|
|
|
|
|
The EMG 60-X Active Humbucker Pickup packs plenty of output with a balance of tones that is classic-thick. Featuring close aperture coils loaded with ceramic magnets and powered by a newly designed preamp, this model's tonal characteristics provide full treble response for distinct single-note solos and buttery harmonic overtones that will add some serious meat to your playing. Traditionally used in the rhythm position for everything from clean bluesy tones to hard rocking crunchiness, give this replacement pickup a try and experience why the "X" factor is exciting players all around the world.The humbucker package includes: EMG's exclusive solderless Quik-Connect system; split shaft volume/active tone control set, output jack, battery clip set, screws, & springs. more information »
|
|
|
|
|
|
|
SKU: GS20457
Handmade neck pickup for a big deep tone with round top end and long sustain. Output comparable to a P-90 or Imperial Humbucker. Not just for jazz — also works well with moderate tube amp distortion. Low resistance coil wound with 38 gauge wire like original CC’s. Nickel plated blade pole piece, Alnico bar magnets. Made for solid bodies — may require routing and minor pickguard modification (instructions included).
Available in black, white, and tortoise. Custom matching pickguards available. more information »
|
|
|
|
|
|
|
Less noise, more harmonics, more sustain. The Sensor Gold - World Class Tone in a prewired pickguard. more information »
|
|
|
|
|
|
 |
SKU: GS2346740
BLACK - Strap lock plug designed for use specifically on acoustic instruments with endpin jacks installed. Keeps your strap from coming off the endpin jack button while you are playing "unplugged". You attach your strap and then plug in the "strap-jack" plug to hold the strap on. A very simple and effective solution to a perennial problem faced by many acoustic musicians. Plug is made of a non-conducting material so that it will not drain the battery powering your pickup. (Pickups For Acoustic Instruments) more information »
|
|
|
|
|
|
|
Precisely balanced coil configuration for rich harmonics and hot output with great sustain and smooth distortion. From sweet warm tones to raw rock 'n' roll, this pickup will revitalize your guitar. 4-conductor wiring for series, split, parallel, and "out of phase" wiring possibilities. more information »
|
|
|
|
|
|
|
SKU: GS1065956
This '75 EB-0 pickup will sound great in an old Gibson or in any other bass. These are the best bass pickups ever made in my humble opinion. more information »
|
|
|
|
|
|
|
|
|
|
|
Logo Color: Gold. Resonant Frequency (Khz): 3.20. RMS Output Voltage: 0.7. Peak Output Voltage: 1.0. Output Noise (dbV): -115. Output Impedance (Kohm): 5.0. Current @ 9V (microamps): 660. Battery Life (Hours): 400. more information »
|
|
|
|
|
|
|
Like the LB6, but with slightly wider string spacing for finger picking. more information »
|
|
|
|
|
|
|
SKU: GS1873132
1/4" jack mounted in a block that attaches to a violin like a standard chinrest. Installation instructions included. (Pickups For Acoustic Instruments) more information »
|
|
|
|
|
|
|
The Seymour Duncan SHPR-1 P-Rails is a full-size humbucker pickup that can be split to either a "real deal" P-90 or a traditional single-coil. Perfect for a wide variety of styles including country, pop, surf, jazz, blues, classic rock, and heavy rock.Description Until now, if you wanted humbucker, P-90, and vintage Strat tones, you'd have to haul three guitars to the gig. Enter P-Rails. It's a full-size humbucker that splits to either a full-size P-90 or a special Alnico-powered single-coil Rail pickup. The humbucker sound is full and expansive, owing to the mis-matched coil configuration. The P-90 is a super fat. And the Rail coils, when used together, sound like the 2 and 4 positions in a great Strat.Complete setup P-Rails are best used in a matched neck and bridge set. To get both humbucker and P-90 tones, use a two-way switch (push-pull or mini-toggle). To have humbucker and P-90 tones and bring in the added dimension of the single-coil Rail, use a three-way switch (DPDT on-off-on).Guitars Seymour Duncan P-Rails can be used in any guitar set up for a traditional humbucker or Trembucker. A single P-Rails will bring added dimension to your guitar. However, to optimize P-Rails' unique splitting capabilities and get the best single-coil Rails tones, use a neck and bridge set.Available mods Normally, in humbucking mode, P-Rails are wired in series, for a high-output sound that works great for classic rock and heavier tones. However, when wired in parallel, the coil mismatch produces a very usable Patent Applied For-style humbucker tone with less phase cancellation associated with standard parallel wired humbuckers, complete with present upper-mid "bloom" and pronounced string articulation.Players Peter Stroud / Sheryl Crow Band, Blues Saraceno, Eric Miker / Decemberadio more information »
|
|
|
|
|
|
|
Made out of chosen rosewood, which is often used for high-class bass guitars, the Stompin Bass works as a fantastic bass or bass drum accompaniment to your acoustic band. more information »
|
|
|
|
|
|