|
SKU: GS3132542
The Matchless SC30 has some of the best features Matchless has to offer. With two channels, and power, preamp and rectifier tubes, the sound delivered is unmatchable by other amps. Great for rock and blues, this amplifier offers great gain and incredible distortion. The effects loop helps to offer versatile tones and a huge sound. Matchless made, musician approved, the Matchless SC 30 was created for reliability and versatility.
Power: 30 Watts
Channels: Two Channels
Controls Ch.1: Volume, Bass, Treble
Controls Ch.2: Volume, Tone, Cut control, Bypassable Master Volume
Switches: Reverse Speaker Phase, Hi-lo power, 3 Position Rotary Impedance, 6 Position Rotary Tone
Power Tubes: 4 x EL84
Preamp Tubes: 1 x EF86, 3x12AX7
Rectifier Tube: 1x5AR4 (standard) or 2x5V4G tubes
Note on the Rectifier Tube: The one 5AR4 is used for sharper attack. Alternately, two 5V4G tubes may be used to roll off the attack and create more sag
Features: Dual inputs for each channel, Effects loop
Speaker Output: Switchable Impedance of 4, 8, and 16 Ohms
Weight: 71 lbs.
Dimensions: 21 x 21.5 x 10.5
Speaker: Celestion G12H30
For more information about the Matchless SC-30 guitar amp, please contact us at 314-781-7500. more information »
|
|
|
|
|
|
|
SKU: GS3092330
The Larrivee OM-05 is a one-of-a-kind orchestra mode acoustic guitar. It's constructed out of mahogany, with a single piece mahogany neck and a Canadian sitka spruce sound board and bracing. Not only are provided with the perfectly balanced tones of the OM-05, but they're more lively coming from a satin finish. Other appointments of the Larrivee OM-05 include Symmetrical Parabolic X-Bracing, hand fit dovetail neck joint, and chrome tuners with 18:1 ratio. Be sure to check this one out.
Other specifications include:
Solid wood construction
Single Piece mahogany neck
Canadian Sitka Spruce sound board and bracing
African Ebony fretboard and bridge
Canadian Maple multi-strip body binding
Mahogany back and sides
Symmetrical Parabolic X-Bracing
Hand fit dovetail neck joint
Abalone Rosette
Pearl logo w/sterling silver border
Chrome tuners w/18:1 ratio
Ivoroid fretboard binding
Larrivee custom beveled pickguard
Tusg nut, compensated Tusq saddle
Microdot fretboard markers
Lower Bout 15.375"
Upper Bout 11.75"
Waist 9.625"
Depth 4.25"
Scale 25.5"
Nut Width 1 3/4"
Fretboard Radius 17 to 21 compound
Light Gauge Strings
Nickel Silver frets
Fret Width 2.5 mm
Fret Height 1.0 mm
Limited Lifetime Warranty
For more information about the Larrivee OM-05, please contact us.
more information »
|
|
|
|
|
|
|
SKU: GS3127846
The Paul Reed Smith Custom 24 Artist Package is the core of the PRS family. Along with the Custom 22, the Custom 24 was one of the first, and remains one of the favorites in their guitar collection. This particular model, in Purple, is the epitome of the whole package. From its beautiful finish to its carved figured maple top and mahogany back wood, this guitar is quality from head-to-tail! Top it off with 57/08 pickups, a 24 fret tremolo, and PRS low mass locking tuners, and you'll never want to put this rig away! Whether you're rocking on stage, jamming in the studio, or rehearsing in your basement, the PRS Custom 24 in burnt almond is one you've got to check out!
