 |
SKU: GS16991
Victoria Double Deluxe point-to-point, hand-wired all tube amplifier! Based on the late-1950's Fender 5E3 Deluxe. The 5E3 Deluxe is one of the most dynamic, best sounding and all time favorite Fender amps of the 1950's! But, at only about 15 to 18-watts and with a single 12" speaker, it can be limited on stage or at bigger clubs. Thanks to Victoria, players can now get the 5E3 Deluxe sound AND a more powerful amp! The Double Deluxe is two Deluxes in one cabinet and offers up more of everything ... four 6V6 output tubes (instead of two) and two 12" AlNiCo speakers (instead of one). So, it has no problem keeping up with the rest of the band!
And, since the Double Deluxe is cathode biased, you may choose to run a 5Y3 rectifier tube for about 30-watts output or a 5AR4 rectifier tube for about 40-watts output.
This amp just nails the classic 5E3 Deluxe tone, but has more of it and it is just plain fun to play!
Classic tweed tone and new amp reliability ... what more do you need! more information »
|
|
|
|
|
|
SKU: GS16992
Victoria 35210 hand-wired all tube amplifier! Based on the 1950's Fender narrow panel 5F4 Super amp, this amp holds true to the original circuit with the addition of a bias adjustment potentiometer and test points! This is one of my personal favorite Victoria amps, offering up an amazing pallet of tones from exceptional cleans to smooth and aggressive overdrive. And, with two 10" Jensen speakers and 35-watts, it is big enough to gig with!
After more than 40-years, the Fender narrow panel Super still continues to amaze players with its simple, pure tweed era tone and serves as a workhorse amp for practice, in the studio or clubs.
Classic tweed tone and new amp reliability ... what more do you need! more information »
|
|
|
|
|
|
SKU: GS17001
Tone Tubby Ceramic 10" 8 or 16-ohm 40-watts speaker, with the standard H1E Hempcone! The 10" Ceramic Tone Tubby speakers are hot off the production line! With the exact same voice coil and similar magnet as its big brother, the Ceramic 12", this is a BIG sounding speaker in a small 10" package! The Tone Tubby Ceramic 10 offers an amazing range of tone, throughout the entire guitar frequency range. More overall lows, mids and highs, with NO "cone cry" or "ice pick highs". Classic ceramic magnet speaker clarity and definition, with later, smooth breakup, more clean headroom, and slightly more bright frequencies than its AlNiCo 10 counterpart. This amazing speaker provides a smooth and warm tone, with fat, silky and thick overdrive without any harsh high end. Compared to several other 10" speakers, I've tested it against, it has a tighter bottom end, bigger mid-range and sweeter, smoother top end. Ideal for both closed back or open back cabinets. Tone Tubby is the first "new" line of speakers, that we have tested in many years, that has just plain "knocked us out"!
Available in 8-ohm and 16-ohm impedance. more information »
|
|
|
|
|
|
SKU: GS17004
Custom hand-built "craftsman quality" cabinet. These cabinets are built one at a time, by a northern California cabinet builder, who has 14+ years OEM experience providing cabinets to many well known amplifier and speaker manufacturers. Using premium C/D-select pine, true machined finger-joints and the best materials available, these cabinets just ooze a warm, airy and woody tone. These are not cheap, production line cabinets!
Cabinet
Premium C/D-Select Pine cabinet & Baltic Birch ply baffle
"Finger-Jointed" construction, just like the original Fender cabinets
Inside cabinet is stained to give it a vintage look
Fender reproduction handle and chrome metal corner protectors & feet included
(W) 24" x (H) 17" x (D) 10-3/4""
Premium vintage style cloth covered 18-gauge hook-up wire
Purchase any two (2) speakers with this cabinet and we will install them, wire them up and test the cabinet at NO extra charge
Offered in the following colors:
Black Tolex / Black-White-Silver Grill Cloth
Black Tolex / Wheat Grill Cloth (shown in pictures)
Blonde Tolex / Wheat Grill Cloth
Ask us about our 3-Jack "Fail-Safe" wiring configuration! more information »
|
|
|
|
|
|
SKU: GS16997
The THD Flexi-50 is an American made, Class-AB, 50-watt/20-watt switchable power tube amplifier, with foot-switchable overdrive/boost and master volume control, and built-in external bias test points and bias controls.
