 |
SKU: GS1874953
VG-EC, great example of a "used but not abused" 50's Paul, black finish, double bound carved mahogany body, mahogany neck, bound "Fretless wonder" ebony fretboard, block inlays, 22 frets, bound headstock with diamond inlay, P-90 pickup at bridge, "Alnico V" pickup at neck, pots date 42nd week of '55, stop tailpiece, ABR-1 tune-o-matic, Kluson Super tuners (ribbed back, keystone buttons), gold hardware only slightly faded, all original and ready to rock, 1-11/16" nut, 24-3/4" scale, with OHSC, on consignment - price reduced (SN:6 9484) (Solid Body Electric Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1941770
000 size, Indian rosewood back & sides, Adirondack (red spruce) top, herringbone trim, notched diamond inlays, scalloped braces, squared off headstock, ebony fretboard and bridge, ivoroid bindings, 25.4" scale length, 1-3/4" nut width, nickel Waverly vintage style tuners, Collings pearl logo in headstock, hardshell case. NOTE - Price varies with quality of Adirondack top wood available at the time of construction. (Flat-top Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1874996
VG-EC, another fine example of why single cutaway Jrs were the "weapon of choice" for so many 70's rockers, the back (body and neck) and sides show honest play wear but the face of the guitar is very clean, mahogany body and neck, rosewood fretboard, dot inlays, 22 frets (pro refret), 1 screamin' P-90 pickup, pots date '54, original wrap over bridge / tailpiece (newer long bushings installed), original 3-on-a-plate tuners (new white buttons installed), newer jackplate installed (original jack intact), just a tone monster, feather weight (6.6 lbs), 1-11/16" nut, 24-3/4" scale, with newer thermoplastic HSC, price reduced (SN:512229) (Solid Body Electric Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1884547
500K ohm audio taper potentiometer, standard Gibson tone pot. (Electric Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS1873208
Mix any effect into your signal path and still retain your instrument's normal tone. This active effects loop mixer features a level control, loop footswitch (bypass effects for straight signal to amplifier), a discreet class-A buffer (no IC chips) for splitting the signal and driving the effects loop, and a polarity reverse switch to eliminate phase cancellation for inverted polarity pedals. Rugged steel construction. Requires 9v AC adapter, not included. (Effects) more information »
|
|
|
|
|
|
|
SKU: GS1872494
Tubaphone tone ring , 11" two-ply rim is 1/2" thick, squared-off peghead, inlaid with a lady standing on a marble out-cropping with a large pot pouring water into a pool (in various colors), laminated neck with colored veneers running up each side of the center strip, under the peghead and fingerboard, Dobson shaped heel, 25.5" scale, double action truss rod, 1-5/16" scalloped bone nut, ebony fingerboard and peghead overlay, fingerboard scalloped after 17th fret, swan in water inlay at 5th fret and dual flowers at 12th, 5-Star tuning pegs, pearl side dots, No Knot tailpiece, 14 brackets, and a Renaissance head (Open Back Banjos (5-string)) more information »
|
|
|
|
|
|
|
SKU: GS1874630
Long, Pete Seeger style, dark-stained maple neck, matching maple rim with Whyte Laydie tone ring, Renaissance head, white-bound ebony fretboard with pearl cloud inlays, fancy peghead inlay, planetary geared tuners, no-knot tailpiece, flat armrest, adjustable truss rod, coordinator rods, chrome hardware. (Open Back Banjos (5-string)) more information »
|
|
|
|
|
|
|
SKU: GS2346793
Extremely thin laminated mahogany body, solid mahogany neck with 14 fret rosewood fingerboard, maple bridge with compensated saddle, Gotoh friction pegs with white buttons, made in Japan. Very good sounding ukulele! The hyper-thin laminate used by Kiwaya was developed in Japan and results in a strong yet highly resonant instrument with very nice tone and projection. So strong that internal bracing is minimized and resonance greatly increased. (Ukuleles) more information »
