- Rig Rundowns
- Premier Blogs
Most guitarists who use hybrid picking shift between a full-on flatpick and a pick-and-fingers approach on the fly. While this offers a huge timbral palette, it can be tough to balance the big, chimey sound of strummed five- and six-string chords with the thinner tone of plucked three-string chords. One way to beef up the latter is to use special three-note voicings that are spread out across a wider range than the typical triads you might otherwise grab. It’s easy to generate “hybrid-friendly” chords, once you know the process.
We’ll begin by modifying standard root-3rd-5th triads, which always occupy a single octave. To make these triads sound bigger, we simply move the middle note—the 3rd (or in the case of a minor triad, the b3rd)—down or up an octave, while leaving the root and 5th in the same register. In this lesson, we’ll discover what happens when we drop the 3rd an octave lower. Next time around, we’ll focus on raising the 3rd one octave higher. Either way, the resulting open triads span more than an octave.
Download Example Audio 1...
Fig. 1 illustrates the process, beginning with a root-3rd-5th A triad in the 5th position. First, strum A on strings 4, 3, and 2 as written. Next, using hybrid picking, pluck the A/C#—the second chord in our example. Musically, only one thing has changed: We’ve dropped the middle note, our 3 (C#), down an octave. But to fret this new chord, we’ve had to refinger the voicing. In this instance, the root migrates from the 4th to the 3rd string. Though the root has moved, its pitch hasn’t changed.
Incidentally, when a chord’s lowest note is not the root, the harmony is typically written as a slash chord with the chord name on the left and the special bass note on the right. Most slash chords have the 3rd (or b3rd) in the bass, but the 5th and other chord tones can show up here too. (You can even have nonchord tones in the bass, but that’s a topic for another column.)
Now, repeat the process for the second pair of chords in this example, Am and Am/C. Here, we’re pulling the b3rd (C) from inside Am and dropping it down an octave. As you play both chords, listen carefully and compare their relative sonic “weight.” With its expanded range, Am/C sounds bigger than its more compact sibling, although without the root as the lowest note, it can also sound more ambiguous. It’s good to keep these qualities in mind when arranging music with slash chords.
Pushing on, we tackle E and Em, pulling out G# and G (the 3rd and b3rd, respectively) and dropping them an octave to create E/G# and Em/G voicings.
Fig. 2 gives us an alternative visual perspective on the four new voicings we’ve created. We can clearly see that the only difference between A/C# and Am/C, or E/G# and Em/G is the half-step shift that results from moving the 3rd to the b3rd. Perhaps you’ve played these chords before. If not, take a minute to chase them up and down the fretboard, and then hop back and forth between the grips on string sets 5–3–2 and 6–4–3.
Download Example Audio 2...
Now, let’s put our chords to work. Fig. 3 contains strummed four- and five-note chords (A2, D2, and the Aadd2 at the end), as well as plucked three-note voicings. Pay attention to the picking-hand markings for A/C#, D/F#, and G2. In bar 3, we get a piano-like effect by simultaneously plucking the notes in G2 and D/F#. It’s a sound you can’t get using a flatpick alone. As you play through this example, notice the variety of picking-hand textures: full strums, arpeggios, and piano stabs. Also, in bars 1 and 2, notice how the lowest note in each slash chord lies a half-step below the root of the subsequent chord and how strongly one leads to the other.
Download Example Audio 3...
Fig. 4 consists entirely of hybrid-friendly slash chords voiced on strings 6, 4, and 3. To accentuate the root in any of these chords, simply yank the 4th string a little harder—that will do the trick. Try this progression with some slow flanging or modulated delay.
Download Example Audio 4...
In this lesson, we’ve created new voicings by dropping the middle note of a root-3rd-5th triad down an octave. Next month, we’ll see what happens when we push the middle note up an octave. Meanwhile, use these chords to create some progressions of your own.