The Flexi-50 is designed to allow you the ability to easily switch the two (2) octal type output tubes at will, for an amazing breadth of different tones. Usable tubes include 6L6, EL34, 6V6, 6CA7, 8417, 6550, KT66, KT77, KT88, KT90, KT100, 6K6 and 6F6. EL84 output tubes may also be used with the purchase of THD YJS or YJ20 Yellow Jacket adaptors. An external bias test points and individual bias controls allows the user to quickly and accurately set the output tube bias with any digital voltmeter. The dual bias controls permit the user to correctly bias even mis-matched tubes, eliminating the need for matched power tubes.
The three preamp tubes may also be easily switched with any combination of 12AX7, 12AT7, 12AU7, 12AY7, 12AZ7, 12DW7, 12BH7, ECC83, ECC82 or ECC81 dual triode preamp tubes, for an even greater pallet of complex tone capabilities.
From fat, clear, full clean tones reminiscent of late-1950's to early 1960's American combo amps, overdrive to rival the best British heads, and immediacy, clarity and "punch" of a grid-based Class-AB amplifier ... this little amp does it all! more information »
|
|
|
|
|
|
SKU: GS16999
Tone Tubby Ceramic 12 8 or 16-ohm 40-watts speaker, with the standard H1E Hempcone! Called "The most significant development in speaker design for decades", by David Wilson at ToneQuest Magazine. The Tone Tubby Ceramic 12 offers an amazing range of tone, in the guitar frequency range. More overall lows, mids and highs, with NO "cone cry" or "ice pick highs". Classic ceramic magnet speaker clarity and definition, with later breakup, more clean headroom, and slightly more bright frequencies than its AlNiCo 12 counterpart. This amazing speaker provides a smooth and warm tone, with fat, silky and thick overdrive without any harsh high end. Compared to a couple of other 12" speakers, in the shop, it has a tighter bottom end and sweeter, smoother top end. Ideal for both closed back or open back cabinets. This is the first "new" line of speakers, that we have tested in many years, that has just plain "knocked us out"!
Available in 8-ohm and 16-ohm impedance. more information »
|
|
|
|
|
|
SKU: GS17005
Can't decide between the tight, more focused sound of a 10" speaker or the bigger, more airy sound of a 12" speaker? Well, now you don't have to ... you can have both in the same cabinet! SVVA's new Custom 1x10"+1x12" premium Pine cabinet offers the best of both worlds, one 10" and one 12"! And, when combined with our 3-Jack wiring configuration, you won't find a more flexible and versatile cabinet anywhere!
Custom hand-built "craftsman quality" cabinet. These cabinets are built one at a time, by a northern California cabinet builder, who has 14 + years OEM experience providing cabinets to many well known amplifier and speaker manufacturers. Using premium C/D-select pine, true machined finger-joints and the best materials available, these cabinets just ooze a warm, airy and woody tone. These are not cheap, production line cabinets!
Cabinet
Premium C/D-Select Pine cabinet & Baltic Birch ply baffle
"Finger-Jointed" construction, just like the original Fender cabinets
Inside cabinet is stained to give it a vintage look
Fender reproduction handle and chrome metal corner protectors & feet included
(W) 24" x (H) 21" x (D) 11"
Premium vintage style cloth covered 18-gauge hook-up wire
Purchase any two (2) speakers with this cabinet and we will install them, wire them up and test the cabinet at NO extra charge!
