Magnatone Giveawya

September 2014
more... GearEffectsPedalboardReviewsExpressionMiscJanuary 2009IK Multimedia

IK Multimedia StompIO-1


Larger Image

Since this is a computer-based program, it’s important to review the minimum system requirements. For Windows, it’s a Pentium 1Ghz/Athlon XP 1.33 GHz, 512 MB of RAM, Windows XP/Vista or later. For Power PC Mac, it’s an 866 MHz G4, 512 MB of RAM and Mac OSX 10.4 or later. For Intel machines, it’s a 1.5 GHz Intel Core Solo processor with 512 MB of RAM, running Mac OS X 10.4.4 or later.
Have you ever thought about taking your laptop to a gig loaded up with cool guitar sounds, but couldn’t figure out how to control the setup? Well, IK Multimedia may have a solution for you. StompIO is their new USB floor controller interface that packs a lot of power and flexibility for users of Amplitube 2, Amplitube Jimi Hendrix, Ampeg SVX and Amplitube Metal. When first unpacking the unit, I was surprised at how heavy it was. I thought, “Wow, this is a lot of beef for just a floor controller!” But quickly I came to realize that it’s also a digital and analog recording interface, Class-A DI and headphone practice amp.

What you get in the box is the StompIO hardware, a 3m long USB cable, a power supply unit with interchangeable international plugs, an expression pedal with 1/4” cable and all the software installation discs. They also wisely include a printed manual for both the StompIO itself, and the X-Gear software: a nice, simple touch, considering how many companies cheap out on a hard-copy manual these days.

The Hardware
Now let’s examine the StompIO itself. It’s an attractive, black and grey metal steel enclosed unit with a useful top handle for easy carrying. Its weight gives it a sturdy feel and the foot switches all have nice, easy action. Another smart touch is that they labeled the inputs, outputs, etc. on both the top of the StompIO (so you can see them standing above it), and also above the actual connections. Again, it’s a small but important detail that pays off in the heat of the moment.

Up Top
The top of the controller features a Volume knob for the Balanced, Unbalanced and Headphone outputs, a Tuner button that instantly displays the tuner both onscreen and on the unit, and an LCD display for Patch numbers/names and editing functionality. There are three input level LED’s—orange signifies LOW, green (which should light up most of the time) shows OK, and red is for HI. Below the LCD display sit six knobs for editing, and on the right of the LCD are Enter, Exit, Next and Previous buttons.

As for the footswitches, there are ten of them. Luckily, the footswitches are spaced far enough apart for ogres like me with big feet. The first bank features the Enter, Exit and Tuner footswitches. Below these sits another row of seven: the Bank Down in Play mode, (or Page left in Edit), the Bank Up (Page right), a Tap footswitch for tempos (more on that later), and four switches (A-D) for bank selecting (Play mode) and parameter selections (Edit mode).


Larger Image

What does it control?
The rear panel of the unit features the usual power switch and DC power socket. I wouldn’t mind seeing an internal power supply instead of a “ground wart,” but that would have made it even heavier and brought on more noise possibilities. There are six external controller jacks, one of which you use up immediately with the included expression pedal. Note that you can also choose to use third-party expression or footswitch pedals. Then there are MIDI ins and outs, a USB Host Computer Connector and an S/PDIF digital out, which outputs the same signal as the stereo outputs. There’s also a headphone jack that doesn’t mute the signal for other outputs when in use.

There are left and right unbalanced outputs (-10 dBv) for use in connecting to guitar amps, as well as left and right balanced outputs (+4 dBu) for studio output, powered speakers or monitor and mixing consoles. Balanced outs are important on a unit like this because if you’re using it onstage, you can drive the cables up to 200 feet or so without degrading the signal. The Direct Out provides a clean, unprocessed instrument unbalanced signal with no separate volume control. This is the output you should use when not using the StompIO as the audio interface. Last is the Class-A mono IN, where you of course plug in your instrument.

Don’t forget that this unit uses A/D (analog to digital) conversion when plugging in, as well as D/A conversion on the output. According to IK, they have used extremely high-end components not only on the converters, but also throughout the unit.

Hooking up
The basic StompIO setup is shown below The main objective of StompIO, besides changing patches and outputting sound from the IK software, is to provide players the ability to modify any software parameter without the need for a mouse, monitor, or keyboard. However, it can also be used as an ASIO or CoreAudio class-A DI to a DAW program.

The StompIO itself features several basic modes. Play Mode is the default start up setting, which lets you step through any of the 4,000 patches (yes, you read that right). Patches run from 000 to 999 with four programs per (A thru D). When turning the unit on, it will also automatically call up the last patch you were playing—something I grew to like very much.

Selecting or switching patches is simple. Use the Bank Up/Down switches to select a preset. You’ll see the bank number change and begin flashing. Then press the footswitch (A – D) to load the chosen patch, and you’re in business. To set a Patch’s delay-based Tempo, simply hit the TAP footswitch four times (or more) at a quarter- note rate. This is a great feature to have when playing live.

Go to Page 2 for the rest of the review and rating.