|
SKU: GS61157
This is the T-Rex version of the tube screamer pedal. It provides instant access to the kind of warm overdrive and emotive distortion usually reserved for 30-year-old tube amps. Alberta delivers a creamy, yet crunchy sound with a smooth mid-range boost, reminiscent of the old Ibanez TS-808. Albertas sweet tube-like harmonics and wide and natural sounding tonal spectrum faithfully reproduces all the subtle nuances of your playing dynamics. more information »
|
|
|
|
|
|
|
SKU: GS61108
From the house of Peterson, the revered manufacturer of highly precise strobe tuners, meet the StroboFlip Compact Virtual Strobe Tuner. more information »
|
|
|
|
|
|
|
SKU: GS61000
All the way down to the original glass Mullard OC44 transistor, the "Dyna-Ranger" is a 5 range version of the favorite single germanium transistor treble booster from England used by an array of players from Eric Clapton and David Gilmore to Tony Iommi and Brian May. Going from position 1 to 5, the "Dyna-Ranger" covers all tones from the traditional treble booster to more in the middle "woman tones" to thick and lower Sabbath tones. It is THE perfect sounding boost/drive pedal. more information »
|
|
|
|
|
|
|
SKU: GS61126
The delay is based on the now out of production DM-2 circuit. That was the starting point for the design. It features delay time, level and repeat controls, as well as a tone control which alters the flavour of the repeats ( hi-cut filter). The unit uses two 4096 stage BBDs providing a max delay time of 600ms with quiet operation, (no clock noises or hiss). The unit is housed in a die cast enclosure with 4 control knobs and two footswitches. One footswitch selects effect/bypass ( true bypass), and the secondary footswitch allows selection between a short and long delay path (~300ms and ~600ms). This enables finer control over the short delay range; effectively a delay and slapback selection at your foot. more information »
|
|
|
|
|
|
|
SKU: GS61055
The T-Style pickups are the models that Joe Barden first offered. These innovative pickups created a new model of high-end replacement pickups as opposed to those that were merely variations on established designs or basic repair parts.
Originally designed for Danny Gatton (and with Danny testing every step of the way) they have become the first choice of professional Tele players worldwide. The tone of these pickups can be described as absolutely vintage in character, but with greatly expanded fidelity. The lows, mids, and highs are all equal in strength, eliminating the thin, or "tinny" sound that is often a problem with Tele-styled guitars.
The T-Neck is remarkable in that it can be adjusted so that its output is actually equal to the T-Bridge, thus solving the age-old Tele player's complaint: huge output differences between the bridge and neck pickups. While these pickups can be adjusted to greatly exceed the output level of stock pickups, the authentic Tele twang and snap is maint more information »
|
|
|
|
|
|
|
SKU: GS61054
The T-Style pickups are the models that Joe Barden first offered. These innovative pickups created a new model of high-end replacement pickups as opposed to those that were merely variations on established designs or basic repair parts.
Originally designed for Danny Gatton (and with Danny testing every step of the way) they have become the first choice of professional Tele players worldwide. The tone of these pickups can be described as absolutely vintage in character, but with greatly expanded fidelity. The lows, mids, and highs are all equal in strength, eliminating the thin, or "tinny" sound that is often a problem with Tele-styled guitars.
The T-Neck is remarkable in that it can be adjusted so that its output is actually equal to the T-Bridge, thus solving the age-old Tele player's complaint: huge output differences between the bridge and neck pickups. While these pickups can be adjusted to greatly exceed the output level of stock pickups, the authentic Tele twang and snap is maint more information »
|
|
|
|
|
|
|
SKU: GS61109
The StroboStomp2 replaces the original Peterson StroboStomp-the world's first Virtual Strobe tuner in a stompbox! It features improved battery life; additional Sweetened Tunings for electric & acoustic guitar, bass, Dobro, pedal steel guitar,and electric violin; and offers four user-programmable Sweeteners. The StroboStomp2's die-cast aluminum chassis features industry standard Neutrik 1/4" and XLR jacks , blue accent lighting, and is finished in a Titanium Pearl coat that will keep it looking great even after years of getting stomped on!.
