- Rig Rundowns
- Premier Blogs
Piestany, Slovak Republic (July 30, 2014) -- After big success of Pultronic EQ-110P, few years later we noticed there is still something missing. While EQ-110P was perfect for adding deep analog bass and treble color to your mixes, we think you still need tool that can add unique vintage color also to your mid-range.
So we opened our analog laboratory again, and after precious development, new mid-range Pultronic EQ-50M is here.
If you need to add some more presence/analog color to mid frequencies, or you are thinking your tracks sounds still empty it is right time to choose one of 6 mid range vacuum tubes.
One of know benefit of analog equalizers comparing to sterile digital EQs is that you can make some frequencies more „visible“ in mix just with adding few db of boost, example you can achieve same result (psychoacustical boost) like 2db of digital EQ by boosting only 0.5db with analog EQ, because of more color, saturation and harmonics. This can be perfect feature if your mixes are almost peaking at 0db but still has empty mid sound.
- Peak module with 6 selectable vacuum tubes: 12AX7 Tube, Classic tube, Warm tube, Class A Tube,Vintage tube , Dirty vintage tube in frequency range 400hz – 5 kHz boost and bandwidth knob.
- Dip (cut) module with frequency range 300hz – 6kHz, with boost and bandwidth knob.
- Vacuum tube drive module: with on/off switch and warmth, saturation drive, brilliance knobs for modeling sound of main (output amp) vacuum tube, to add more fatness/warm to overall sound.
- Input and Output knob volume for more/less analog drive (more input = more saturated sound)
For more information: