|
SKU: GS3059050
Tim Reede Custom Guitars
The Librada is an acoustic/electric guitar designed for the gigging musician that wants one guitar that will give great acoustic guitar sounds as well as great electric guitar sounds. The acoustic guitar circuit is completely separate from the electric guitar circuit and there are two output jacks. The acoustic sound can be sent to an acoustic guitar amp or into a direct box to a PA system. The electromagnet pickup can be run to an electric guitar amp. You can use one or the other or you can use both at the same time for a stereo effect. This is a great guitar to use with sampling petals. You can sample an acoustic rhythm and play an electric lead over it.
This guitar is made with a sitka spruce soundboard and Balsamo back and sides with ebony binding. The neck is mahogany and the fingerboard is rosewood. The body is 3" deep and the lower bout is 13 1/2". The scale length is 25.4". The bridge is a pin less design and it is made of african blackwood. more information »
|
|
|
|
|
|
|
SKU: GS3059052
Tim Reede Custom Guitars
This triple 0 guitar is also a twelve fret guitar but it has the traditional twelve fret body. The scale length is 25.4. The nut and saddle and bridge pins are bone. It is made with an Adirondack soundboard and an Indian Rosewood back and sides. The bridge and the fingerboard are also Indian Rosewood. The binding is curly maple. The Inlays are white mother of pearl. The pyramid bridge and slotted peg head and the marquetry purfling and rosette give this guitar a unique retro look. Waverly tuning machines help make this a special instrument. more information »
|
|
|
|
|
|
|
SKU: GS3059049
Tim Reede Custom Guitars
The Meridian five string has a low B string in addition to the E,A,D, and G that four string basses have. It is a five piece laminated neck through construction. The fingerboard has a compound radius from 12-20 inches. It has Hipshot ultra light tuning machines and a Hipshot bridge. The pickups are made by Nordstrand and it has an active tone circuit pre amp made by Aguilar. Battery changing requires no tools. The controls are Volume, Blend, Passive Tone (If your battery goes dead in the middle of a set, don't despair, simply switch to the passive circuitry by pulling this knob and rock on). The active tone controls are Bass, Middle (pull to switch midrange frequency) and Treble. The scale length is 35 inches. It comes with Dunlop Strap locks.
On this bass the pickups are fat single coils made by Nordstrand and it has an 18 volt active tone circuit. The woods are, quilted mahogany and Alder on the body and a maple, bloodwood and mahogany laminated neck. more information »
|
|
|
|
|
|
|
SKU: GS3059046
Tim Reede Custom Guitars
The Phoenix electric guitar has a basswood body with a quilted maple drop top. The neck is laminated alder and maple with a bolt on design. The fingerboard is ebony with mother of pearl marking dots. Scale length is 24. 6.25". The tuning machines are made by Gotoh. The pickups are Lindy Fralin custom hand would P90s. The electronic controls feature a hum canceling center position and a phase reverse switch. With over wound bridge pickup, this is a dirty little rocker. The finish is a hand applied sunburst that resembles glowing embers, and the flame inlay on the head stock ties into the fire theme. This is how this guitar got the name of the mythical bird of fire. more information »
|
|
|
|
|
|
|
SKU: GS3059045
Tim Reede Custom Guitars
This guitar is inspired by the rosewood tele used by George Harrison, Delaney Bramlett, and Duane Allman. The original guitar was given to George Harrison. He used the guitar for the "Let it be" rooftop sessions. In 1969 Harrison gave the guitar to Delaney Bramlett. This guitar is made from brazilian cherry, body and neck, and has a chambered body to add resonance and reduce the weight of the very dense wood. The fingerboard is rosewood with mother of pearl marking dots. This also has Lindy Fralin Pickups and a five position switch. It has retro looking hardware and it also has a 7.25" fingerboard radius like the original. more information »
|
|
|
|
|
|
|
SKU: GS3059051
Tim Reede Custom Guitars
This OM guitar has cocobolo back and sides and an adirondack spruce soundboard. The neck is mahogany and the binding is curly maple. The bridge is African blackwood. The fingerboard and the head cap are ebony. The scale length is 25.4". The inlays are pau abalone and mother of pearl. The bridge pins, nut and saddle are bone. The tuning machines are made by Gotoh. more information »
|
|
|
|
|
|
|
SKU: GS3059053
Tim Reede Custom Guitars