100% True Bypass is accomplished via a rugged 3PDT stomp switch, which allows the player to mute both regular and DI outputs to allow silent tuning with an incredible 0.1 cent accuracy! Open-string Buzz Feiten settings for guitar, bass, and 12-string are included with drop-and capo-tuning transposition and, if all that is not enough, a built-in active DI (with a power saving mode for longer battery life) for acoustic and bass guitarists. The StroboSt more information »
|
|
|
|
|
|
|
SKU: GS61116
Rated "must have" by Guitar Player Magazine, this is the best octave/fuzz available anywhere, faithfully recreating the tones of the classics. The Experience also features the 'Swell ' mode which simulates a backwards tape effect. more information »
|
|
|
|
|
|
|
SKU: GS61072
This is a 2 channel, 3 mode pre-amplifier (booster) for driving your amplifiers into overdrive or saturation. The 2 channels are labeled VINTAGE and MODERN. The Vintage side is inspired by rare germanium boosts like the Dallas Rangemaster. The Modern side a new +23dB gain dual JFET, very transparent, guitar signal amplifier. Our design uses a Maxim MAX1044 voltage doubling IC to get additional headroom.
If 6 were 9 ? How about if 9 volts became 18 volts!
As with all Keeley built electronics it incorporates top of the line audiophile style parts including metal film caps, resistors, silver solder!, etc...
Teflon-coated wiring leaves this unit breath-taking on the inside. Open one up for yourself! more information »
|
|
|
|
|
|
|
SKU: GS61150
Be the first on your block to have one of these babies! The TA-23 Booster is a powerful preamplifier that allows up to 22dB of full-range level boost. Gain, Tone and Output level can be adjusted independently. It has been designed for the use with an electrical guitar or bass in conjunction with a tube amplifier. It is based on discrete germanium transistor circuitry. Thus, it is not a linear device, and will always add a flavour to the sound, especially at high gain settings. more information »
|
|
|
|
|
|
|
SKU: GS61129
The Eight-0-Eight Overdrive is a faithful recreation of the original TS-808 Tube Screamer circuit and features the JRC4558D op-amp. Its overdrive circuit provides the same tone as a vintage '808, noted to provide tube like overdrive effects while retaining the guitars original tone. more information »
|
|
|
|
|
|
|
SKU: GS61065
This might be what you\'ve been looking for in an overdrive/fuzz box! The blend between the two is simply wonderful! The Fuzz Head is designed to work like Fuzz Face pedals that many players use as a LEAD BOOST. A Fuzz Face can be muddy, lacking note definition, too bassy, and lacking sustain. An overdrive sometimes doesn\'t give enough or is too smooth. In contrast, our design is transparent, has a better frequency response, and gives you that cutting edge for lead breaks. more information »
|
|
|
|
|
|
|
SKU: GS61022
The DB-1 was designed to react precisely to even the fastest of playing, while still being able to deal with strong signals such as chords. In addition, the TM-1 will retain the full spectrum of tone present in the original signal without the volume peaks and dips common to other filters. Its multiple controls (Sensitivity, Up/Down Drive, Width & Attack) allow precise adjustment to the responsiveness and degree of the effect, while its proprietary circuitry allows the DB-1 to be used for Guitar, Bass, or Keyboards with equal effectiveness and dead-on tracking. Simply put, it's more Mutron-ish than any Mutron we\'ve heard, with just the right amount of squiggle and squawk to get the party started. more information »
|
|
|
|
|
|
|
SKU: GS60984
Built to the same specifications as the original PAF humbucker, The Mule is totally unyielding in its approach to definitive tone and construction.
The coils are scatterwound by hand and offset with a differing number of turns of vintage correct 42 AWG plain enamel wire resulting in outstanding clarity and extended dynamic range. Coupled with an unpolished Alnico IV magnet the tone is seriously organic with detailed bass, fat mids, great bite and more than enough power for most applications. The solid nickel silver baseplate and cover are exact replications of the original along with the butyrate bobbins, nickel plated slugs and Fillister no.5 pole screws, maple spacers and authentic braided hook up wire all made by hand for a lifetime of use.
For a sweet and full clean tone through to harmonically rich overdrive The Mule is unstoppable, delivering the goods every time! Technical Specifications:
DC: 8.4k*.
Magnet: Alnico II or Alnico IV.
Wiring: Braided Two Conductor.
Covers: Gold or more information »
|
|
|
|
|
|
|
SKU: GS61103
This pedalboard is constructed of durable aluminum alloy, one of the strongest and lightest metals in the world. Each PEDALTRAIN frame weighs less than the same size piece of 3/4 plywood. There are no moving parts to loosen or wear out. With a durable powdercoat finish the PEDALTRAIN will last a lifetime.
A new addition to the line up for the folks who’ve been asking for a board the size of the pedaltrain-2 but have no need for a flightcase. Comes with a tough cordura gig bag with highly protective panels incorporated into the top and bottom of the case to keep those valuable pedals safe. It’s Airline Carry-on friendly too.
frame 24x12.5x2 inches / weight 4 lbs.
case 26x15x6 inches / weight 3 lbs. more information »
|
|
|
|
|
|