 |
SKU: GS2346915
Semi-hollow solid korina body with a flat maple top w/flamed maple veneer (no plywood here!), glued-on 1-piece korina neck with tilt-back headstock, 22 fret bound rosewood fingerboard, pearloid block inlays, 1-11/16" nut width, 24-3/4" scale, custom volume & tone, bass contour & 3-way toggle switch, 2 calibrated Reverend covered humbucking pickups, TOM style bridge with stoptail, Reverend Pin-Lock tuners, black pickguard, chrome hardware. (Solid Body Electric Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1873993
Solid poplar body, 22" scale, enclosed tuners, hot P-bass style single coil pickups with volume and tone controls, aluminum bridge and nut, wide (3/8" 9.5mm) string spacing, carpeted body, and a swirly blue phenolic covering on the face. Factory strung to C6/Am7 (GECAGECA) 010 0115 013 017 021w 026w 036w 046w. (Lap and Pedal Steels) more information »
|
|
|
|
|
|
|
SKU: GS1873246
Aura Acoustic Imaging pedal designed specifically for dreadnought acoustic guitars. The rugged, compact 5.6" x 4" x 2.1" box contains 16 dedicated microphone sound images with a selector switch, volume control, pickup / image blend control, phase switch and mute footswitch. May be used with guitars that have either an undersaddle or soundhole pickup. Creates the essence of playing through a microphone without the hassles of playing through a microphone. Runs on either a 9V battery or power adapter (aka - wall wart). (Pickups For Acoustic Instruments) more information »
|
|
|
|
|
|
|
SKU: GS1873473
Get them while you can! Limited availability! Closed back 1x12" extension cabinets made to match the Fender Hot Rod deluxe series amplifiers. Available in all colors to match your limited edition amp. Features an 8 ohm 80 watt Celestion 12" speaker. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS2346867
VG-EC except for several repaired cracks and scratches, Hawaiian version of L-00 converted for standard play (lowered nut, etc.), 14-3/4" lower bout, 3-7/16" to 4-3/8" body depth, 12 fret V-shaped mahogany neck, sunburst finished spruce top, dark stained mahogany back and sides, 19 fret rosewood fingerboard with pearl dot inlays, rosewood bridge with slanted and compensated bone saddle, firestripe tortoise plastic pickguard, white-bound body, black headstock with large white silkscreened "Gibson" logo, 3-on-a-plate open gear tuners with white buttons, w-b-w soundhole rosette, ~24-7/8" scale, 1-29/32" nut width, replacement bone nut, L.R. Baggs I-Beam Active system installed, on consignment, with thermoplastic HSC (black lining) (SN:DG-5413) (Flat-top Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1874911
EC except weather checking and touch up work on several small dings, this COOL looking SG sounds killer, cherry finish, bound rosewood fretboard, trapezoid inlays, 22 frets, 2 well matched Pat # humbucking pickups, pots date 29th week of '65, ABR-1 bridge with nylon saddles, Vibrola tailpiece with Lyre cover, Kluson tuners, small b-w-b-w pickguard, just a fine example of a 60's rock machine, 1-11/16" nut, 24-3/4" scale, with OHSC, on consignment (SN:509575) (Solid Body Electric Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1873165
Set of 2, 1 bridge & 1 neck (neck ring is thin & bridge ring is thick), both are flat bottom for use on flat top solid bodies. (Electric Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS2480245
New, but a factory second due to a minor cosmetic flaw (ding on top). Concert resonator uke with 7-1/16" lower bout, 15" scale, wonderful nickel-plated brass body with etched Hawaiian scenes on front and back, etched side band and engraved accents on the top, back & sides, mahogany neck, 1-3/8" nut width, ivoroid-bound ebony fretboard meets the body at the 14th fret, diamond inlays, black peghead overlay with block "NATIONAL" inscribed in white, 6" resonator cone with sieve coverplate, includes shaped wooden hardshell case. Sweet deal that is rarely available from National. (Ukuleles) more information »
|
|
|
|
|
|
|
SKU: GS1875083
Alder body, 3-color sunburst finish, maple neck with a bound 20 fret rosewood fingerboard, block inlays, standard vintage Alnico magnet middle and bridge single coil pickups, 2 volume, 1 tone, 3-ply black/white/black pickguard and chrome hardware. (Electric Basses) more information »
|
|
|
|
|
|
|
SKU: GS1875965
The combined efforts of Boss and Fender® came up with this pedal, which actually conjures up the natural touch-responsive and distinctive overdriven sound of the coveted tube amp. Features include the same controls on the original Deluxe Reverb®: level, gain, treble, bass, vibrato, and reverb. This pedal also functions perfectly as a pre-gain pedal placed before an already overdriven amp to add the tonal character of the Deluxe Reverb. (Effects) more information »
|
|
|
|
|
|
|
SKU: GS1872765
Now available! The Takamine Cool Tube CTP-2 preamp delivers rich and extraordinary tone for acoustic players! The Cool Tube preamp features a single 12AU7 running at low voltage and may be blended with the input signal to give it as much warmth as you need. Direct replacement for recent Pro Series Takamine instruments with existing preamps. Includes a chromatic tuner which may be calibrated from A438-A445, a shelving/graphic EQ for cutting or boosting bass and treble frequencies, semi-parametric shapeable mid-range control and a mid-cut/boost slider. An auxiliary input jack and volume knob also are included for adding a magnetic pickup or soundboard transducer. Operates on 4 AA batteries which will deliver approximately 24 hours of playing time. Improvements over the original CTP-1 include a mute button and a faster warm up time that is quieter with no volume swell. (Requires a TP0851 4 connector input jack to be powered by a DI source) (Pickups For Acoustic Instruments) more information »
|
|
|
|
|
|
|
SKU: GS1872750
Tweed covered with oxblood grille cloth, 60 watts, all tube, two footswitchable channels, 4X10" Special Design Eminence speaker, reverb, includes footswitch and cover, effects loop, external speaker jack. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS2347054
Full-sized OM shaped, satin finished body. Solid Sitka Spruce top, laminated mahogany back and sides. Scalloped, pre-war style braces, black binding, b-w-b rosette, dot position markers, rosewood "belly" bridge and rosewood fingerboard with 14 frets to the body. ~25.5" scale length, ~1-11/16" nut width, dovetail neck joint, dual-action truss rod, chrome tuners. Gigbag included. Made in Korea, set-up and inspected in Bend, Oregon. (Flat-top Guitars) more information »
|
|
|
|
|
|
|
SKU: GS1874023
Licensed Line "Series I" replica of the Bigsby B7 model, this version is Die-cast & polished to a nickel like finish. Best suited for thin archtop hollowbodies & solid body electrics such as Gibson ES335's, Les Pauls, Heritage H-535's, Epiphone Sheratons, Ally Cats, Dot's, Guild® Bluesbird, etc... that have a stud mounted Tune-O-Matic style bridge. These units have the roller retaining bar to give you the angle over the bridge that is needed. Requires two holes to be drilled into the top of the guitar & four on the bottom where the hinge attaches to the body. All mounting hardware is included. (Electric Guitar Parts) more information »
|
|
|
|
|
|
|
SKU: GS1872738
Straight type toggle switch with cream switch cap. (Electric Guitar Parts) more information »
|
|
|
|
|
|