|
SKU: GS3103663
The Songwriter 30 was the last Trainwreck amplifier design that was built by the legendary Kenneth Fischer. Due to his failing health, Ken was only able to build two of these magnificent hand wired amplifiers. Komet Amplification has been awarded the license by Trainwreck to recreate the Songwriter 30 in exacting detail to the original. The result: The Komet Songwriter. We are using "Bree", one of the two original Trainwreck Songwriter amps that is on long term loan to Komet, as our reference amp. Every new Songwriter 30 is meticulously hand built and voiced, then it is play tested in comparison to "Bree" to be sure it sounds just as perfect. It's powered by a quartet of cathode biased EL84/6BQ5 output tubes. The pre amp incorporates two 12AX7 tubes. It's meticulously assembled and hand wired with only the best sounding and most reliable components.
Other features include:
Solid construction, finger jointed, birch ply head box.
Maple front panel with Komet triangle logo, maple back panel.
Proprietary, custom designed power and output transformers.
Precision laser cut chassis constructed from solid 1/8" welded aircraft grade aluminum.
Completely sealed, military-grade 2 Watt potentiometers.
Audiophile grade, ceramic tube sockets with gold plated contacts.
Front control panel includes: Bass, Volume & Treble controls and a three position selectable bright switch.
Back control panel: IEC power input, Mains and H.T. fuse receptacles, 4, 8 and 16 Ohm selectable speaker outputs.
Available with the option of 120 V / 240 V operation.
Dimensions: 20 5/8" long by 10" deep by 9" tall
Weight: approximately 35 pounds
Output power (before clipping): 33 Watts
Tube Compliment: 2 - 12AX7, 4 x EL 84 / 6BQ5
Hand wired and manufactured by Komet Amplification, built with the finest quality components.
For more information about the Komet Songwriter, please call us at 314-781-7500 more information »
|
|
|
|
|
|
|
SKU: GS3142780
Hawaiian koa?s captivating beauty is matched by a tone that blossoms over time, especially in the midrange. Its voice is bright and focused, with warm overtones that slowly emerge, adding sweetness and depth. Premium all-wood appointments, led by the Island Vine fretboard inlay, celebrate the wood?s natural appeal.
Other specifications include:
Shape Grand Auditorium
Number of Strings 6
Back/Side Wood Hawaiian Koa
Scale length 25-1/2"
Top Wood Hawaiian Koa
Body Length 20"
Electronics ES?
Body Width 16"
Cutaway Venetian
Body Depth 4 5/8"
Nut & Saddle Bone
Neck Width 1-3/4"
Neck/Heel Tropical Mahogany
Bracing CV Bracing with Relief Rout
Fretboard Wood Ebony
Fretboard Inlay Island Vine
Headstock Overlay Ebony
Binding Indian Rosewood
Bridge Inlay None
Bridge Pins Ebony
Tuners Taylor Gold
Truss Rod Cover Ebony
Back/Side Finish Gloss
Top Finish Gloss
Neck Finish Satin
Pickguard None
Case Taylor Deluxe Hardshell Brown
Number of Frets 20
Armrest Binding None
Back Config 2-piece No Wedge
Backstrap Wood None
Backstrap Finish None
Brand of Strings Elixir Light
Buttons Gold
Edge Trim Maple
Filler (Body) Clear
Filler (Neck) Clear
Fingerboard Ext None
Fretboard Binding Indian Rosewood
Heel Cap Binding Indian Rosewood
Heel length 3-1/2"
Purfling Material Fiber
Peghead Finish Gloss
Peghead Purfling None
Peghead Inlay Island Vine
Peghead Binding Indian Rosewood
Peghead Logo Taylor Maple
Peghead Type Standard
Rosette Mat. Rosewood/Maple/Rosewood
Rosette Size Single Ring
Stain/Sunburst Shaded Edgeburst
Type of Neck Joint Scarf
Wedge None
For more information about the Taylor K24ce, please contact us.
more information »
|
|
|
|
|
|
|
SKU: GS3134514
The Suhr Classic Antique is the result of an ultimate collaboration between Suhr Guitars and J. Black. This guitar has an Alder body and a custom aging job to give it a vintage style and feel. Then, it's topped off with J. Black's nitrocellulose finish, to provide an elegant look. The JST ML pick-ups deliver a brand-new Suhr custom guitar sound.
