|
SKU: GS15534
These RS/PAFs are made for RS by Lindy Fralin, and are exact copies of the real 1960 PAFs found in Roy’s main Les Paul®. There tone is very smooth with a great single coil sting for that P-90 cut through. They do a great job of getting that old Dickey Betts and early Jimmy Page tone. The neck pickup reads 7.4K and the bridge is 8.1K both have unbalanced coils and are unspotted with Alnico IV magnets. These pickups are used by Greg Martin of the Kentucky Headhunters (listen to his clips on our look who’s using RS page). They are a special order so delivery may take up to a month, so if you are ordering them with other items, be aware that the full order will ship only when the pickups are ready to ship with no exceptions. Black more information »
|
|
|
|
|
|
|
|
SKU: GS15463
New Gold Lightweight tailpiece. Fits Gibson Les Pauls® and many others.
more information »
|
|
|
|
|
|
SKU: GS15675
These are a set of new Chrome TonePros® locking studs. The locking studs enhance tone and sustain as well as prevent the tailpiece from falling off onto your guitar top when changing strings! more information »
|
|
|
|
|
|
SKU: GS15601
An exact replica of the Rythm/Treble rings used by Gibson® in the 1950's, our RS Rythm/Treble switch ring is silk screened using the correct font (see attached picture.) This part works great for people who have a Custom, Special or SG and demand a correct part. New more information »
|
|
|
|
|
|
SKU: GS15505
Premium CTS 500k audio-taper potentiometer, SHORT shaft. While not metered, these pots come with extremely tight tolerances (+/- 10%). These pots feature brass shafts and mil-spec construction.
more information »
|
|
|
|
|
|
SKU: GS15649
Grovers newest 18:1 Rotomatic 3X3 tuners in aged Nickel finish ready for your aged or vintage Gibson guitar. more information »
|
|
|
|
|
|
SKU: GS15666
These are a set of aged Gold TonePros® locking studs. The locking studs enhance tone and sustain as well as prevent the tailpiece from falling off onto your guitar top when changing strings! more information »
|
|
|
|
|
|
SKU: GS15530
Lindy Fralin P-90 Pickup set. Wound with a vintage neck and an overwound bridge, we feel these are the best and fullest sounding P-90 being made. Cream. more information »
|
|
|
|
|
|
SKU: GS15502
Alinco IV magnet that is correctly sized for Gibson® pickups.
more information »
|
|
|
|
|
|
SKU: GS15589
A subtle amber hue and a nice patina make this set of 4 barrel knobs a unique and much sought-after part. more information »
|
|
|
|
|
|
SKU: GS15476
For years, guitar manufacturers have chosen to cut corners on the electronics they have used, even in their top-of-the-line guitars. This kit is designed to utilize the best electronic components possible in your guitar. This kit is the culmination of thousands of hours of research and development into different guitar electronics and how each of them affects the overall tone of the guitar. It comes wired onto a template; all you have to do is drop the kit into your guitar and wire the pickups, jack, and switch. more information »
|
|
|
|
|
|
SKU: GS15541
RS Guitarworks Exclusive. By Jim Wagner of WCR pickups. Bridge position pickup made to RS Guitarworks specification by Jim Wagner of WCR pickups. The shredder is a High output unbalanced bucker that has the sound of the best JB you never heard. It's everything you always wanted from the JB with out the nasty upper mid spike. The Shredder is a four conductor pickup that also sounds great as a single coil. The pickup does it all from PAF to High gain monster all with the use of your guitars volume knob. The Shredder is a 16.2K humbucker using an alnico V magnet to give you the dynamic, and bloom only a great hand wound Alnico pickup can. They are a special order but delivery is only a week in most cases, so if you are ordering them with other items, be aware that the full order will ship only when the pickups are ready to ship with no exceptions. Black more information »
|
|
| | |