|
SKU: GS3144452
EC, sunburst finish, double bound semi hollow maple body, mahogany neck, bound Brazilian rosewood fretboard, block inlays, 22 frets, 2 Pat # humbucking pickups (all black bobbins), of interest is the neck pickup was installed at the factory with the screw side in (reverse of ''normal''), pots date 24th week of '63, ABR-1 tune-o-matic bridge (proper nylon saddles), (factory) Bigsby tailpiece, b-w-b-w pickguard, headstock overlay features crown and logo inlays, Kluson tuners with double ring keystone buttons, very clean instrument, 1-11/16'' nut, 24-3/4'' scale, with OHSC, on consignment - price reduced (SN:128513) Item ID 40U-5125. 14 photos at http://www.elderly.com/vintage/items/40U-5125.htm more information »
|
|
|
|
|
|
|
SKU: GS3144161
EC, double bound 16'' body (maple binding), all solid woods, spruce top, abalone rosette, mahogany back and sides, 14-fret mahogany neck, bound ebony fretboard, micro dot inlays, 20 frets, ebony bridge, clear plastic pickguard, headstock overlay features silver trim and logo inlay, modern diecast tuners, factory Larrivee B-Band electronics, built in Canada, 1-3/4'' nut, 25-1/2'' scale, on consignment, with OHSC (black lining) (SN:61041) Item ID 20U-14654. 14 photos at http://www.elderly.com/vintage/items/20U-14654.htm more information »
|
|
|
|
|
|
|
SKU: GS3144573
VGC+, cherry finish, mahogany body and neck, rosewood fretboard, dot markers, 20 frets, the low hovering cloud pickup, electronics, bridge, bridge cover, tuners, hardware and b-w-b pickguard are all original, new mute felt installed, a great workhorse, 1-5/8'' nut, 30-1/2'' scale, with newer Gibson HSC, on consignment (SN:534255) Item ID 55U-4744. 12 photos at http://www.elderly.com/vintage/items/55U-4744.htm more information »
|
|
|
|
|
|
|
SKU: GS3144599
EC- except could use some minor work, a cool Fairbanks & Cole with ~11-15/16'' skin head on thin wood rim, 32 original hooks with square end nuts, bi-level grooved tension hoop (so hooks don't stick up above hoop), ~27-1/8'' scale, oak neck has carved heel with slats (rarely seen), 17-fret ebony fingerboard and ebony backstrap, decorative saw-cut inlays on neck and headstock, Maltese Cross ivory friction pegs with cutout cloverleaf centers, carved ivory tailpiece stamped ''PAT. 9.21.86'', very collectible banjo, sold AS-IS (call for details), with recent gigbag (SN:8408) Item ID 60U-2671. 16 photos at http://www.elderly.com/vintage/items/60U-2671.htm more information »
|
|
|
|
|
|
|
SKU: GS3144162
EC- except for repaired top crack below bridge, natural finish, double bound 16-1/8'' body (maple body binding), figured spruce top, abalone rosette, rosewood back and sides, mahogany neck with repaired crack near nut and fingerboard seam on treble side, bound ebony fretboard, micro dot inlays, 20 frets, ebony bridge, clear plastic pickguard, headstock overlay with logo inlay, modern tuners, built in Canada, very nice, 1-3/4'' nut, 25-1/2'' scale, with OHSC (black lining) (SN:52557) Item ID 20U-14493. 14 photos at http://www.elderly.com/vintage/items/20U-14493.htm more information »
|
|
|
|
|
|
|
SKU: GS3144575
VGC, sunburst finish, reverse body and headstock, rosewood fretboard, dot markers, 1 T-bird humbucking pickup, volume and tone controls, cracks around jack have been repaired, hardware and electronics appear original (pot codes are obscured by solder) including bridge position hand rest, original w-b-w pickguard with nice T-bird emblem and one broken corner, headstock has been replaced and refinished (very good, solid luthier's scarf joint and finish touch-up, original peghead with legible serial # included in case), sounds and plays great, 1-1/2'' nut, 34'' scale, weighs 8.6 lbs, on consignment, with OK condition OHSC (taped seams, replacement handle, refurbished gold interior) - price reduced (SN:159752) Item ID 55U-5010. 13 photos at http://www.elderly.com/vintage/items/55U-5010.htm more information »
|
|
|
|
|
|
|
SKU: GS3144344
EC+, blood orange sunburst finish on a great looking maple top with natural edging, natural finished chambered mahogany body, single teardrop soundhole, bolt-on maple neck, 22-fret rosewood fingerboard, abalone dots at 12th fret, 1-3/4'' nut width, 25-1/2'' scale, two Fralin humbucking pickups, TonePros wraparound bridge / tailpiece, ebony overlays on front and back of headstock, chrome Gotoh tuners, hand built in USA, with OHSC, price reduced (SN:0511003 314) Item ID 30U-15908. 13 photos at http://www.elderly.com/vintage/items/30U-15908.htm more information »
|
|
|
|
|
|
|
SKU: GS3144673
VG-EC except needs work (glue ~5'' back crack, replace missing binding on treble side of neck, dress frets, setup, etc. - sold AS-IS), all monkey pod wood (kamani) construction (streaked but no figure), white-bound top, soundhole and fingerboard, white dot markers, gold foil label and peghead decal, rosewood nut bridge and fingerboard, 12 frets, 1-7/16'' nut width, ~13-5/8'' scale, mechanical friction tuners with white buttons, made in Hawaii, price reduced Item ID 180U-1154. 11 photos at http://www.elderly.com/vintage/items/180U-1154.htm more information »
