|
SKU: GS3143282
EC, gloss black finish on alder body, maple neck and 20 fret fingerboard, brass nut, Seymour Duncan Basslines SPB-3 Quarter Pound split coil Precision Bass® pickup, knurled black master volume and master tone controls, black bridge and strap buttons, chrome tuners, 1-ply black pickguard, Roger Waters' signature facsimilie on back on headstock, 34'' scale, 1.750'' nut width, weighs 8.2 lbs, made in Mexico, with gigbag (SN:MX10261666) Item ID 55U-5047. 12 photos at http://www.elderly.com/vintage/items/55U-5047.htm more information »
|
|
|
|
|
|
|
SKU: GS3143292
VGC, sunburst finish, reverse body and headstock, rosewood fretboard, dot markers, 1 T-bird humbucking pickup, volume and tone controls, cracks around jack have been repaired, hardware and electronics appear original (pot codes are obscured by solder) including bridge position hand rest, original w-b-w pickguard with nice T-bird emblem and one broken corner, headstock has been replaced and refinished (very good, solid luthier's scarf joint and finish touch-up, original peghead with legible serial # included in case), sounds and plays great, 1-1/2'' nut, 34'' scale, weighs 8.6 lbs, on consignment, with OK condition OHSC (taped seams, replacement handle, refurbished gold interior) - price reduced (SN:159752) Item ID 55U-5010. 13 photos at http://www.elderly.com/vintage/items/55U-5010.htm more information »
|
|
|
|
|
|
|
SKU: GS3143161
EC except repair around jack and a bit of wear on the side of the fretboard, historically interesting example of a '58 Dot neck, Sunburst finish, double bound maple body, mahogany neck with a very cool wide / fat feel, no binding on the Brazilian rosewood fretboard, dot inlays, 22 frets, the 2 PAF humbucking pickups (all black bobbins), electronics, stop tailpiece, ABR-1 tune-o-matic bridge, b-w-b-w-b long pickguard and hardware are all original, headstock overlay features crown and logo inlays, original Kluson tuners, marked ''2'' on back of headstock, a tone machine, 1-11/16'' nut, 24-3/4'' scale, with OHSC (bottom seam is rough), on consignment (SN:A27992) Item ID 40U-5418. 14 photos at http://www.elderly.com/vintage/items/40U-5418.htm more information »
|
|
|
|
|
|
|
SKU: GS3143222
VG-EC except needs some work (sand and buff adhesive scars where pickup was mounted to top, refret, setup, etc. - sold AS-IS) 14-1/8'' lower bout, gloss sunburst finish, 12 fret round maple neck with slotted headstock, 19 fret rosewood fingerboard with dot inlays, white-bound maple body, soundwell, spider bridge, chrome fan design coverplate, 2 screenholes, 3 holes at end of fretboard, open-gear 3-on-a-plate tuners, 1-13/16'' nut width, 24-1/2'' scale, with HSC (red lining) (SN:8 2165 5D) Item ID 50U-2430. 14 photos at http://www.elderly.com/vintage/items/50U-2430.htm more information »
|
|
|
|
|
|
|
SKU: GS3142815
EC, D-size, HPL top has graphic by artist Robert F. Goetzl showing C.F. Martin Sr., the Martin factory and early Martin guitars, back and sides are Indian rosewood pattern HPL, modified low oval multi-lam neck, rosewood fretboard with side dots only, rosewood bridge with compensated saddle (we reglued the bridge), black enclosed tuning gears, 1-11/16'' nut width, 25.4'' scale, made in Nazareth, PA, with OHSC (green lining) (SN:1307888) Item ID 10U-6177. 13 photos at http://www.elderly.com/vintage/items/10U-6177.htm more information »
|
|
|
|
|
|
|
SKU: GS3143283
EC, 3-color sunburst finish on alder body, maple neck with rosewood fingerboard, 20 frets, standard hardware, 2 standard 5-String Jazz Bass® single coil pickups, black fluted knobs, 2 volume and 1 tone, 3-ply parchment pickguard, 34'' scale length, 1-3/4'' nut width, weighs 9.8 lbs, made in Mexico, with gigbag (SN:MX10071136) Item ID 55U-5040. 12 photos at http://www.elderly.com/vintage/items/55U-5040.htm more information »
|
|
|
|
|
|
|
SKU: GS3143047
EC-, metallic green finish, rosewood fretboard, dot markers, 22 frets, 3 G&L single coil pickups, w-b-w pickguard, G&L tremolo, G&L modern style tuners, very nice, trem bar is missing, 1-11/16'' nut, 25-1/2'' scale, weighs 7.0 lbs, on consignment, made in USA, no tremolo arm, backplate or case (SN:G031122) Item ID 30U-17923. 11 photos at http://www.elderly.com/vintage/items/30U-17923.htm more information »
|
|
|
|
|
|
|
SKU: GS3142978
EC+, single cutaway, transparent blue finish on flame maple top on a chambered sapele body, trapezoid contour sapele bolt-on neck, ebony headstock overlay, 22 fret ebony fingerboard, M-O-P ''Deco'' dots and side dots, Chrome Gotoh 381 tuners, chrome Tonepros hardware and 2 chrome covered Seymour Duncan PhatCat humbucking pickups with single volume and tone controls, chrome knobs with ebony insets, 3-way toggle, 1-3/4'' nut width, 25'' scale, weighs 7.0 lbs, with OHSC (blue lining), made in USA, price reduced (SN:11281) Item ID 30U-15633. 13 photos at http://www.elderly.com/vintage/items/30U-15633.htm more information »
|
|
|
|
|
|
|
SKU: GS3143280