This is a Dreadnought with a cutaway. It has block mottled Makore' back and sides and a bear claw sitka soundboard. It has a Mahogany neck and rosewood binding with an ebony fingerboard and bridge. It has a bone nut, saddle and bridge pins. The fingerboard inlays are abalone. The rosette has an abalone ring inlayed into a band of Makore". The scale length is 25.4" and the tuning machines are Gotoh 510. more information »
|
|
|
|
|
|
|
SKU: GS3059055
Tim Reede Custom Guitars
This archtop guitar has a AA figured European maple back and sides and a AA European spruce soundboard. Both the top and the back are solid wood and hand carved. It has a 17" lower bout and the sides are 3".The accent wood is cocobolo. The neck is figured maple and the inlays are gold mother of pearl. The scale length is 25" and it has parallel bracing for a more traditional construction and a strong projection. This guitar also has a Kent Armstrong suspended pickup. more information »
|
|
|
|
|
|
|
SKU: GS3059047
Tim Reede Custom Guitars
The Meridian five string has a low B string in addition to the E,A,D, and G that four string basses have. It is a five piece laminated neck through construction. The fingerboard has a compound radius from 12-20 inches. It has Hipshot ultra light tuning machines and a Hipshot bridge. The pickups are made by Nordstrand and it has an active tone circuit pre amp made by Aguilar. Battery changing requires no tools. The controls are Volume, Blend, Passive Tone (If your battery goes dead in the middle of a set, don't despair, simply switch to the passive circuitry by pulling this knob and rock on). The active tone controls are Bass, Middle (pull to switch midrange frequency) and Treble. The scale length is 35 inches. It comes with Dunlop Strap locks.
This bass has an Alder body and a laminated neck of flame maple, curly cherry and walnut and is re enforced with carbon fiber rods. The body is capped with flame maple. The ebony fingerboard has a 12 to 20 inch compound radius and has flame maple binding. The body is shaped on the front and back to make it more comfortable. The bridge is the Hipshot A style, this gives an additional adjustment to alter the string spacing. All the hardware is gold plated. The frets are a special gold colored alloy that is harder than standard fret wire so they will last longer. The strings are gold colored made by Aurora. There are custom inlays of gold mother of pearl on the fingerboard. One of the most exciting features is the side marking dots are lighted with a blue LED using fiber optics that run through the neck. They can be easily turned on or off when needed.
more information »
|
|
|
|
|
|
|
SKU: GS3061821
Tim Reede Custom Guitars
This dreadnought is made with an amazing curly Koa back and sides and an Adirondack spruce soundboard. The binding on the body is Ebony and the binding on the neck and headstock is curly Koa. This guitar has a laminated neck of Mahogany, Maple and Walnut. The fingerboard is Ebony and the bridge is African Blackwood. The head cap is Ebony and the inlays are made of white mother of pearl and paua abalone. The scale length is 25.4". The truss rod is a two way adjustable"Hot Rod". The tuning machines are Waverlys with ebony buttons. genuine bone nut and saddle are also included as well as bone bridge pins with abalone dots. The finish is Lacquer. This guitar also has an upgraded purfling and the rosette with Koa and paua abalone. This guitar comes with an Ameritage case with a humidity control system. more information »
|
|
|
|
|
|
|
SKU: GS3061822
Tim Reede Custom Guitars
This OM has a beautiful Ziricote back and sides and an Adirondack Spruce soundboard with Koa binding. The fingerboard is ebony as is the head cap, both have Koa binding as well. The neck is laminated Mahogany, Maple, and Walnut. It has a two way truss rod. This guitar has an upgrade rosette that is made with Ziricote and Paua Abalone. The scale length is 25.4". The tuning machines are Gotoh 510s. This guitar has a modern headstock and bridge design. Also added to this guitar is the K&K Ultra Pure Mini pickup/preamp. Also included is an Ameritage case with a humidity control system. more information »
|
|
|
|
|
|
|
SKU: GS3059054
Tim Reede Custom Guitars
This guitar is a dreadnought with Malaysian Blackwood back and sides. It has an Adirondack spruce soundboard and Koa binding.The fingerboard is ebony and the bridge is African Blackwood. The inlays are mother of pearl and abalone. The Tuning machines are Gotoh 510 chrome with black buttons. This guitar also features a rosette design with the Malaysian Blackwood and abalone. more information »
|
|
|
|
|
|