|
|
|
SKU: GS15537
These RS/PAFs are made for RS by Lindy Fralin, and are exact copies of the real 1960 PAFs found in Roy’s main Les Paul®. There tone is very smooth with a great single coil sting for that P-90 cut through. They do a great job of getting that old Dickey Betts and early Jimmy Page tone. The neck pickup reads 7.4K and the bridge is 8.1K both have unbalanced coils and are unspotted with Alnico IV magnets. These pickups are used by Greg Martin of the Kentucky Headhunters (listen to his clips on our look who’s using RS page). They are a special order so delivery may take up to a month, so if you are ordering them with other items, be aware that the full order will ship only when the pickups are ready to ship with no exceptions. Zebra more information »
|
|
|
|
|
|
SKU: GS15494
For years, guitar manufacturers have chosen to cut corners on the electronics they have used, even in their top-of-the-line guitars. This kit is designed to utilize the best electronic components possible in your guitar. This kit is the culmination of thousands of hours of research and development into different guitar electronics and how each of them affects the overall tone of the guitar. more information »
|
|
|
|
|
|
SKU: GS15600
This 4-Ply (black/white/black/white,) pickguard is another RS exclusive part. Designed for owners of Goldtops and '57 Custom® reissues who want to upgrade their existing plastic, this pickguard is made to vintage-correct specifications. New. more information »
|
|
|
|
|
|
SKU: GS15659
This is the most exact repro of the 1956-62 Fender Long Trem arm ever made. It is exact down to every detail, and is made here in the US of the finest cold rolled steel. Aged. more information »
|
|
|
|
|
|
SKU: GS15652
Kluson aged tuners for Les Paul JR type guitars. 3-per side kidney-button type tuners. New tuners with aged finish. more information »
|
|
|
|
|
|
SKU: GS15542
Well it's official there is now a Shredder neck pickup. It's an unbalanced pickup that gives you the singing tone of the Darkburst with the detail, and drive of the Fillmore neck, all in a 9.2K pickup. I can't say just how great this pickup sounds. It really has the tone of the Crossroads neck with much more power, but some how Jim never lost the hollow mids, and dynamics of a great low powered PAF. They are a special order but delivery is only a week in most cases, so if you are ordering them with other items, be aware that the full order will ship only when the pickups are ready to ship with no exceptions. more information »
|
|
|
|
|
|
SKU: GS15663
Aged Nickel Gibson® type control knob pointers. Priced as a set of four. more information »
|
|
|
|
|
|
SKU: GS15601
An exact replica of the Rythm/Treble rings used by Gibson® in the 1950's, our RS Rythm/Treble switch ring is silk screened using the correct font (see attached picture.) This part works great for people who have a Custom, Special or SG and demand a correct part. New more information »
|
|
|
|
|
|
SKU: GS15521
These RS/PAFs are made for RS by Lindy Fralin, and are exact copies of the real 1960 PAFs found in Roy’s main Les Paul®. There tone is very smooth with a great single coil sting for that P-90 cut through. They do a great job of getting that old Dickey Betts and early Jimmy Page tone. The neck pickup reads 7.4K and the bridge is 8.1K both have unbalanced coils and are unspotted with Alnico IV magnets. These pickups are used by Greg Martin of the Kentucky Headhunters (listen to his clips on our look who’s using RS page). They are a special order so delivery may take up to a month, so if you are ordering them with other items, be aware that the full order will ship only when the pickups are ready to ship with no exceptions more information »
|
|
|
|
|
|
SKU: GS15677
These are a set of new Gold TonePros® locking studs. The locking studs enhance tone and sustain as well as prevent the tailpiece from falling off onto your guitar top when changing strings! more information »
|
|
|
|
|
|
SKU: GS15515
Switchcraft long toggle switch for Les Paul® guitars, and many other models. This is a quality replacement switch. Also available in short, and 90-degree type switches.
more information »
|
|
|
|
|
|
|