|
SKU: GS3142417
VGC+, somewhat yellowed olympic white finish, maple neck, pearl dot markers, black-w-b pickguard, thumbrest screw holes on bass side (no thumbrest), original pickup rewired with switches for series/parallel and phase reverse, pots dated 1979, replacement bridge, great P-bass sound, 1-11/16''nut, 34'' scale, 10.9 lbs, with rectangular wooden HSC (green/brown lining) (SN:S890475) Item ID 55U-4923. 13 photos at http://www.elderly.com/vintage/items/55U-4923.htm more information »
|
|
|
|
|
|
|
SKU: GS3142022
VG-EC except 1 (small) repaired top crack, double bound D body, spruce top, herringbone top trim and rosette, rosewood sides and (3 piece) back, 14 fret mahogany neck, bound ebony fretboard, dot inlays, 20 frets, ebony bridge, tortoise plastic pickguard, bound headstock features rosewood overlay with logo, Grover Rotomatic tuners, built in Kansas, 1-23/32'' nut, 25-1/2'' scale, with newer HSC, on consignment (SN:76-2367) Item ID 20U-14658. 14 photos at http://www.elderly.com/vintage/items/20U-14658.htm more information »
|
|
|
|
|
|
|
SKU: GS3142436
VGC+, single cutaway, hollow body, antique sunburst finish, arched German spruce top, flamed maple back and sides, 3-piece maple / beech neck, neck joins body at 16th fret, white-bound 22-fret rosewood fretboard with dot inlays, zero-fret, w-b-w double bound body, 2 Hofner ''Staple'' humbucking pickups, 2 volume controls, bass, treble and rhythm / solo switch, adjustable ebony bridge with adjustable saddles, trapeze tailpiece, pearloid pickguard and control plate, 12-7/8'' lower bout, 30'' scale, 1-19/32'' nut width, weighs 4.4 lbs, built in Germany, on consignment, with rectangular silver ''Bullet'' OHSC (black lining) (SN:E10184) Item ID 55U-5024. 13 photos at http://www.elderly.com/vintage/items/55U-5024.htm more information »
|
|
|
|
|
|
|
SKU: GS3142437
EC- except needs minor work (clean, setup, etc. - sold AS-IS), BTB Series, 4-string, offset double cutaway ash, faded walnut finish (has a sort of brown/green look now), bolt-on 3-piece maple neck with rosewood peghead overlay, 24-fret rosewood fingerboard with dot inlays, Monorail individual bridges, Neutrik locking 1/4'' jack, 2 soapbar pickups, VM-3b active electronics, master volume, blend, 3-band EQ with sweepable mid, satin chrome hardware, 1-5/8'' nut width, 35'' scale, built in Japan, gigbag (SN:F9925925) Item ID 55U-4861. 12 photos at http://www.elderly.com/vintage/items/55U-4861.htm more information »
|
|
|
|
|
|
|
SKU: GS3142421
VGC+, transparent blonde finish on ash body, one-piece maple neck with skunk stripe and black dot inlays, 20 frets, one split-coil pickup with volume and tone controls, 50's style dome knobs replace originals, nickel hardware (no covers), replacement w-b-w pickguard, good sound and playability, replacement 1-5/8'' brass nut, 34'' scale, weighs 11.0 lbs, with thermoplastic OHSC (brown lining, metal replacement handle, missing plastic where original handle mounted and on back corner) (SN:707858) Item ID 55U-4942. 13 photos at http://www.elderly.com/vintage/items/55U-4942.htm more information »
|
|
|
|
|
|
|
SKU: GS3141971
EC, 15-3/4'' lower bout, natural gloss finish, solid spruce top with ''Solitaire'' inlay and exclusive ''SBS'' bracing system, solid mahogany back, laminate mahogany sides with sound port on bass side, black-bound body, pearloid top purfling, rounded cutaway, 14 fret mahogany neck, 20 fret rosewood fingerboard with dot inlays, black-bound headstock with pearloid trim fretures logo inlay, chrome tuners with pearloid buttons, rosewood bridge, Boulder Creek AB4-T preamp / pickup system, 1-23/32'' nut, 25-1/2'' scale, made in China, no case (SN:10080118) Item ID 20U-14416. 12 photos at http://www.elderly.com/vintage/items/20U-14416.htm more information »
|
|
|
|
|
|
|
SKU: GS3142524
VG-EC, dark stained all mahogany construction, 6-1/8'' lower bout, neck joins body at 12th fret, 13-fret rosewood fingerboard with pearl dot inlays, reglued mahogany bridge, white silkscreened script ''Gibson'' headstock logo, replacement mechanical friction tuners with white plastic buttons (originals in case pocket with broken buttons), some nicks and dings but overall very nice, good sound, on consignment, with faux alligator OSSC (blue lining), Price Reduced (SN:34414) Item ID 180U-1463. 12 photos at http://www.elderly.com/vintage/items/180U-1463.htm more information »
|
|
|
|
|
|
|
SKU: GS3141961
