Louis Electric

December 2014
more... GuitarsGearSound SamplesReviewsSolidbodySolidbodyP-90-EquippedNovember 2010Godin

Godin Icon Type 3 Electric Guitar Review

A A
Godin Icon Type 3 Electric Guitar Review

Download Example 1
Neck Pickup, with High-Definition Revoicer first OFF, then ON
Download Example 2
Toggling through all 5 pickup settings, starting with Neck Pickup thru to Bridge Pickup, with High-Definition Revoicer ON
Download Example 3
Neck and Middle Pickups, with High-Definition Revoicer OFF
Download Example 4
Bridge Pickup, with High-Definition Revoicer OFF
Download Example 5
Neck Pickup, with High-Definition Revoicer first OFF, then ON
Download Example 6
Middle Pickup, with High-Definition Revoicer first OFF, then ON
Clips recorded through Paul Reed Smith 30 amp, Shure SM57 Microphone, Avid Pro Tools
Godin has always been a friend to working musicians—a company that regularly combines value, quality, and features in its guitars. Recently, the company unveiled its ICON series, a four-model group that includes numerous pickup configurations— including Seymour Duncan and Lollar options. ICON guitars have the distinction of being the first set-neck instruments in Godin’s electric line. For this review, we had the pleasure of checking out the Lollar P-90-equipped ICON Type 3.

Mahogany Marvel
The ICON Type 3 features a chambered solid mahogany body with a carved mahogany top and a 22-fret set mahogany neck with a 16"-radius ebony fretboard and a 24 ¾" scale. The Type 3 sports a Graph Tech ResoMax bridge with graphite saddles and a Graph Tech Tusq nut, and its three P-90s pickups are selected with a 5-way switch and signed on the back by Jason Lollar.

The ICON Type 3, like the other guitars in the series, feature Godin’s High Definition Revoicer (H.D.R.) system, which allows you to go from passive to active circuitry with the push of a button to change the tonal characteristic of each pickup.

Our review model came with a flawless Burgundy finish (Type 3s are also available in Natural and Black) that complimented the smooth, curvaceous body. The neck joint on this guitar is exceptionally clean and unmarred by any finish buildup. Godin achieves this bit of mojo by finishing the body and neck separately and applying a single, thin coat of finish once they are joined.

Room to Range
I had a rehearsal the same day I received the Type 3, so it was a perfect opportunity to try it out. I was especially curious about how the H.D.R. electronics would sound and operate. So I plugged into a Mesa/ Boogie Dual Rectifier with a Trace Elliot 4x12 cabinet and set up the rig for some clean, funky, syncopated rhythm playing. With the ICON Type 3, I found that the neck pickup with the H.D.R. on provided the full sound I needed, with extra brightness to cut through the band mix.

Because the H.D.R. gives you the freedom to go between active and passive, its five pickup positions yield 10 different tonal options. H.D.R. is not a booster, but it definitely gives the tone a more responsive, punchier quality. It also adds more presence and brilliance, and really brings out the percussive side of syncopated riffs. And for passages that called for a more acoustic sound, I used the middle or bridge pickups with the H.D.R. engaged to get a clearer, brighter tone.

The tone knobs on some guitars have a limited range, but the ICON Type 3’s tone knob has an exceptionally wide range and sounds better than I’ve heard on many more expensive guitars. I found that if I was playing with the H.D.R. on and the guitar sounded too bright, I could roll back the tone slightly for a nice balance of clarity and fullness.
A A