|
|
|
|
|
|
|
SKU: GS3144648
EC- except needs some work (solder loose resonator mount, heat press neck, dress frets, setup, etc. - sold AS-IS), dark stained maple rim and resonator, 24 brackets, Silver Bell tone ring, 2-piece maple neck, ivoroid-bound 19 fret ebony fingerboard with varied inlay pattern, ''B&D / SILVER / BELL'' and fancy pearl inlays on headstock overlay, non-original geared tuners with ivoroid buttons, magnetic pickup installed, Kershner tailpiece, 1-3/16'' nut, 23'' scale, with newer HSC (wine red lining) (SN:13557) Item ID 80U-2514. 13 photos at http://www.elderly.com/vintage/items/80U-2514.htm more information »
|
|
|
|
|
|
|
SKU: GS3144659
EC except needs minor work (dress frets, setup, etc. - sold AS-IS), sunburst finished maple neck, 3-ply rim and white-bound resonator, 19-fret rosewood fingerboard, 1-3/16'' nut width, 26-3/8'' scale, 11'' Fiberskyn head, 16 brackets, mechanical friction tuners with white buttons, made by Gibson, all original, with newer SSC Item ID 80U-2526. 12 photos at http://www.elderly.com/vintage/items/80U-2526.htm more information »
|
|
|
|
|
|
|
SKU: GS3144528
EC-, the second of two very rare limited edition basses designed for and in cooperation with Stanley Clarke, 041 of the initial run of ~50 basses (it appears no one knows with certainty how many instruments were actually made and released, somewhere between 25 and 50, the molds were then destroyed), black polyurethane enamel finish, original design neck-thru double cutaway body of high density foam and fiber encasing a tempered steel channel running the length of the instrument, two adjustable steel truss rods in the neck, ebony fingerboard with 24 frets and abalone dots in metal rings inlays, proprietary bridge/tailpiece and roller nut assemblies, dual humbucking ''Bartolini'' designed pickups, volume, tone, pickup selector and phase controls, Schaller M-4 tuners, 1-5/8'' width at the zero fret, 30-1/2'' scale, weighs 7.0 lbs, very rare and unique bass, a real interesting piece in the evolution of the electric bass, made in USA, on consignment, with original manuals and paperwork, inc more information »
|
|
|
|
|
|
|
SKU: GS3144429
EC except for repaired crack in body near heel of neck, natural finish, great looking flamed koa top on chambered (single cutaway) sapele body, (''T-lock'') bolt-on mahogany neck, 22-fret ebony fingerboard, progressive diamond inlays, 1-11/16'' nut width, 24-3/4'' scale, thin b-i-b purfling strip separates koa top from sapele body, two Taylor mini humbucking pickups, 1 volume and 1 tone control (custom machined aluminum knobs), 5-way switch, Taylor modern style bridge and tuners, ebony headstock overlay with pearl logo and floral inlay, built in USA, with deluxe OHSC (black lining) (SN:20080429909) Item ID 30U-16245. 13 photos at http://www.elderly.com/vintage/items/30U-16245.htm more information »
|
|
|
|
|
|
|
SKU: GS3144195
EC except 1 open back crack, acoustic-electric, double bound D size body, rounded cutaway, gloss finish, spruce top, mahogany back, sides and 14-fret neck, ebony fretboard, slotted diamond inlays, 20 frets, ebony bridge, tortoise plastic pickguard and body binding, Grover Rotomatic tuners, factory Fishman Prefix Onboard Blender pickup / preamp system, sold AS-IS (needs back crack repair, troubleshoot electronics that cut in and out, light fret work, strings, set up, etc.), 1-11/16'' nut, 25-1/2'' scale, with brown tolex OHSC, price reduced (SN:991005105) Item ID 20U-12481. 15 photos at http://www.elderly.com/vintage/items/20U-12481.htm more information »
|
|
|
|
|
|
|
SKU: GS3144192
EC, acoustic-electric, grand auditorium (NEX) body, 15-3/4'' lower bout, sunburst finish all around, solid spruce top, flamed maple sides and solid back, 14 fret maple neck, 20 fret ebony fingerboard with slotted diamond and square inlays, rosewood bridge with split saddles, factory Takamine CT-4BII pickup / preamp system with built in tuner, cream-bound fretboard and headstock, cream-b-c-b-c double-bound body, tortoise plastic pickguard, abalone soundhole rosette, gold tuners, ~25.5'' scale, 1-11/16'' nut width, sharp guitar, with brown OHSC (green lining) (SN:08060781) Item ID 20U-14125. 15 photos at http://www.elderly.com/vintage/items/20U-14125.htm more information »
|
|
|
|
|
|
|
SKU: GS3144537
EC, 3-color sunburst finish, alder body, bolt-on maple neck, 20-fret rosewood fingerboard, white dot inlays, two single coil pickups with 2 volume and 1 tone controls, passive electronics, combo bridge (either top-load or strings through body), chrome hardware, w-b-w pickguard, 1-7/8'' nut width, 34'' scale, weighs 9.6 lbs, on consignment, with ATA-style OHSC (black lining) (SN:Z8094879) Item ID 55U-4960. 13 photos at http://www.elderly.com/vintage/items/55U-4960.htm more information »
|
|
|
|
|
|