Other specifications include:
Artist Package
Custom Color Burnt Almond
Carved Figured Maple
Back Wood Mahogany
Figured Maple Neck
Ebony Fret Board
Number of Frets 24
Scale Length 25"
24 Fret ? Pattern Thin Neck Carve
Inlay Birds
24 Fret ? Tremolo
Tuners PRS low mass locking tuners
Hybrid Hardware
24 Fret ? 57/08
24 Fret ? 57/08
Pickup Switching Volume and tone control with 5-way blade switch
For more information about the Paul Reed Smith Custom 24 Artist Package, please contact us. more information »
|
|
|
|
|
|
|
SKU: GS3129322
CONSTRUCTION: Standard; Mahogany Blocks/Dovetail Neck Joint
BODY SIZE: 00-12 Fret Venetian Cutaway
TOP:Engelmann Spruce Sand to .105"
TOP BINDING: 5/32'' Madagascar Rosewood
TOP INLAY: Fine Herringbone
ROSETTE: Fine Herringbone, D-18 Ring on each side of herringbonme
ADDITIONAL ROS. INLAY: Wood Fiber Inlays
BACK: Solid Highly Figured Koa
BACK PANELS: 2 Pc.
PURFLING: 1/32'' Maadagascar Rosewood Strip with B/M/B Inlays on each Side (Mitered)
BACK BINDING: 5/32'' Madagascar Rosewood
BACK INLAY: .042" Black/Maple/Black Fiber ( Mitered )
SIDES: Solid Highly Figured Koa
SIDE INLAY: .042" B/M/B Wood Fiber
ENDPIECE: Flamed Koa w-B/M/B inlay MITERED
ENDPIECE INLAY: .042" B/M/B Wood Fiber
NECK: Solid Flammed Spanish Cedar
NECK SHAPE: Low Profile
HEADSTOCK: Slotted / Square Slots / 6 String / Diamond / Square Corners
BACK/HEAD STAMP: C.F. Martin and Co. Nazareth, PA Stamp On Back Of Head
HEELCAP: Madagascar Rosewood w/ .042 B/M/B Fiber Inlays
NUT: Bone
ON ANGLE/FLAT: Flat
HEADPLATE: Figured Koa
HEADPLATE DECAL:None
HEADPLATE BIND: Madagascar Rosewood (Square Corners)
HEADPLATE INLAY: .027 B/M Fiber
HEADPLATE PEARL: Alternate Torch, Blue Paua
ADDITIONAL HP INLAY: None
TUNING MACHINES: Waverly W48 Brass (#3503) Side Mount W/Small Ebony Buttons Nickel
FINGERBOARD: Black Ebony
RADIUS: 16''
SCALE LENGTH: 24.840'' (24.9'')
WIDTH A more information »
|
|
|
|
|
|
|
SKU: GS3141305
The Carol-Ann OD3r is super versatile. It features a 33/18 watt amp with a separate EQ, so that you can get the exact tones you want. It delivers dynamic clean tones, and the drive channel varies from smooth to mudded. The third channel is a high-gain overdrive channel. The powerful head delivers huge tones, in an array of styles.
Other specs include:
Pre-Gain: This sets the overall input gain for the amp. This affects both channels.
CH A Bass, Middle & Treble: Clean Channel Tone Controls.
CH B & C Bass, Middle & Treble: OD Channels Tone Controls.
Gain B: Overdrive channel B gain control.
Gain C: Overdrive channel B gain control.
CH A Master: Master Volume for Clean Channel.
CH B Master: Master Volume for OD Channel.
CH C Master: Master Volume for OD Channel.
Lead Master: Footswitchable Lead Master Volume for OD Channels.
Presence: Global Presence Control.
Footswitch Socket: Heavy duty 5 pin XLR connector for footswitch.
Footswitch: Clean/OD, B/C and Lead Master with LEDs.
EFX Loop: A full tube buffered Serial Effects Loop is included as standard
For more information about the Carol Ann OD3r, please call us at 314-781-7500. more information »
|
|
|
|
|
|
|
SKU: GS3055518
Head, 18 watts. EL84s, black tolex with salt and pepper grill.
Here is what Dr.Z has to say about the Carmen Ghia!
