|
SKU: GS3141940
VG-EC, 000-size, 15-1/4'' lower bout, spruce top with scalloped bracing, mahogany back and sides, 14-fret mahogany neck, 20-fret Brazilian rosewood fingerboard with pearl dot inlays, 1-11/16'' nut width, 24.9'' scale, Brazilian rosewood bridge (bridge plate patch added, new pins), tortoise plastic pickguard and body binding, replacement nickel Waverly tuners with ivoroid-buttons (original tuners included), Brazilian rosewood headstock overlay, neck has been reset, fingerboard has been refretted, essentially all original with only one minor repaired crack near endpin, this guitar has a great vibe along with fine sound, with period brown HSC (purple lining), price reduced (SN:88296) Item ID 10U-4679. 15 photos at http://www.elderly.com/vintage/items/10U-4679.htm more information »
|
|
|
|
|
|
|
SKU: GS3142435
VGC+ except needs work (reglue bridge, replace missing bridge pins, clean electronics, setup, etc. - sold AS-IS), single cutaway, natural finished (finish has worn spots on lower bass bout and two cracks along bass side of strings, looks like finish has been touched-up and is uneven), cream-bound solid spruce top, dark brown chambered maple body, bolt-on maple neck with fretless ebony fingerboard, ebony bridge with Godin saddle transducer, Godin preamp, volume, mid, treble and bass sliders, sealed back Godin tuners, 1-1/2'' nut width, 34'' scale, weighs 8.4 lbs, assembled in the USA from parts made in Canada, NO CASE (SN:00134213) Item ID 55U-4998. 10 photos at http://www.elderly.com/vintage/items/55U-4998.htm more information »
|
|
|
|
|
|
|
SKU: GS3142038
EC- except could use minor work (install proper wire clips on interior for pickup, dress frets, setup, etc. - sold AS-IS), gloss finish, solid spruce top, flamed maple back and sides, 14 fret maple neck, flamed maple headstock overlay, gold tuners with cream buttons, 21 fret rosewood fingerboard with dot inlays, rosewood bridge, cream-bound body and headstock, factory installed L.R. Baggs pickup / preamp system, 24-3/4'' scale, 1-13/16'' nut width, built in Canada by LaSiDo, with Fort EEP semi-HSC (SN:04015249) Item ID 20U-14644. 14 photos at http://www.elderly.com/vintage/items/20U-14644.htm more information »
|
|
|
|
|
|
|
SKU: GS3141992
VG-EC except small repaired treble side pickguard crack, jumbo body with 17'' lower bout, figured maple neck, sides and back, spruce top (top has been refinished), 7-ply bound top, 5-ply bound back, open moustache bridge with pearl inlays, two non-original engraved tortoise plastic pickguards, white-bound rosewood fretboard with pearl crown inlays, white-bound headstock with pearl ''Gibson'' and small crown inlays, gold Kluson individual tuners with single ring plastic Keystone buttons, bridge plate was patched by our shop, 1-11/16'' nut, 25-3/8'' scale, real good sound, top work appears to have been done by Gibson in the '70's, on consignment, with 1970's Gibson HSC (purple lining) - price reduced (SN:A18114) Item ID 20U-13553. 14 photos at http://www.elderly.com/vintage/items/20U-13553.htm more information »
|
|
|
|
|
|
|
SKU: GS3142218
EC, Les Paul / SG model, cherry finish, mahogany body and neck, bound Brazilian rosewood fretboard, trapezoid inlays, 22 frets, 2 PAF humbucking pickups (all black bobbins), pots date 2nd week of '62, ABR-1 tune-o-matic bridge (nylon saddles), side to side tremolo, b-w-b-w pickguard, headstock overlay features crown and logo inlays, killer tone, 1-11/16'' nut, 24-3/4' scale, with cool OSSC, on consignment (SN:125824) Item ID 30U-18084. 13 photos at http://www.elderly.com/vintage/items/30U-18084.htm more information »
|
|
|
|
|
|
|
SKU: GS3142208
VG-EC, sunburst finish, bound maple top, mahogany body, 3 piece maple neck, bound rosewood fretboard, trapezoid inlays, 22 frets, 2 mini humbucking pickups, stop tailpiece, ABR-1 tune-o-matic bridge (Graphtech saddles installed), headstock overlay features logo inlay and model decal, 80's Gibson Deluxe tuners installed, newer speed knobs installed, a great R&B machine, 1-11/16'' nut, 24-3/4'' scale, with 80's Gibson brown HSC (SN:70049544) Item ID 30U-17816. 13 photos at http://www.elderly.com/vintage/items/30U-17816.htm more information »
|
|
|
|
|
|
|
SKU: GS3142439
EC-, sunburst finish, white-bound maple body, bolt-on maple neck, 20 fret Brazilian rosewood fingerboard with micro dot inlays and zero fret, 2 Mosrite pickups (bridge pickup rewound), 3-way switch, single volume and tone controls, w-b-w pickguard (small piece of pickguard missing under neck pickup), 1-9/16'' nut, 30-1/2'' scale, weighs 8.4 lbs, on consignment, with OHSC (red lining) (SN:R0210) Item ID 55U-4771. 13 photos at http://www.elderly.com/vintage/items/55U-4771.htm more information »
|
|
|
|
|
|
|
SKU: GS3142069