Offered in the following colors:
Black Tolex / Black-White-Silver Grill Cloth
Blonde Tolex / Wheat Grill Cloth (shown in pictures)
Ask us about our 3-Jack "Fail-Safe" wiring configuration! more information »
|
|
|
|
|
|
SKU: GS637900
Headstrong Royal Reverb Tube Amplifier ('64 Deluxe Reverb)
Headstrong Royal Reverb hand-wired all tube amplifier! Based on the 1964 Fender Deluxe Reverb amp and an exact replica of the famed AB763 circuit, this is one of the best recording and small to medium sized gig amps of all time! You just can't get the warmth, color and texture of this amp's tone out of a modern PC-Board amp!
After more than 40-years, the Blackface era Fender Deluxe Reverb still continues to amaze players with its classic 1960's "Blackface" tone, onboard tremolo and lush tube driven reverb, and serves as a workhorse amp for practice, in the studio or small to medium sized clubs!
Classic Blackface Fender tone and new amp reliability ... what more do you need! more information »
|
|
|
|
|
|
SKU: GS17002
The Tone Tubby Super Boy Bass 10 8 or 16-ohm Hempcone 250-watts speaker is Tone Tubby's first entry into the bass speaker market and they hit a home run their first time at bat! The hempcone is just perfect for a bass speaker. The low end punch, warmth and clarity surpasses any other bass speaker I've tried. If you are looking for a bigger, richer sounding 10" bass speaker that is built to last ... this is it!
Available in 8-ohm and 16-ohm impedance. more information »
|
|
|
|
|
|
SKU: GS16993
Victoria 518 hand-wired all tube amplifier! Based on the 1950's Fender 5F1 Champ, this small 5-watt all tube amplifier just oozes a warm, sweet 1950's Fender sound!
After more than 40-years, the Fender 5F1 Champ still continues to amaze players with its simple, pure Class A tone and serves as a workhorse amp for practice, in the studio or small clubs.
Classic tweed tone and new amp reliability ... what more do you need! more information »
|
|
|
|
|
|
SKU: GS16995
The THD UniValve was the 2001 amplifier of the year at Guitarist Magazine, which they said "... is destined to go down in amp history as one of the world's ultimate studio amplifiers."
The THD UniValve is an American made, Class-A single-ended, 15-watt, tube amplifier, with a built-in THD Hot Plate power attenuator, Line Out and selectable output impedance selector.
The UniValve is designed with a self-biasing circuit that allows you to easily switch the octal type output tube at will, for an amazing breadth of different tones, without re-biasing the amp. Usable tubes include EL34, 6L6, 6550, 7027, KT90, KT88, KT77 and KT66, for a nominal output of 12 to 15-watts RMS. With the amp set to the "LoV" setting you can also use a 6V6 for a total output of 5-watts. An EL84 output tube may also be used with the purchase of the THD YJUni Yellow Jacket adaptor.
The two preamp tubes may also be easily switched with any combination of 12AX7, 12AT7, 12AU7, 12AY7 and 12AZ7 dual triode preamp tubes, for an even greater pallet of complex tone capabilities.
From smooth, clear and clean country type tones to very aggressive, over-driven Marshall type tones ... this little amp does it all! more information »
|
|
|
|
|
|
SKU: GS637901
Headstrong Verbrovibe Tube Amplifier ('63 Fender Vibroverb)
Headstrong Verbrovibe hand-wired all tube amplifier! To my knowledge, this is the world's first replica of a 1963 Fender "Brown" era Vibroverb, true to the original design with the addition of a bias potentiometer. No expense has been spared to recreate this masterpiece amplifier; Heyboer transformers, custom built Weber ceramic speakers voiced to closely match the original Oxford's, tube driven spring reverb, bias vary tremolo, solid steel chassis, and tapped treble control as found on all Brown era Fender amps!
After more than 40-years, the original Brown Vibroverb still continues to amaze players with its classic 1960's Fender tone, "Brown" era tremolo, lush tube driven reverb, and serves as a workhorse amp for practice, in the studio or small to medium sized clubs! more information »
|
|
| | |