Other specifications include:
Olympic White
Alder body
Roasted Maple With Indian Rosewood
Hybrid Headstock - No Step
Even C Medium neck profile .840-.920
9"-12" Radius
Tusq nut
Heavy frets
510 2-Post Bent Saddle (Steel Block)
1.650 Nut Width
Chrome Hardware
Suhr locking tuners
Aged Green 3-Ply guard
Vol, Tone, Tone, 5-way
JST ML single pick-ups parchment
20096
For more information about the Suhr Classic Antique, please call us at 314-781-7500. more information »
|
|
|
|
|
|
|
SKU: GS3141930
Guitars don't get much better than the Suhr Standard Carve Top in Trans Carmel. This electric guitar is carved from mahogany body with quilted maplw and a maple neck with african rosewood fret board. Reliable and stable, so you can play it as hard as you want! With EMG pickups, this guitar delivers rich, full tones unlike anything else.
Other specifications include:
Trans Caramel
Scraped binding
Mahogany body
Quilt Maple top
Mahogany neck
Indian Rosewood Fretboard
Gloss fingerboard neck
Painted headstock
Suhr custom neck shape .800-.850
10"-14" Radius
Tusq nut
medium frets
Gotoh Floyd
1.650 Nut width
Gold hardware
Suhr locking tuners
Vol, Tone, 5-way, p/p for EMG-SPC
EMG SA (neck position)
EMGSA (middle position)
EMG85 (bridge position)
Clay side dots and face dots
Full binding on neck and body
19904
For more information about the Suhr Standard Carve Top, please call us at 314-781-7500. more information »
|
|
|
|
|
|
|
SKU: GS3140677
Handmade in Stevensville, Maryland, the PRS 2-channel custom 50 amplifier is the newest model available through the PRS Custom Amp Designs program. Similar to PRS?s Private Stock program, Custom Amp Designs explores new, enhanced, and personalized amplifier options. The 2-Channel Custom, for example, takes the popular 2-Channel ?H? to the next level by adding several additional features to help musicians shape their tone. These versatile and articulate amplifiers are well suited for alternate tunings.
50 watts
2-Channels
6L6 Power Tubes
Global reverb, volume, treble, mid, bass, and a bright switch for each channel, lead master volume, clean master volume
Solo boost, reverb assign, presence control, switchable power amp bass boost, switchable mid shift, and 3 button led footswitch
4,8 and 16 ohm selection, two output jacks, fixed bias effects loop
For more information on this PRS Custom 50 amp, give us a call.
more information »
|
|
|
|
|
|
|
SKU: GS3135403
The G & L Legacy is one of the last guitars ever designed by Leo Fender. Using G&L Vintage Style Alnico pickups, the Legacy delivers some of the biggest strat tones you'll ever hear. Made with quality craftsmanship, from Fullerton & Fender, the Legacy is made with a maple neck, rosewood fretboard and alder body with chrome hardware. Top it off with the tobacco sunburst finish, and you'll never want to put it away. It's fun to play, and it's action packed. Check it out today.
Other specifications include:
Lake Placid Blue
CLF-100 Alnico pickups
Alder body
Hard Rock Maple
Rosewood fingerboard
#1 neck, 1 5/8" nut
12"? radius
12:1 ratio, sealed lubrication, adjustable knob tension tuners
G&L Dual Fulcrum vibrato with chrome-plated brass saddles
5-position pickup selector w/PTB system
Chrome Hardware
3-ply tortoise
G&L hardcase included
For more information about the G&L Legacy, please contact us.
more information »
|
|
|
|
|
|
|
SKU: GS2903873
Model:Ashdown Kylstron 500 Head
Here is what Ashdown hast to say!
Proudly built in the UK, the Classic Series is Ashdowns flagship bass amp range. Comprising of 500 and 1000-watt Klystron heads, a selection of cabinets and a range of 500-Watt combos, the Classics are about doing everything better more volume, more dynamics, an extended frequency range and greater versatility.