?At first glance, the Carmen Ghia looks rather, well, modest. This is why this amp leaves so many people floored from the first note. Clean notes come out with a warmth, complexity, and sustain like one has never heard from such a small amp. Every note has a hugeness to it that seems far beyond an 18 watt head. All this comes before the amp really starts to sing. As you turn the Volume clockwise, the fun factor increases. The big clean notes get even BIGGER than they were before. Sustain becomes as smooth and musical as you have ever heard it. Notes seem to sing forever. This is an incredibly fun amp, and you?ll have trouble putting your guitar down. The Carmen Ghia interacts with the player because the player can feel the power tube distortion.
This amp is becoming a favorite in recording studios around the world. It?s also a great little amp for small clubs. While many other small amps have trouble cutting through the mix and have a rather flatulent low end, your Dr. Z Carmen Ghia will cut through the mix, always tightly and musically."
CALL FOR MORE INFO!
314-781-7500 more information »
|
|
|
|
|
|
|
SKU: GS3137250
Froggy Bottom guitars are known for their innovative designs that help to enhance the sound quality of their guitars. The Froggy Bottom Model P-12 Deluxe features a walnut back and side. Top it off with an Red Spruce top. The Model P12 is built with the quality craftsmanship that made Froggy Bottom popular among guitarists. This acoustic guitar will impress any guitarist that picks it up.
Other specifications of the Froggy Bottom Model P-12 Deluxe include:
Walnut Back and Sides
Adirondack Red Spruce
Gabon ebony fingerboard with 20 frets
24.75 in. scale length
1 3/4 in. water buffalo bone nut and saddle
Slotted peg head included
#3 pattern green abalone fingerboard position markers
Abalone rosette and backstripe included
Gold Waverly 4063G slotted tuners
Maple bindings and graft(s)
1" Pyramid Bridge
Natural finish
Maple heel cap
tortoise pick guard included
John Pearse light 80/20 .053-.012 included
Black American Vintage Series TKL case
For more information about this Froggy Bottom acoustic guitar, please contact us. more information »
|
|
|
|
|
|
|
SKU: GS3144064
The Paul Reed Smith 1980 West Street Brazilian Limited Edition electric guitar is one of the most stunning guitars produced from PRS. Designed to be a faithful replica of the guitars Paul Reed Smith was builiding in his West Street guitar shop in the 1980s. It's built with a Mahogany neck and body, offering complete comfort while playing. With a thinner layer of high-gloss finish to cover the natural color really adds a high-quality feel to the guitar. With PRS 1980 West St. humbucking pickups, and easily adjustable hardware, the sounds produced from the PRS 1980 West Street LTD will sound great no matter what you have it plugged to.
Other specifiations include:
Mahogany Back
Artist Grade Sapele Top
Deeper Top & Horn Carve
Small Pre-Factory Dragon Inlaid top of body in Green Ripple/Paua
Sanatana II Electronics
Mahogany Neck
Brazilian Rosewood Fretboard
"Santana II "Neck Profile"
24 frets
24.5" Scale
11.5" Radius
Green Heart Abalone Birds
Sapele Veneer
Small Original Green Heart Abalonr Eagle on Veneer
PRS Phase II Mini's w/Large Nickel Buttons
ME nut
Speed Knobs
Tremolo (non plated)
Un-plated Brass PRS Floating Tremolo
Pickups/Electronics:
PRS 1980 West St. Humbucking Pickup Neck
PRS 1980 West St. Humbucking Pickup Bridge
Santana II Controls and Switches - Three Way Pickup Selector
Master Volume and Master Tone Controls
BRW Truss Rod Cover w/Green Heart Abalone OM Symbol
Leather Covered Artist Package Hard Case Included
Exclusive To Eddie's Guitars
For more information about the PRS 1980 West Street brazilian limited edition electric guitar, please contact us. more information »
|
|
|
|
|
|
|
SKU: GS3140457
The Suhr Standard Pro Config 1 is a custom designed guitar built with an American Basswood body, flame maple top, and a maple neck with rosewood fret board. It's built with quality craftsmanship, to offer the best in reliability and stability. The Even-C, slim neck delivers excellent comfort and playability, so you won't want to put this guitar down. Finally, the JST ML single coil neck and middle pickups, in combination with the JST SSH humbucker pickups delivers versatile tones, great for playing any genre.