|
|
|
|
|
|
|
SKU: GS1875850
IMPORT - Classic gypsy jazz guitar, large Favino style body (~16.5" lower bout) with horizontal cutaway, solid Engelmann spruce top with large-D hole and colorful ornate rosette, laminated rosewood back & sides, 14-fret 5-piece neck (maple/rosewood/maple/rosewood/maple), slotted headstock, natural gloss finish, bound top, back & fingerboard, stained rosewood fretboard & moustache bridge, Maccaferri style tailpiece, nickel hardware, ~26-3/8" scale , ~1-3/4+" neck width @ nut. These are produced in Asia. (Archtop Acoustic Guitars) more information »
|
|
|
|
|
|
|
SKU: GS2437682
EC-, ~11" rim, mahogany neck (with the famous gargoyle peghead) and resonator, white-bound 22-fret ebony fingerboard, fancy pearl inlays, 1-3/16" nut width, 26-1/8" scale, 3-1/2" deep body, Trujo-patented megaphone tone ring, nickel hardware, Presto tailpiece, spring-loaded mute, Grover pancake tuners with ivoroid buttons, concentric rings of w-b-w purfling on back of resonator, made by Gibson, on consignment, with OHSC (SN:3031-A) (Tenor/Plectrum Instruments) more information »
|
|
|
|
|
|
|
SKU: GS1874363
Very sharp looks with a great price. Cutaway dreadnought body, gloss natural finish, solid spruce top with scalloped X bracing, wood top and back body binding, abalone top inlays, 3-piece back (rosewood with quilted maple center), rosewood sides, mahogany neck, rosewood fingerboard with rosewood binding and abalone inlays, 1-11/16" nut width, rosewood bridge, abalone soundhole rosette, TP4T preamp with CP102C pickup and gold tuners with black buttons. Less case. (Flat-top Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1874924
Dreadnought body, all solid woods: rosewood back & sides, mahogany neck, spruce top, ebony fingerboard & bridge, body and neck bound, true dovetail neck/body joint, adjustable truss rod, 1-11/16" neck width at nut, satin finish, Larrivee logo peghead inlay, shaped wooden hardshell case. (Flat-top Guitars) more information »
|
|
|
|
|
|
|
SKU: GS2373090
FLATHEAD - NICKEL HARDWARE - Classic resonator banjo features 3-ply maple 11" rim, bell brass flathead tone ring, 1-piece flange, mahogany neck and resonator, ebony fretboard with ornate inlay, double-cut headstock with fancy inlay, bound neck, resonator & peghead, planetary pegs, geared 5th peg, dual coordinator rods, adjustable truss rod, ~26-1/4" scale, Presto-style tailpiece, armrest, nickel plated hardware, fiberskyn head, dual purfling rings on resonator & natural finish. Includes shaped wooden hardshell case. Imported from Asia. (Resonator Back Banjos (5-string)) more information »
|
|
|
|
|
|
|
SKU: GS2346710
Consists of under-saddle coaxial transducer element which is sensitive along its' entire length (i.e. no string spacing problems), on-board preamp and endpin jack, and a pigtail access jack which allows the pickup to be combined with an internal mic or a second pickup. Professional installation recommended. (Pickups For Acoustic Instruments) more information »
|
|
|
|
|
|
|
SKU: GS1874983
EC- except for some repaired cracks, 10-1/16" lower bout, gloss natural finish, mahogany body and 14-fret neck, 20-fret rosewood fingerboard with dot inlays, 1-3/8" nut width, 20-1/8" scale, rosewood bridge, tortoise plastic-bound body, ivoroid top purfling and i-b-i rosette, mechanical friction tuners with white plastic buttons, good sound, repaired back cracks are glued and cleated and finish has been touched-up, top crack (center seam) is glued and solid, repaired crack on lower treble side is solid but misaligned slightly, on consignment, with tweed HSC (red lining) (Ukuleles) more information »
|
|
|
|
|
|