars. More power than a PAF©, but with a finer touch than high-output models. Picking hard generates a lot of voltage, but a softer attack will clean up the sound of an overdriven amp. more information »
|
|
|
|
|
|

|
Add beef to the middle and bottom-end of your Tele or Esquire guitar bridge pickup sound with this single-coil pickup from DiMarzio. This 2-conductor pickup packs a classic Alnico V magnet and puts out 170mv of juice. The bright, steel guitar-like fundamentals of the original pickup are fattened up, while the mids and low-end are boosted to add punch and depth. You'll still cut through the band, but with a wider range of tone. more information »
|
|
|
|
|
|

|
It's not difficult to make a vintage single-coil pickup that's clean and bright, but not so easy if you also want the high strings to sound sweet above the 12th fret. The True Velvet was designed to make this happen by tuning the coil to a frequency range more information »
|
|
|
|
|
|

|
It looks and sounds just like a '59, warm and smooth with great sustain. more information »
|
|
|
|
|
|

|
Like the H3, the H3A uses two stud piece loaded coils for better noise rejection with over-wound coils and a ceramic magnet, but incorporates an Alnico 5 magnet for a warmer sound with a full top end. This pickup uses EMG's traditional solid cover cap in a unique HZ design. All HZ Pickups have EMG's exclusive 5-wire quik-connect output allowing any number of wiring combinations, and are fully shielded for a minimum of noise. String grounding is recommended to further decrease noise. more information »
|
|
|
|
|
|

|
With the TB-5, you get just the right balance of power, sustain, and distortion. This pickup cuts through with a distinctive high end and midrange attack. Recommended for bridge position. 4-conductor cable with traditional or Trembucker spacing. more information »
|
|
|
|
|
|

|
Less noise, more harmonics, more sustain. This Lace prewired pickguard includes Sensor Emerald, Sensor Reverse Wound Silver, and Sensor Purple pickups. more information »
|
|
|
|
|
|
|
|

|
Fat and warm, yet not muddy. It's hot, but not distorted. It's even got cool harmonics. The patent-applied-for magnetic structure reduces string-pull, so sustain is improved, and pick attack and dynamics are tremendously controllable and expressive. more information »
|
|
|
|
|
|

|
It looks and sounds just like a '59, warm and smooth with great sustain. more information »
|
|
|
|
|
|

|
BurstBucker Pro humbuckers are offered in a calibrated pair; the neck position (IM59A), and the bridge position (IM59B). Output of these pickups is similar to the standard BurstBuckerT #1 and #2 model. And BurstBucker Pro pickups are wax potted so that th more information »
|
|
|
|
|
|

|
It's not difficult to make a vintage single-coil pickup that's clean and bright, but not so easy if you also want the high strings to sound sweet above the 12th fret. The True Velvet was designed to make this happen by tuning the coil to a frequency range more information »
|
|
|
|
|
|
|
|
|
|