Other specs include:
Bengal Burst
Black back
Basswood body
3/16" Maple top
maple neck
Indian Rosewood fret board
Even-C, slim
.800-.880
10"-14" Radius
Tusq nut
Heavy SS frets
510, 2-post solid saddles (steel block) bridge
1.650 Nut width
Chrome hardware
Sperzel locking tuners
White Pearl WBW pickguard
JST ML single coil neck and middle pickups
JST SSH+ humbucker in the bridge position
Scrapped binding
20973
For more information about the Suhr Standard Pro Config 1, please call us at 314-781-7500. more information »
|
|
|
|
|
|
|
SKU: GS3041425
* Model:
* Albert Lee HH
* Size:
* 12-11/16" wide, 1-3/4" thick, 36-9/16" long (32.2 cm wide, 4.5 cm thick, 92.7 cm long)
* Weight:
* 6 lbs, 8 oz (2.95 kg) - varies slightly; 7 oz (0.2 kg) more with tremolo
* Body Wood:
* African Mahogany
* Body Finish:
* High gloss polyester
* Body Color:
* Tobacco Sunburst
* Bridge:
* Standard - Music Man vintage tremolo of chrome plated, hardened steel with bent steel saddles
* Pickguard:
* White Pearloid
* Scale Length:
* 25-1/2" (64.8 cm)
* Neck Radius:
* 10" (25.4 cm)
* Headstock Size:
* Only 5-7/8" (14.9 cm) long
* Frets:
* 22 - High profile, medium width
* Neck Width:
* 1-5/8" (41.3 mm) at nut, 2-1/4" (56.9 mm) at last fret
* Neck Wood:
* Select Rosewood neck
* Fingerboard:
* Select Rosewood
* Fret Markers:
* Oversized dots
* Neck Finish:
* Gunstock oil and hand-rubbed special wax blend
* Neck Colors:
* Standard Natural with finished headstock
* Tuning Machines:
* Schaller M6-IND locking
* Truss Rod:
* Adjustable - no component or string removal
* Neck Attachment:
* 5 bolts - perfect alignment with no shifting; Sculpted neck joint allows smooth access to higher frets
* Electronic Shielding:
* Graphite acrylic resin coated body cavity and aluminum lined pickguard
* Controls:
* 500kohm volume and tone - .047F tone capacitor
* Switching:
* 5-way lever pickup selector
* Pickups:
* HH - 2 DiMarzio custom humbucking with chrome covers
* Strings:
* 10p-13p-16p-26w-36w-46w (Custom RPS Slinkys)
CALL FOR MORE INFO!
314-781-7500 more information »
|
|
|
|
|
|
|
SKU: GS3144987
The Mini Plex MKII captures all of your favorite British high gain and classic rock tones with the help of our patented ?Decade Switch? technology. The Fargen ?Decade Switch? gives you 3 different classic sounds/gain structures and morphs between 3 completely different classic British preamp circuits ? the JTM45, Plexi JMP and JCM 800.
Specifications:
London Power / Power Scaling control 12 watts down to less than a 1/2 watt
Custom Mercury Magnetics transformers w/ 4-8-16 ohm taps
SoZo vintage style mustard capacitors
Dual power tube sockets for use with any octal power tube(no re-bias)
Use EL34/KT66 /KT77/6550/6L6/5881/6V6 ECT
The ability to mix and match any of the above tubes?(i.e.El34 + KT66)
DC Filaments for ultra quiet operation
1/8″ aluminum chassis for the true vintage British amp sound
New improved 3 position rotary decade switch that alters the circuit for true 60-70-80 Marshall Style tones. (JTM 45 / Plexi / JCM 800)
Passive FX Loop
Dimensions: 25″W x 11″H x 10″D
Weight: 25 lbs.
