|
SKU: GS15667
Aged, solid nickel pickup covers. No copper plating here! Price is for a set of 2 covers. more information »
|
|
|
|
|
|
SKU: GS15462
New chrome TonePros® Nashville type bridge for Gibson Les Pauls® and others. This bridge looks just like the factory Gibson® bridge on most post-70's Les Pauls® and other Gibson® type guitars. But the TonePros® adds tone and sustain by locking the bridge to the studs!
more information »
|
|
|
|
|
|
SKU: GS15655
This is our aged version of the single ring Kluson key used on all the 50's Les Pauls. They look amazing on any new or real Paul. more information »
|
|
|
|
|
|
SKU: GS15512
The new RS Guitarworks "Super-Pot" has been in the works for several long months. These pots are manufactured by CTS specifically for RS Guitarworks. We designed the potentiometers to our specs, which exceed those of the CTS pots that are and have been the industry standard for over 40 years with Gibson®, Fender® etc. The RS Guitarworks "Super-Pot" is made with tolerances that are twice as tight as the normal CTS 500k pots used in even the most expensive Les Pauls® etc. We also had the cheap aluminum shaft replaced with brass for more durability. We chose CTS’s old-school heavy carbon resistance path instead of the inferior silk-screening currently used by many other makers. And perhaps most important, we custom designed the taper specifically for the volume position of electric guitar. Our custom taper gives smooth even response throughout the range of motion. You will not experience any steep drop-offs or uneven taper. Together these features represent what is without doubt the ultimate potentiometer for electric guitar applications. These RS Super-Pots are available in both short and long shaft to cover most any guitar application where a 500k pot is suitable.
***NOTE***
These potentiometers are designed specifically for volume controls. They are not suggested for use as tone controls. You can find tone potentiometers under CTS 500K Audio Taper Potentiometers
more information »
|
|
|
|
|
|
SKU: GS15546
RS Guitarworks Exclusive. By Jim Wagner of WCR pickups. This is a zebra version of the bridge position pickup made to RS Guitarworks specification by Jim Wagner of WCR pickups. The shredder is a High output unbalanced bucker that has the sound of the best JB you never heard. It's everything you always wanted from the JB with out the nasty upper mid spike. The Shredder is a four conductor pickup that also sounds great as a single coil. The pickup does it all from PAF to High gain monster all with the use of your guitars volume knob. The Shredder is a 16.2K humbucker using an alnico V magnet to give you the dynamic, and bloom only a great hand wound Alnico pickup can. They are a special order but delivery is only a week in most cases, so if you are ordering them with other items, be aware that the full order will ship only when the pickups are ready to ship with no exceptions. more information »
|
|
|
|
|
|
SKU: GS15594
As a set of 4, these knobs are meticulously aged. We create the correct ambered coloration on the knobs and even add the greening to the bottom of the knobs. Looks great on vintage and modern guitars alike. more information »
|
|
|
|
|
|
|
|
SKU: GS15595
Set of 4 gold speed knobs, slightly dulled, aged, and ambered. more information »
|
|
|
|
|
|
SKU: GS15513
The new RS Guitarworks "Super-Pot" has been in the works for several long months. These pots are manufactured by CTS specifically for RS Guitarworks. We designed the potentiometers to our specs, which exceed those of the CTS pots that are and have been the industry standard for over 40 years with Gibson®, Fender® etc. The RS Guitarworks "Super-Pot" is made with tolerances that are twice as tight as the normal CTS 500k pots used in even the most expensive Les Pauls etc. We also had the cheap aluminum shaft replaced with brass for more durability. We chose CTS’s old-school heavy carbon resistance path instead of the inferior silk-screening currently used by many other makers. And perhaps most important, we custom designed the taper specifically for the volume position of electric guitar. Our custom taper gives smooth even response throughout the range of motion. You will not experience any steep drop-offs or uneven taper. Together these features represent what is without doubt the ultimate potentiometer for electric guitar applications. These RS Super-Pots are available in both short and long shaft to cover most any guitar application where a 500k pot is suitable.
***NOTE***
These potentiometers are designed specifically for volume controls. They are not suggested for use as tone controls. You can find tone potentiometers under CTS 500K Audio Taper Potentiometers more information »
|
|
|
|
|
|
SKU: GS15486
For years, guitar manufacturers have chosen to cut corners on the electronics they have used, even in their top-of-the-line guitars. This kit is designed to utilize the best electronic components possible in your guitar. This kit is the culmination of thousands of hours of research and development into different guitar electronics and how each of them affects the overall tone of the guitar. more information »
|
|
|
|
|
|
SKU: GS15658
This is the most exact repro of the 1954-55 Fender Trem arm ever made. It is exact down to every detail, and is made here in the US of the finest cold rolled steel. Aged. more information »
|
|
|
|
|
|
SKU: GS15652
Kluson aged tuners for Les Paul JR type guitars. 3-per side kidney-button type tuners. New tuners with aged finish. more information »
|
|
|
|
|
|
SKU: GS15511
RS Paper and Oil GuitarCap by Jensen .022. Some of our customers have asked us for a good vintage cap option for some time, so we went to Jensen and asked them to make a paper and oil capacitor as small as possible for that "woody" tone and they nailed it! This is the cap of choice for Greg Martin and is used in our new Hillbilly Channel Switchin' Kit They are a must have that classic fat old school tone of the 60's and 70's.
more information »
|
|
|
| | |