The 575-Watt Klystron 500 head features a single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. A built-in dual band compressor acts separately on the high and low frequency components of the signal to provide precise control, while the on-board sub-harmonic generator turns the Classics into powerhouses of tone.
CALL FOR MORE INFO!
314-781-7500 more information »
|
|
|
|
|
|
|
SKU: GS2214732
Model: Fulltone Catalyst
A tiny little Distortion Generator that:
has NONE of the drawbacks listed above
is a GREAT FUZZ/Distortion (with toggle switch set to "Flame" position)
is a Phenomenal clean-boost, and overdrive as well (with toggle switch set to "Spark" setting)
has something I came up with called Max-end-all 2 Band EQ: an excellent hi-cut with a great Bass control having the proprietary ability to bring in incredible sounding midrange when the pot reaches around 3 o'clock on its rotation.
can be so raw yet can be so refined, and so musically useable that it defies description and musical boundries..don't be confused when you see this on Country rigs and Top 40 pedalboards..sometimes you get lucky and develop something truly unique.
Catalyst is that.
CALL FOR MORE INFO!
314-781-7500 more information »
|
|
|
|
|
|
|
SKU: GS3138995
The Huss & Dalton Crossroads Deluxe from the traditional collection is widely used among acoustic guitarists looking for a timeless look and feel. The Crossroads is known for its vintage stylings. However, it's not all about looks. This guitar has the sound too. Delivering lively and open acoustic tones, the sound is incredible.
Other specifiations of the Huss & Dalton Crossroads Deluxe include:
Maple back and sides
Sitka spruce top
Vintage Sunburst finish
Lighter red spruce top bracing
Gloss neck finish
Rosewood fingerboard with pearl dot inlay and straight Rosewood Bridge
Crossroads peghead shape
Gotoh TK-0700 tunning machines w/cream buttons
1 ?? vintage taper neck
24.75? scale length
Cream bindings with black/white/black rosette
Huss and Dalton tweed case
#3811
For more information about the Huss & Dalton Crossroads Deluxe Acoustic Guitar, please call the shop. more information »
|
|
|
|
|
|
|
SKU: GS3061058
Again, responding to what people ask me to do this new amp the LDW 17/39 is in response to the request to say make a 'the little brother' to the JJN 50/100 with a little twist.
The LDW 17/39 offers all of what is described in the JJN 50/100 but runs "Class A" in the 17 watt lower power mode giving the player that classic creamy "Class A" overdrive with smooth compression offering a new twist to the wide range of, but improved upon, sounds we've come to expect from our favorite amplifiers from England from the mid 60's through the mid 80's. Just Killing it with a Divided by 13 2x12F cabinet.
* 17 watts Class A
* 39 watts Class AB1
* Power Section [2] EL 34
* Master Volume
* Half Power Switch
* 4,8, and 16 Ohm outputs
CALL FOR MORE INFO!
314-781-7500 more information »
|
|
|
|
|
|
|
SKU: GS3127836
For a parlor guitar, your can't go wrong with a Larrivee P-05 Italian Spruce. And this particular Larrivee P-05 Italian Spruce Top is a one-of-a-kind parlor guitar that delivers huge sound and great action. Built with a solid Mahogany wood construction and a 3-piece South American Mahogany dovetail neck, it's built with the same quality construction for which Larrivee is known. Sounds amazing and plays like a dream. You can't go wrong with a P-05. It's the perfect parlor guitar, and this particular model, is a one-of-a-kind. Be sure to check it out.
Other specifications include:
Solid wood construction
Mahogany back and sides
Single piece neck
Italian Spruce soundboard
African Ebony fretboard and bridge
Rosewood body binding
Symmetrical Parabolic X-Bracing
Dovetail neck joint
JCL headstock inlay in pearl
Chrome Tuners
LArrivee Custom Beveled pickguard
Abalone Rosette
Ivoroid Fretboard binding
Silver Microdot fretboard inlays
Medium gauge strings
Tusq nut and saddle
Lower Bout: 13.125?
Upper Bout: 9.125?
Waist: 7.875?
Depth: 4?
Scale length: 24?
Nut width: 1 & 3/4??
Compound fretboard radius (16? to 21?)
Nickel/Silver frets
Fret width: 2.5mm (0.0985?)