Output Power: 8-12 watts
Tube Complement: (2) 12AX7, (2) EL34
Will also run KT66,KT77,6550,6L6,6V6,5881
Class ? Parallel single-ended class A
Front Panel Layout & Equalization ? Decade, Volume, Master, Treble, Bass, Mid, Power Scaling
For more information on this Fargen Mini Plex MK II - Head, call us 314-781-7500 more information »
|
|
|
|
|
|
|
SKU: GS3134529
The Paul Reed Smith 513 maple top is one of the most stunning guitars featured in our shop. Carefully constructed out of mahogany, this 513 holds true to the great reputation of quality construction and beauty for which PRS is known. Additionally, the 513 pickup configuration provides a 5 way switch which provides a choice among bridge, bridge+middle, middle, middle+neck, and neck, while the discrete 3 way switch allows you to switch among series, parallel, and single coil operation. The 513 pickups give you 13 pickup options, providing a sound unrivaled by other guitars. It's truly a one-of-a-kind.
Other specifications include:
Black Gold Burst
Mahogany body
Carved Quilted Maple top Ten Top
25-1/4" Scale length
Neck Wood Mahogany
Fretboard Wood Rosewood
Neck Shape Pattern Regular
bird inlays
Bridge Tremolo
PRS Phase III low mass locking tuners
Hardware Type Nickel
513 Pickup
197883
For more information about the PRS 513 in Santana Black Gold Burst, please contact us at 314-781-7500. more information »
|
|
|
|
|
|
|
SKU: GS2214723
Model: Paul Reed Smith Custom Special 22
Mateo Mist
Carved Figure Ten Top Maple Top
Mahogany Back
25" Scale
PRS Tremolo
PRS Low Mass Locking Tuners
Bladeswitch
Wide Fat Neck Carve
Birds Inlays
Nickel Hardware
Swamp Ash Humbucking Pickups
Lindy Fralin Middle Pickup
CALL FOR MORE INFO!
314-781-7500 more information »
|
|
|
|
|
|
|
SKU: GS3123583
At the dawn of the 1960s, the stratocaster stood poised for a wild new decade full of exciting and innovative new music. Music history beckoned as never before-sounds would be wrung from the previous decade couldn't possibly have dreamed of.
The custom shop honors that turn-of-the-decade instrument with the 1960 relic straocaster with matching headstock. Features include an alder body, maple neck with matching headstock, roserwood fingerboard with 9.5" radius and 6105 frets, 1960 stratocaster pickups with 5-way switching, three ply mint green pickguard, and vintage hardware.
Other specifications include:
2012 Custom Collection
Olympic White
Body: hand selected premium alder
Finish: nitro lacquer
Neck: maple with large "C" back shape and matching headstock
Fretboard: rosewood (9.5" radius)
Frets: 6105
Hardware: vintage
Bridge: vintage synchronized tremolo
Pickups: vintgae 60s strat
Wiring: vintage strat
Controls: volume/tone/tone, 5-way switching
Included: case, certificate
R68356
For more information on the Fender 1960 Relic Stratocaster Matching Headstock , please call 314-781-7500. more information »
|
|
|
|
|
|
|
SKU: GS3078081
Natural
East Indian rosewood back and sides
German spruce top
grained ivoroid binding
prewar scalloped bracing
crosscut grained ivoroid
black/white nitrate strip purfling
herringbone border
crosscut grained ivoroid
wood strip rosette
tortoise style pickguard
Other features include
gloss-finished mahogany neck
ebony fingerboard and bridge
rosewood peghead overlay
mother of pearl Collings logo
traditional diamond and square inlay
nickel Waverly tuners.
Nut Width: 1 3/4?
Scale Length: 25 1/2?
Body Width: 15?
Body Length: 19 1/4?
Body Depth: 4 3/4? (Deep Body)
Total Length: 39 1/2?
Vintage Neck and Bridge
2 3/8" String spacing @ saddle
CALL FOR MORE INFO!
314-781-7500 more information »
|
|
|
|
|
|