VG-EC, Martin employee made 00-size, 14-1/4'' lower bout, spruce top with X-brace positioned 1-1/4'' under the soundhole, scalloped braces, Brazilian rosewood back and sides, zipper backstrip, ivoroid bound body with herringbone purfling, V-shaped mahogany neck meets the body at 12th fret, ebony fingerboard with unique slotted diamond and dot inlays, slotted headstock with rosewood overlay, modern Waverly tuners with ivoroid buttons, replacement ebony pyramid bridge, abalone soundhole rosette, some touchup of top finish, back and sides are refinished, 5 repaired back cracks (one splined) are hard to see under the new finish, neck heel repaired and finish touched up, really fine sound!!! new bone nut, 1-7/8'' nut width, ~24-7/8'' scale, employee-made Martin guitars are quite rare and often unique (as is this one), as each employee was allowed to make (with or without the assistance of their co-workers) a guitar for themselves, no Martin logos or serial numbers were allowed on the instru more information »
|
|
|
|
|
|
|
SKU: GS3142481
EC, Greg Deering Limited model, figured walnut neck, rim and (double bound) resonator, bound ebony fretboard with abalone underlay, GDL inlay pattern, 22 frets, 24 brackets, 1 piece flange, flathead tone ring, Presto tailpiece, armrest, dual coordinator rods, bound headstock features overlay with logo and floral inlays, geared tuners and 5th string peg, great sound, 1-1/4'' nut, ~26'' scale, with OHSC (SN:09214019994) Item ID 70U-3687. 14 photos at http://www.elderly.com/vintage/items/70U-3687.htm more information »
|
|
|
|
|
|
|
SKU: GS3142103
VG-EC except repaired top crack, double bound 14-3/8'' body (maple binding), spruce top, rosewood back and sides, mahogany neck, rosewood fretboard, zero fret, 19 frets, rosewood bridge, slotted headstock, 3-on-a-plate tuners, built in Italy, imported by CMI, 2'' nut, 650mm scale, with semi-HSC, on consignment (SN:169) Item ID 28U-2532. 11 photos at http://www.elderly.com/vintage/items/28U-2532.htm more information »
|
|
|
|
|
|
|
SKU: GS3142260
EC, a real looker, purple mist finish on killer blistered maple top, natural finish on single cutaway makore body, wide / fat Indian rosewood neck, ebony fretboard, ''J'' eagle inlay pattern, 22 frets, 2 59/09 humbucking pickups, PRS wrap over bridge / tailpiece, headstock features silver eagle inlay, back of headstock features PRS's and builder's signature, PRS tuners with ebony buttons, 9 lbs., 1-11/16'' nut, 27'' scale, with certificate and deluxe OHSC, on consignment (SN:10 168564) Item ID 30U-17776. 13 photos at http://www.elderly.com/vintage/items/30U-17776.htm more information »
|
|
|
|
|
|
|
SKU: GS3142008
EC, double bound 15-1/8'' body (rosewood binding), all solid woods, spruce top, herringbone rosette, rope pattern top trim, mahogany back, sides and (14 fret) neck, ebony fretboard, side dot markers, 20 frets, Brazilian rosewood bridge, black pickguard, headstock overlay features logo, Schaller tuners, 1-11/16'' nut, 25-1/2'' scale, with HSC, on consignment (SN:C3807) Item ID 20U-14653. 14 photos at http://www.elderly.com/vintage/items/20U-14653.htm more information »
|
|
|
|
|
|
|
SKU: GS3141956
EC, double bound D body, spruce top, abalone top trim and rosette, scalloped braces, rosewood back and sides, 14 fret mahogany neck, bound ebony fretboard, hexagon inlays, 20 frets, ebony bridge, tortoise plastic pickguard, bound headstock features rosewood overlay with C.F. Martin logo inlay, gold Martin modern tuners, 1-11/16'' nut, 25.4'' scale, with thermoplastic OHSC, on consignment (SN:1379658) Item ID 10U-6341. 14 photos at http://www.elderly.com/vintage/items/10U-6341.htm more information »
|
|
|
|
|
|
|
SKU: GS3142308
EC-, walnut finish, double bound semi-hollow maple body, small 3-piece maple neck (1-9/16'' nut), bound rosewood fretboard, small block inlays, 22 frets, 2 Pat # decal humbucking pickups (all pots and capacitiors are recent replacements, guitar is wired like ES-335), Bigsby vibrato tailpiece (replaced arm bolt and end strap button has been repostioned, there is an extra hole), ABR-1 tune-o-matic bridge (nylon saddles), b-w-b-w pickguard (included in case), headstock overlay with crown and logo inlays, Kluson tuners (exposed screw holes in back of headstock), 1969 was the only year of production for this guitar, 24-3/4'' scale, with Gibson OHSC (purple lining, replaced handle and one latch) (SN:540380) Item ID 40U-5248. 14 photos at http://www.elderly.com/vintage/items/40U-5248.htm more information »
|
|
|
|
|
|
|
SKU: GS3142296
EC, double bound 16'' body, sunburst finish on maple top, f-holes, dark natural finish on maple back and sides, mahogany neck, rosewood fretboard, dot inlays, 20 frets, 1 HOT P-90 pickup, trapeze tailpiece, adjustable rosewood bridge, large w-b-w pickguard with (faded) epsilon (slashed C) logo, headstock overlay features logo, 3-on-a-plate tuners, built in Kalamazoo, this is the Epi version of the Gibson ES-125T, 1-5/8'' nut, 24-3/4'' scale, with OSSC, on consignment - price reduced (SN:065048) Item ID 40U-5300. 14 photos at http://www.elderly.com/vintage/items/40U-5300.htm more information »
|
|
|
|
|
|