- Rig Rundowns
- Premier Blogs
Using an oven mitt, lower the pickup into the hot wax, and let it soak for between one and two minutes (note the watch on the counter). We held the pickup by the wire pigtail, and the outer insulation almost melted through where it was pinched on the backing plate by the strain relief tab. We were okay this time, but next time we’ll probably use a pair of pliers to hold the pickup. Have a cooling plate ready, so you don’t get wax drops all over your kitchen counter. It takes a long time—about a half hour—for these puppies to cool down. The masking tape we put on top of the bobbins to keep the wax off lasted about 10 seconds in the pot. In the end it didn’t matter, so don’t even bother covering anything.