VGC except body is refinished white (OK work with general orange peel texture) and there is a combination of newer and older parts, body, pickup, pickguard, grounding plate, neck plate and electronics are all consistent with 1959, the fretless maple neck with rosewood fingerboard has 1978 decal, chrome Fender®/Schaller tuners, replacement Leo Quann Badass Bass II bridge, 1-5/8'' nut, 34'' scale, made in USA, with 70's Fender HSC (orange lining is loose in places and lid is broken along one edge) (SN:39494/S889797) Item ID 55U-4995. 13 photos at http://www.elderly.com/vintage/items/55U-4995.htm more information »
|
|
|
|
|
|
|
SKU: GS3143089
EC except needs work (dress fret ends, setup, etc. - sold AS-IS), gloss black finish, mahogany body with maple top, classic single cutaway styling, set neck with rosewood fingerboard, not top inlays, side dots only, white bound top, neck and headstock, 2 humbucking pickups, 3-way switch with volume and tone controls, T-O-M bridge and stop tailpiece, chrome hardware, 1-7/8'' nut width, 25'' scale, weighs 7.6 lbs, made in China, NO CASE (SN:J111050166) Item ID 30U-18097. 11 photos at http://www.elderly.com/vintage/items/30U-18097.htm more information »
|
|
|
|
|
|
|
SKU: GS3143033
VGC+, a great player's guitar, body has been refinished sunburst (a long time ago), 1 piece maple neck has been oversprayed (decal removed from headstock), refretted (a long time ago), dot markers, 21 frets, set of Fender® grey bobbin pickups (dated 1965) installed, all new pots, wires, caps and plastic parts installed, 3 way switch set up to control the neck and bridge pickups as nk/both/br, middle pot is set as a volume to mix the middle pickup in, tremolo is original (newer bar), set of period correct tuners installed (there have been more than several sets of tuners on the instrument), cool looks and great sound, 1-11/16'' nut, 25-1/2'' scale, with original pickguard and (center pocket) tweed OHSC, on consignment (SN:14588) Item ID 30U-18152. 13 photos at http://www.elderly.com/vintage/items/30U-18152.htm more information »
|
|
|
|
|
|
|
SKU: GS3143097
EC, black finish, acoustic and electric sounds in one package, solid spruce top, one-piece chambered Honduran mahogany body, set Honduran mahogany neck, bound rosewood fretboard, dot inlays, 22 frets, 2 Seymour Duncan '59 humbucking pickups, Fishman Power Bridge (with piezo pickups in saddles), VIP preamp, 3-way selector switch, volume and tone control for humbuckings, piezo / hum pickup blend control, mono/stereo switch, stereo Y-adapter plug, 1-11/16'' nut, 25-1/4'' scale, with OHSC, price reduced (SN:7 0486) Item ID 30U-16125. 13 photos at http://www.elderly.com/vintage/items/30U-16125.htm more information »
|
|
|
|
|
|
|
SKU: GS3143267
GC except alder body has been completely refinished natural and played hard for years, bass was originally sunburst with finish still under neck plate and in neck pocket, back of maple neck is stained from years of use and finish is worn through the entire length, Brazilian rosewood curved veneer board with clay dots, 20 jumbo replacement frets, neck dated ''7 SEP 62 A,'' original pickups, neck volume, tone pots and gounding strip, pot code is ''3046114,'' tortoise-w-b-w pickguard, original bridge plate with later saddles (originals are in case), string mutes are removed and holes filled, all parts appear to be correct unless noted, the playability and sound are remarkable, replacement 1-1/2'' bone nut, 34'' scale, 8.8 lbs, with newer ('70/80s) Fender® HSC (orange lining) (SN:86742) Item ID 55U-4868. 13 photos at http://www.elderly.com/vintage/items/55U-4868.htm more information »
|
|
|
|
|
|
|
SKU: GS3142849
EC, acoustic-electric, natural finish, double bound slope shoulder D body, ladder braced 3-ply laminate spruce top features ''John and Yoko'' drawings, mahogany back and sides, mahogany neck, bound rosewood fretboard, trapezoid inlays, 20 frets, ''October 9, 1940'' engraved at 12th fret, reverse belly rosewood bridge, factory P-90 style pickup mounted at end of fretboard, top mounted volume and tone controls, tortoise plastic pickguard, headstock overlay features signature and logo inlays, vintage style tuners with keystone buttons, 1-23/32'' nut, 24-3/4'' scale, on consignment, with OHSC (SN:12690048) Item ID 20U-14680. 14 photos at http://www.elderly.com/vintage/items/20U-14680.htm more information »
|
|
|
|
|
|
|
SKU: GS3142843
EC-, 16-1/4'' lower bout, natural gloss finish, Adirondack spruce top with scalloped bracing (small indentation in top at bass side lower bout), rosewood back and sides, ivoroid-bound body, fingerboard, and headstock, 14 fret mahogany neck, 20 fret ebony fingerboard, ebony headstock overlay with pearl logo inlay, Schaller tuners, multi-ring soundhole rosette with abalone center ring, tortoise plastic pickguard, ebony bridge, L.R. Baggs iBeam Active pickup installed, 1-11/16'' nut, 25.4'' scale, built by Bryan Galloup, includes certificate of authenticity, on consignment, with arched lid HSC (black lining) (SN:9712) Item ID 20U-14625. 14 photos at http://www.elderly.com/vintage/items/20U-14625.htm more information »
|
|
|
|
|
|