 |
SKU: GS1874620
Introduced at the 1958 Namm Show the Fender Jazzmaster combines unique looks with a bunch of unique features! Alder body, maple "C" shape neck, rosewood fingerboard, 2 Special Design American Jazzmaster pickups, lead and rhythm circuit controls, vintage style tremolo with tremolo lock button and a deluxe brown hardshell case. Available in black, Olympic white and 3-color sunburst finishes. (Solid Body Electric Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1875773
Shaft is 3/4" long; diameter tapers from 3/16" to 2/16". (Acoustic Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS1874845
These are the screws used to secure the hinge of a Bigsby to the bottom of a guitar near the strap button. Sold individually. (Electric Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS2484176
EC, Scott Ian signature model, black finish with white pinstripe pattern, double cutaway body, bolt-on maple neck, 22-fret rosewood fingerboard, dot inlays, 1-11/16" nut width, 24-3/4" scale, two humbucking pickups with 3-way switch, volume control and "kill" switch, t-o-m bridge, strings-through-body, black headstock front with "cut-out letters" Jackson® logo and facsimile of Scott Ian's signature, sealed back tuners, chrome hardware, made in Asia (Solid Body Electric Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1875439
00 size (neck joins body at 12th fret), mahogany back & sides, sunburst Adirondack spruce top with scalloped braces (1/4" thick), tortoise binding with multi-layered black/white trim, old 18-style rosette (see D-18V), beveled and polished tortoise pickguard. Slotted peghead with ebony overlay and old-style decal, Waverly/Sloane tuning gears (3-on-plate), low profile neck, ebony fretboard (24.9" scale, 1 13/16" bone nut), pearl dot inlays at 5th, 7th, & 9th frets, ebony bridge with bone saddle. Inside label signed by Muldaur and Chris Martin IV and numbered sequentially without total. Geib style hardshell case. NOTE: The H in 00-18H is for Hawaiian, not Herringbone. Geoff's original guitar was a Hawaiian slide model. (Martin Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1874708
6 string neck, 8" banjo head mounted in cutaway electric guitar body, 2 pickups - a humbucker under the head and a single coil in the neck position, stereo signal to 1/4" output jack, pickup select switch, volume & tone controls. Maple body with sunburst finish, bound rosewood fretboard with diamond inlays (1 11/16" nut width, standard 25.4" scale length), chrome hardware, 6-in-line tuners. NOTE: Tailpiece accepts standard ball-end guitar strings. (Miscellaneous Instruments) more information »
|
|
|
|
|
|
|
SKU: GS1874165
A bold acoustic-electric concert-sized, cutaway guitar ready to be plugged in and played out. Solid Sitka Spruce top, solid rosewood back and laminated rosewood sides with black bordered abalone rosette, abalone inlays and ivoroid binding. Redesigned to be lighter and more resonant, it features the all new L.R. Baggs Stage Pro pickup with EQ, volume controls, notch filter, phase, and a chromatic tuner with in-line mute. Full specifications follow the photos. (Flat-top Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1873170
Analog modeling, 30 watts, 1x10" Jensen speaker, 2 channels, independent effects settings on each channel, 27 models, tuner and MIDI control. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS1845424
VGC+ except for two veneer cracks leading from soundhole, plus needs work (replace missing saddle wire on bass side, clean strings, replace some strings as needed, clean and lube tuners, reseat loose foot in back, tune, etc. - sold AS-IS), 32 strings, 29 frets, dot inlays, Brazilian rosewood veneered top with oval soundhole, fancy engraved plate cover for guitar-style tuners, ~22" long, 12" wide and 1-1/2" deep, built in Washington, Missouri by this noted maker (no label, but it's identical to other labelled Schwarzer's we've seen), very cool, with wooden OHSC (Miscellaneous Instruments) more information »
|
|
|
|
|
|
|
SKU: GS1875307
6-string grand auditorium, solid Sitka spruce top, solid ovangkol back and sides, soft (Venetian) cutaway, 1 3/4" nut width, white plastic binding, plastic rosette, large pearl dot inlays on fretboard, mahogany neck with ebony fingerboard, ebony bridge, Taylor Expression System pickup, 25 1/2" scale, satin finished body with gloss top, chrome tuners; hardshell case included. (Flat-top Guitars) more information »
|
|
|
|
|
|
|
SKU: GS2346999
EC- except could use minor work (dress frets, restring and set up, etc. - sold AS-IS), Coastline Series, D-size, gloss finished solid cedar top, cherry sides and back, 14 fret maple neck, 21 fret rosewood fingerboard with dot inlays, 1-13/16" nut width, 24.9" scale length, 15-7/8" lower bout, 3-7/8" to 4-7/8" body depth, rosewood bridge, tortoise plastic pickguard, decorative soundhole rosette, chrome tuners, cream body binding, built in Canada, with Boulder Alpine Series gigbag (SN:07364328) (Flat-top Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1874382
The DGTM (Diabolic Gristle Tone Manipulator) pedal is based on simplicity, durability, and most of all, tone. Inspired by Greg Koch, the DGTM brings forth a distinctive overdrive that will satisfy many an overdrive connoisseur's palate. From vintage crunch to modern tweak, it's in there. (Effects) more information »
|
|
|
|
|
|
|
SKU: GS1875754
Stop dreaming and start playing with the Squier Affinity J-bass/Fender® Rumble 15 amp pack! Features an agathis body with a black finish, a maple C-shape neck with a 20 medium jumbo fret rosewood fingerboard, 2 single coil Jazz pickups, 2 volume controls, 1 tone control, single ply white pickguard and chrome hardware. Also includes a gig bag, tuner, strap, cable, stereo headphones and an instructional DVD. (Electric Basses) more information »
|
|
|
|
|
|
|
SKU: GS1875080
VG-EC, redwood top, Indian rosewood back and sides, mahogany neck, 19-fret ebony fingerboard, Kasha bridge, 14-1/2" lower bout, 672mm scale, 2-3/16" (55mm) nut width, 3-5/8" to 3-7/8" body depth, nut appears replaced, rosewood headstock overlay, engraved gold tuners with fancy pearloid buttons, wood body bindings and purflings, L.R. Baggs active I-beam pickup installed, inside label signed by Richard, nice guitar from this noted maker (made in his pre-Gibson days) with thermoplastic HSC (black lining), price reduced (SN:XSK-5-51) (Classical Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1872958
Built with some of the classic features of a 60's era Fender® Stratocaster but with modern playability. 3-color sunburst finish, alder body, 1-piece modern "C" shape maple neck, 21 medium jumbo frets, 9.5" radius rosewood fingerboard, 25.5" scale length, 3 Custom Stratocaster Alnico 5 single coil pickups, 5-way switch, master volume, 2 tone, aged plastic parts, 3-ply tortoise shell pickguard, vintage style tremolo and tuners with chrome hardware. Less case. (Solid Body Electric Guitars) more information »
|
|
|
|
|
|