Our version of the classic Marshall JTM-45 amplifier, circa 1965. The JTM45 (Marshall's first amplifier) was Jim's version of Leo Fender's 5F6A Tweed Bassman amplifier. The circuits were nearly identical, but the JTM45 had a beefier power supply, and when used with KT66's & a 4x12 cab, this amp had a British voice all it's own! A glassy top end with warm & creamy midrange tones makes this amp desirable for many genres of music, especially classic rock & blues. The slower rectification from the GZ34 adds a slight sagging/smoldering quality to the tone which allows the player to really dig in and make her rip & sing! Like most 4 input Marshall style amps, you can bridge the the 2 channels for slightly more gain and control.
The kit includes a High Quality, Handmade in USA Turret Board, Mallory 150 series (or Sprague Orange Drop) Coupling Capacitors, JJ and F&T Power Supply Caps, Sprague Atom Bias Supply Caps, High Quality Carbon Comp Resistors, Alpha Potentiometers, Marshall style Knobs, Belton Sockets, Cliff Jacks, NKK Impedance Selector, Fuse Holders, Power Cord, The Classictone JTM45 style Power Transformer (40-18033), Output Transformer(40-18039), and either the 40-18059 (20H) or 40-18058 (3H) chokes. All the transformers are made in Chicago! The power transformer has multiple primaries 120/220/230/240V. The output transformer has outputs for 4, 8, & 16 ohms. We will also include all the Teflon or Cloth Push-Back Wire you need to do the job. All you need are the Chassis & Head Cabinet!!!
All Transformers are manufactured to our specifications by a Chicago Transformer company with over 50 years experience making high voltage Transformers for tube amplifiers. We are factory direct dealers and pass the savings on to you......
Transformers are warranted by the manufacturer against defects of materials & workmanship for 6 months from date of purchase. Warm up that soldering Iron!!!
Return to Gear Page