Fret height: 1.0mm (0.0394?)
gloss uv finish
Limited Lifetime Warranty
For more information about the Larrivee P-05 Italian Spruce, please call us. more information »
|
|
|
|
|
|
|
SKU: GS3043474
* root beer
* flame maple top
* fully carved top
* Solid mahogany body
* Grained ivoroid top binding
* black/white top purfling
* High gloss lacquer finish
* Custom humbucking pickups by Jason Lollar
* Tone-Pro bridge and tailpiece
* custom-made grained ivoroid knobs and pickup rings
* 22-fret bound mahogany neck
* Madagascar rosewood fingerboard
* Mother-of-pearl parallelogram fingerboard inlays
* 24 7/8? scale length
* Brazilian peghead veneer
* Ivoroid bound peghead
* Mother-of-pearl Collings logo
* Sperzel vintage tuners with ivoroid buttons
CALL FOR MORE INFO!
314-781-7500 more information »
|
|
|
|
|
|
|
SKU: GS3043547
* Body/Neck 1-piece Honduras mahogany
* Ebony Fret Board
* 24 frets
* 25? (635mm) Scale
* Schaller M6 Tuners
* DiMarzio PAF (DP103) Pickups
* 3-way Toggle Switch, 2 volume & 2 tone
* Zemaitis original solid duralumin Bridge/Tailpiece
CALL FOR MORE INFO!
314-781-7500 more information »
|
|
|
|
|
|
|
SKU: GS3095546
The Stratocaster has shaped an entire generation of music. The Fender Custom Shop Custom Deluxe Stratocaster HSS is continuing that tradition with the best combination of old and new. Some new features of the Custom Deluxe Strat HSS include the custom shop 69 single-coil pickups, an a flame maple neck, a lacquer finish, access heel, and locking tuners. Still delivering crisp, clean Stratocaster sounds, this Custom Shop Custom Deluxe Strat HSS is a must-see.
Other features include:
Natural
Ash Body
Lacquer Finish
Vintage Hardware
Locking Tuners
Deluxe 2PT Trem
Flame Maple Neck
6100 Frets
9.5" Radius
LSR Nut
"C" Shape Neck
Custom Shop '69 Strat Pickups (Neck and Middle)
Duncan TB-11 Humbucking Bridge Pickup
3 Ply Mint Guard
5-way switch
For more information about the Fender Custom Shop Custom Deluxe Stratocaster HSS, please call us at 314-781-7500. more information »
|
|
|
|
|
|
|
SKU: GS3143405
Introducing the all-new EVH? 5150III amplifier from Eddie Van Halen?s brand, EVH. EVH 5150III heads and cabinets deliver the holy grail of tone - a truly clean channel, a super-heavy crunch channel and an off-the-scale overdrive channel you simply won?t believe. You get the incredible tones Eddie Van Halen has chased his whole life, as Eddie himself has defined and designed each of the 5150III amplifier?s three channels. Available in black or ivory, with an unmistakable look and sound that?s pure EVH.
Other specifications include:
Series: 5150III?
Amplifier Type: Tube
Wattage:
100 Watts
Effects Loop: 1/4" - (Send/Return)
Inputs: One - 1/4"
Auxiliary Input: N/A
Channels: Three - (Clean, Crunch, and Lead)
Controls: Gain, Low, Mid, High, Volume, Channel Select, and Presence for Each Channel
Hardware
Pilot Light Jewel: Red Jewel
Handle: Molded Plastic Strap with Nickel-Plated Caps
Cover/Grill Cloth: (400) Ivory Textured Vinyl Covering
(000) Black textured vinyl covering
Amplifier Length: 11.5" (29.3 cm)
Amplifier Width: 29.75" (756 mm)
Amplifier Height: 10.25" (260 mm)
Amplifier Weight: 55 lbs. (24.94 kg)
Tubes
Preamp Tubes: 8 x 12AX7
Power Tubes: 4 x 6L6
Accessories
Footswitch: 4-Button Footswitch Included
Knobs: Chicken-Head Style Pointer
For more information about the EVH 5150 III 100 watt, please call us at 314-781-7500. more information »
|
|
|
|
|
|