 |
SKU: GS1813927
A studio-quality chorus/flanger/modulation pedal for bassists!
Analog chorus/flanger/modulation bass effect
low-noise, studio-quality sound
Chorus, flange, and pitch modulation modes
Depth and Rate controls
Stereo output
Preserves entire frequency range of signal
Noiseless switching
Rugged construction
EBS UniChorus Analog Signal Processing Pedal
The EBS UniChorus is a bass effect pedal that lets you switch between low-noise, studio-quality chorus, flanger, and pitch modulation effects. Premium analog circuitry gives the UniChorus a smoother, warmer, and fatter chorus/flanger effect perfect for bass. It has Depth and Rate controls plus stereo output.
EBS bass effect pedals are designed to preserve the entire frequency range of your bass signal, use noiseless FET switching, are suitable both for studio and live use, feature robust construction, and are easy to use.
Nominal input level: -8
Input Impedance: 200 kohms
Dry Bandwidth (+0/-2dB): 20-20kHz
Delay Bandwidth (+0/-3dB): 150-8kHz
Delay Level Mix (min/max): -oo-+3 dB
Center Delay Time (Flange/Chorus/P.M.): 3ms/5.5ms/10ms
Modulation Depth (min/max): +/-50% of nom. Delay Time
LFO Range (min/max): 0.15-7.5Hz
2.8"W x 4.5"H x 1.4"D
1 lbs.
Power requirements: 9V DC regulated, 15mA more information »
|
|
|
|
|
|
|
SKU: GS1695173
Now in stock! This preamp/direct box is so strong and powerful it could only be called the "Tone Hammer"! Based on the respected OBP-3 preamp, the Tone Hammer features fully sweepable midrange frequencies in addition to bass and treble controls. With the Tone Hammer's pristine D.I. you are set for the studio or the stage.
To give this tone shaping unit the ultimate flexibility we are introducing our proprietary Adaptive Gain Shaping circuitry (AGS). AGS allows the player to kick in an additional gain structure and EQ with the "stomp" of a button. You can now go from modern slap sounds to vintage or overdriven.
18 volt operation gives the Tone Hammer plenty of headroom to reproduce the most dynamic playing style. Separate "Gain" and "Master" controls allow you to dial in just the right gain structure for any instrument.
The Tone Hammer is the essential preamp/direct box for every bassist's tool box.
Features:
Pre/Post DI
Unbalanced output can drive a power amp
AGS circuitry
Cut and boost of treble, mid and bass frequencies
Fully sweepable midrange frequencies
Powered by two nine volt batteries, phantom power or optional universal power supply
Ground lift switch
Heavy Duty steel construction
Specs:
Inputs: One 1/4" jack
Outputs: One 1/4" jack, One XLR (nominal output - 14 dBu balanced)
EQ:
Bass +/- 18 dB @ 40 Hz
Mid +/- 17 dB @ 180 Hz to 1 kHz
Treble +/- 18 dB @ 4 kHz
Controls:
Ground lift switch
Pre/Post DI switch
Engage switch
AGS switch
Warranty: Three year limited
Optional: 18 volt power supply available @ $30
FREE SHIPPING! more information »
|
|
|
|
|
|
|
SKU: GS3077575
Modulus Quantum 4 in Black Cherry finish with 5A Quilt Maple top. Hi gloss finish, Alder body, hipshot bridge, jumbo frets, black hardware, Aguilar OBP-3 preamp, EMG 35CS pickups. Hardshell case included. $4400 list Free Shipping Call (773) 561-3521 more information »
|
|
|
|
|
|
|
SKU: GS1813924
Lakland Custom Wound Stainless Strings 5 set Medium Guage
.45 .65 .85 .105 .128.
These strings are Authentic Lakland brand strings as installed on their production basses. They are sized to be strung either through the body, or through the bridge, which means they will seat themselves perfectly on the bridge and nut.
$5 shipping is for 1 item. Purchase more than one pack of strings for FREE FREIGHT! I will send you an adjusted invoice prior to payment.
more information »
|
|
|
|
|
|
|
SKU: GS3044220
Fodera NYC Deluxe 4 string with Flame Maple top, Ash body, 1 piece hard rock maple neck, rosewood fretboard, urethane satin finish, black hardware, Fodera JJ pickups, Fodera NYC 2 band preamp, 34" scale, and 21 frets. Includes Fodera Hardshell case. Free Freight! Call (773) 561-3521 more information »
|
|
|
|
|
|
|
SKU: GS3043222
NS NxT4 Electric Upright Double Bass - Amberburst Satin
These new instruments, crafted in the Czech Republic by the makers of the renowned CR Series, exemplify flawless workmanship at an incredible value.