EC, gloss finish, double bound grand auditorium size GS style body, cedar top, abalone rosette, mahogany back and sides, satin finish on 14 fret mahogany neck, bound ebony fretboard, dot inlays, 20 frets, ebony bridge, compensated saddle, rosewood headstock overlay features logo inlay, gold diecast tuners, 1-3/4'' nut, 25-1/2'' scale, with OHSC (burgundy lining) (SN:11020900077) Item ID 20U-14596. 13 photos at http://www.elderly.com/vintage/items/20U-14596.htm more information »
|
|
|
|
|
|
|
SKU: GS3142387
EC except needs work (level frets, setup, etc. - sold AS-IS), tobacco sunburst finish, solid spuce top, solid mahogany back and sides, SBS-3 bracing system, side port and offset top soundhole, set mahogany neck with rosewood fingerboard, dot inlays, 21 frets, headstock is finished to match body, pearloid top and peghead purfling, black body binding, rosewood bridge with large black pins, AB4-T preamp with built-in tuner, 1/4'' and XLR connectors, chrome diecast tuning machines, ~1-3/4'' nut width, 34'' scale, made in China, NO CASE (SN:10080009) Item ID 200U-1990. 12 photos at http://www.elderly.com/vintage/items/200U-1990.htm more information »
|
|
|
|
|
|
|
SKU: GS3142364
EC- except lots of capo dents and scrapes on back of neck, sunburst finish, double bound 14-1/4'' figured maple body, 12-fret square maple neck, solid (bound) headstock, bound ebony fretboard, pearl lyre inlays, 19 frets, poinsettia coverplate, dual screen holes, ebony peghead overlay with pearl lyre ''Dobro'' logo, spider bridge, 10-1/2'' spun aluminum cone, chrome Grover mini Rotomatic tuners, 1-7/8'' nut, 24.5'' scale, with black OHSC (blue lining), price reduced (SN:D8 041 95) Item ID 50U-2025. 15 photos at http://www.elderly.com/vintage/items/50U-2025.htm more information »
|
|
|
|
|
|
|
SKU: GS3142409
EC- except needs minor work (trouble-shoot electronics, dress fret ends, setup, etc. - sold AS-IS), black finish, maple neck with rosewood fingerboard, dot inlays, 20 frets, ''Fender® Jazz Bass®'' logo with ''Made in Korea'' under ''Jazz Bass,'' 2 single coil flush magnet ''J'' pickups, 2 volume and 1 tone controls, vintage-style hardware, 1-2/16'' nut width, 34'' scale, weighs 9.2 lbs, grounding strap from bridge pickup to bridge base, with Squier® gigbag (SN:E1058094) Item ID 55U-4859. 12 photos at http://www.elderly.com/vintage/items/55U-4859.htm more information »
|
|
|
|
|
|
|
SKU: GS3142494
EC-, dark stained curly maple neck & resonator, black Heli-mount hardware, Cyclotronic ball bearing system with cocobolo tone ring, 22-fret radiused ebony fingerboard with tunneled 5th string (all 5 tuning pegs are on the peghead), straight pull tailpiece, ~26-1/2'' scale length, 1-5/16'' nut width, railroad spikes installed in frets 7 and 9, includes adjustment wrenches and tweed archtop OHSC (brown lining) (SN:1098-216) Item ID 70U-3722. 15 photos at http://www.elderly.com/vintage/items/70U-3722.htm more information »
|
|
|
|
|
|
|
SKU: GS3142073
EC, gloss natural finish, double bound D body, all solid woods, spruce top, scalloped braces, abalone rosette, mahogany back and sides, 14 fret mahogany neck, katalox (Mexican ebony) fretboard, side dot markers, 20 frets, katalox bridge, tortoise plastic pickguard, headstock overlay features logo inlays, modern tuners with black buttons, built in China, 1-3/4'' nut, 25-1/2'' scale, with OHSC (SN:10070811) Item ID 20U-14090. 14 photos at http://www.elderly.com/vintage/items/20U-14090.htm more information »
|
|
|
|
|
|
|
SKU: GS3142089
VG-EC except needs minor work (dress frets, setup, etc. - sold AS-IS), D-size body, 15-3/4'' lower bout, black finish, solid spruce top (~3-1/2'' dent in top beneath bass side of bridge, not through finish), mahogany back and sides, white-bound top, back, neck and headstock, 14-fret neck with rosewood fingerboard, split diamond inlays, rosewood bridge with 4 pearl dots, b-w-b pickguard, factory installed ''Takamine Equalizer'' pickup system, Takamine branded die-cast tuners with metal buttons, chrome hardware, made in Japan, with thermoplastic OHSC (black lining, duct tape covers broken edge of lid), price reduced (SN:92080513) Item ID 26U-1939. 13 photos at http://www.elderly.com/vintage/items/26U-1939.htm more information »
|
|
|
|
|
|
|
SKU: GS3141963
EC-, 15-5/8'' lower bout, natural finish on spruce top with scalloped bracing and forward shifted X-brace, large (4-3/8'' diameter) soundhole with double herringbone rosette, rosewood back and sides, 14-fret mahogany neck, 22-fret ebony fingerboard with pearl dot inlays, fossilized ivory bridge pins, bone nut and compensated saddle installed, ebony bridge, herringbone top trim, black plastic pickguard, white-bound body, rosewood headstock overlay, original Martin diecast tuners, 1-23/32'' nut width, 25.4'' scale length, with Martin thermoplastic HSC (blue lining) (SN:521008) Item ID 10U-6351. 14 photos at http://www.elderly.com/vintage/items/10U-6351.htm more information »
|
|
|
|
|
|