The Loop 5x System allows for remote control over traditional effect pedals and effect units, with Power supply. Loop X products are handmade offering customers the very best in technology and craftsmanship.
The Loop 5x allows you to remotely control five effect loops, A/B output, and it is a regulated 9volt power supply with five 300ma outputs for pedal power. Guitar players can control the unit from anywhere onstage using any length of control cable. Loop 5X keeps pedals out of harms way, with no long audio cable runs to the stage front. Shorter cable distance between instrument, effects, and your amplifier means; more tone to your amp. Using analog idea?s with modern effects is a key design element for Loop X Systems products. Its all about great tone.
Manual A/B input selector switch and tuner output for instrument change over without unplugging.
Ethernet CAT5 cable for switching, and power to the remote control.
Loop 5X uses high quality audio relays to facilitate the switching.
Five TRUE BYPASS effect loops
Relays are activated by 6 latching switches located in the controller.
There is no audio running to the control pedal.
Red power LED light is located on control pedal.
LEDs light up to indicate loop operation status.
Output B is indicated on the controller with an LED
output A is the default output; footswitch in off position.
Full analog passive routing system with no preamps or buffers.
Use any pedal, even older pedals with worn out switches.
Return to Gear Page