LENGTH: 132 cm (52")
WEIGHT: exact weight not specified yet
SCALE LENGTH: 106 cm (41.73")
STRINGS: 4
CONSTRUCTION: Solid maple
COLORS: Amberburst Satin
FINGERBOARD: Ebony; 43.1mm (1.7") wide at nut; 89.0mm (3.5") max. width*
BRIDGE: Rock maple (dyed black); radius 7.9cm (3.1") string spacing 80 mm (3.14")
NUT: Ebony; radius 7.9cm (3.1"); string spacing 31mm (1.22")
POLAR PICKUP SYSTEM: The directional piezo pick-up system responds selectively to either vertical vibration (for the sustained plucked sound, like an electric bass guitar), or lateral vibration (for dynamic bowing, and a percussive plucked sound)
ELECTRONICS: passive volume and tone control
TRUSS ROD: Powerful rod design provides positive relief adjustment, accessible at nut. See text above outlining range, it cannot completely flatten the board.
TUNING MACHINES: Fully encased worm gear tuners; black finish
STRINGS: Light tension flatwound steel strings are standard. Accommodates all NS length strings and most long scale acoustic double bass strings.
TRIPOD STAND: (standard) Black steel, fully adjustable, standing tripod design. Weight 3.2 kg (7 lbs.) Note: All basses come with the newest version stand with the redesigned head.
END PIN STAND: (optional) Offers full freedom of movement. Height, tilt and "right bout" angle are fully adjustable providing a more conventional feel. Weight 2.3 kg (5 lbs)
SHOULDER STRAP SYSTEM: (optional) guitar style shoulder strap for full mobility
GIG BAG: (standard) Padded gig bag with integrated bow pocket, handle and backpack style strap. External pockets for stands and accessories Call (312) 666-3521 more information »
|
|
|
|
|
|
|
SKU: GS868897
Bergantino HS410 4-10" High Sensitivity speakers.
• 4-10" woofers w/ 56oz. magnet, vented pole piece
• high intelligibility tweeter
• power handling - 800 watts rms
• custom phase - coherent crossover with tweeter level control
• frequency response: 44hz - 15khz
• sensitivity: 103db • 1 watt/1meter
• impedance: 4 ohms
• dimensions: 22 3/4"W x 25 1/2"H x 15 1/2"D
• weight: 85 lbs.
Call (312) 666-3521 or (877) 385-3521 toll free outside Illinois more information »
|
|
|
|
|
|
|
SKU: GS2461164
BACK IN STOCK! Every bass player wants deep organic tone. The Octamizer™ is the innovative analog octave pedal from Aguilar. Designed to create a wide range of musical sounds an octave below your original note, you will be " octamized" ! The Octamizer™ features independent volume controls for both the "Clean" and "Octave" sounds, so dialing in the exact amount of each is a cinch. The two discrete signal paths also have their own tone controls that were specifically designed to enhance and expand their musical possibilities. The "Clean Tone" control uses a Full Spectrum Tilt EQ, allowing for the boosting of treble while cutting bass or boosting of bass while cutting treble. This unique circuit allows you to create a clean sound that creates an octave doubling effect or to blend the sounds together for a great thick, snarky synth tone. The Octamizer's "Octave Filter" control is a multipole low-pass Filter that lets you shape the octave sound from smooth and deep to edgy and aggressive. Features: Proprietary detector circuit for superior tracking Dual Filter Architecture Full Spectrum Tilt EQ for Clean sound Continuously variable multipole low-pass Filter for Octave sound Gig-saver bypass (signal passes even if your battery dies) Powered by one nine volt battery or optional universal power supply Heavy Duty steel construction Specs: Inputs: One 1/4" jack Outputs: One 1/4" jack EQ: Full Spectrum Tilt EQ for Clean sound Continuously variable multipole low-pass Filter for Octave sound Controls: Engage switch
Call (312) 666-3521 or (877) 385-3521 toll free outside Illinois more information »
|
|
|
|
|
|
|
SKU: GS3043525
Fender's new American Deluxe Jazz Bass delivers the modern features that bassists demand in a sleekly familiar design. A newly designed preamp circuit delivers deeply exhilarating active and passive tone, and powerful-yet-quiet new N3 noiseless pickups present more clean headroom and EQ range than ever. Other features include active/passive switch and passive tone control for even more tonal options, and classic Jazz Bass block fretboard inlays and binding.
Specifications:
?Body: Alder or Ash (on transparent finishes) with contoured heel
?Finish: Gloss Urethane
?Neck: Maple, Modern "C" Shape, Tinted, Gloss Polyurethan Finish
?Fingerboard: Rosewood, 9.5" Radius
?Frets: 21, Medium Jumbo
?Scale Length: 34" (864 mm)
?Nut Width: 1.5" (38.1 mm)
?Hardware: Chrome
?Tuning Keys: Fender? Light Weight Vintage-Style Tuners
?Bridge: High Mass Vintage (HMV) Bridge
?Pickguard: 3-Ply Black/White/Black
?Pickups: New N3 Noiseless Pickups
?Pickup Switching: Pan Pot/Blend Control
?Controls: Master Volume, Pan Pot (pickup selector), treble boost/cut, midrange boost/cut, bass boost/cut, active/passive mini toggle
?Strings: Fender NPS .045 -.105
?Case: SKB? high Tech Molded Case with TSA locks
?Accessories: Cable, strap, strap locks
?Unique Features: New N3 Noiseless pickups, improved electronics resulting in increased headroom, tighter low-end response. Active/ passive toggle switch, passive tone control for passive mode Stealth "A" string retainer, HMV bridge,tinted neck. Posiflex? graphite neck support rods, 5-bolt neck plate, contoured heel for easier access to upper frets. Rolled fingerboard edges, highly detailed nut and fret work, genuine bone nut. Flat head screws on battery compartment (for easy changes with a coin or pick). Black pearl (or white pearloid) block inlays, neck binding.
FREE FREIGHT! Call (312) 666-3521 more information »
|
|
|
|
|
|
|
SKU: GS3059690
Reverend's take on the versatile "PJ" set up. The hum-cancelling J-Rails bridge pickup is wound for percussive highs/mids, and the Split Brick neck pickup for strong lows and warm highs. The pickup pan control allows you to blend these two different tones... go from funk to thump and all points in-between with the twist of one knob... dialing in the perfect tone has never been easier! And the string-thru-body/locking saddle bridge combined with the five-piece neck and six-bolt neck plate guarantee sustain and notes that ring like a bell. Hardshell Case or Gig Bag optional. FREE SHIPPING! Call (773) 561-3521 more information »
|
|
|
|
|
|
|
SKU: GS2558500
Paul Reed Smith Bass 4 string Bolt on, one piece maple neck, Brazillian rosewood fretboard, 34" scale, chrome plated tuners, 3 PRS single coil pickups, plus humcanceling pickup in rear of body, four controls (volume, five way pickup selector, plus "deep" and "clear" EQ), and active circuit bypass switch, nickel plated PRS tailpiece. Includes hardshell case. Call (312) 666-3521 or (877) 385-3521 toll free outside Illinois more information »
|
|
|
|
|
|
|
SKU: GS1955239
Aguilar DB-751 Amp
THE NEWEST FROM AGUILAR! The DB 751 features an all-new hybrid preamp that combines the legendary tube-driven tone of the DB 750 with active boost and cut for greater EQ control. A perfect combination of massive headroom and three dimensional tone, the DB 751 continues the legacy set by the DB 750 - the precedent for all hybrid heads. Delivering 975 Watts at 2 ohms and 750 Watts at 4 ohms this amp is a paragon of power and beauty. Deep switch adds 5 db at 30 Hz, and Bright switch adds 5 db at 5-7 k. NOW IN STOCK! Call (773) 561-3521 or (877) 385-3521 toll free outside Illinois FREE SHIPPING! more information »
|
|
|
|
|
|
|
SKU: GS56754
Smith BSR6MW Tiger Maple top and back with walnut core and highly figured center block. Smith Hardshell case, Smith strap, and accessories included. Call (773) 561-3521 more information »
|
|
|
|
|
|
|
SKU: GS3038457
The SWR Goliath Series created the modern standard for bass instrument sound reproduction. Now the same painstaking attention to detail has been applied to our line of professional neodymium speaker enclosuresthe golight series.
These high-quality, lightweight enclosures are the result of a painstaking process in which every component of our Goliath Series was evaluated and, whenever possible, a new lightweight high- performance component was selected for use in our golight enclosures. This model features a 1x15 enclosure, 350 watts handling, custom SWR neodymium speaker, horn tweeter with attenuator, Speakon and 1/4 speaker jacks, side handles, vibration-free shock-mounted grill, front slot port. 45 lbs. (20.4 kg) Impedance: 8 ohms.
Solid tone in a lightweight package. So golight todayless work on your way to play! NOW IN STOCK! Free Shipping! Call (312) 666-3521 more information »
|
|
|
|
|
|
|
SKU: GS3080037
The first ever Bill Nash Paisley Slab body P-Bass! Convincing fading to the Paisley. 50's style single coil P pickup. Simply stunning. Includes Nash Hardshell case Call (773) 561-3521 more information »
|
|
|
|
|
|