- Rig Rundowns
- Premier Blogs
|Download Example 1
Funky, fast then slow
|Download Example 2
Strat, fast then slow
|Clips recorded with a Fender Twin Reverb combo reissue and a 2008 Fender American Statocaster.|
Since the ’70s, players have more often opted for choruses, phasers, and digital modulation pedals to replicate of sound of the heavy, expensive, and hard-to-maintain rotary speakers. But even the best modulation pedals have a hard time replicating the unmistakable sound of a spinning speaker and well-placed microphones that are responsible for the best rotary sounds. Enter the Lex, a new rotary speaker simulator from the brain trust at Strymon Effects. The Lex nails a host of rotary speaker tone, but it also delivers a lot of the response and feel of playing one in impressive fashion.
Where Do They Get These Wonderful Toys?
Like many of the pedals in the Strymon line, the Lex has a smorgasbord of features and frills that almost border on the obsessive. The aim was to emulate every aspect a rotary speaker cabinet, including all of the sonic nuances of different microphone configurations, and the number of sounds on tap is amazing, Strymon’s impressive 24-bit SHARC DSP system really flexes its muscles in this new example, modeling the mechanical aspects of rotary speaker function, and the sonic signatures of the amplifiers and speakers themselves. There are analog input and output circuits to help warm up the tone of the emulation further. And it can be used in either mono mode, or in a super-spacious stereo mode that can be bi-amped.
Strymon’s ability to nestle so many tweakable parameters within such a simple, no fuss interface is remarkable. The front panel of the chocolate-colored enclosure features four knobs, each with a primary and secondary function. Pressing both of the footswitches at the bottom of the pedal at the same time provides access to the secondary functions, which can take some clever footwork but gets easy with a little care and practice.
The first of these controls, the Slow/Fast footswitch is one of the most useful and effective. It’s a quick way to move between the Lex’s two basic speeds—a fast, bouncy swirl like the tone of the lead melody in Soundgarden’s “Black Hole Sun” or Tom Petty’s “You Don’t Know How it Feels” and a slow, phasing pulse like the intro to Pink Floyd’s “Breathe.”
The Mic Distance knob adjusts the intensity of the rotary effect—approximating the effect that a sound engineer can get with different microphone positions. On a Leslie, for example, a microphone is normally placed on the lower rotor (the drum, which handles the low end) and the other on the higher rotor (the horn, which handles the high end). Needless to say, the variations and possibilities are endless, and the Strymon covers a lot of them. The Lex approximates this effect in stereo mode, and by selecting bi-amp mode, each output jack effectively becomes its own rotor—the sound of which can then be modified by adjusting the Mic Distance knob. The closer the mic is placed to the rotor, the louder and more intense the effect gets for a given rotor. Pull the mic further away (in the figurative sense) and the effect becomes more even and smooth. You can also choose between mic’ing either the front or back of the cabinet, which changes the phase pattern, in the secondary function mode.
The Lex’s emulated preamp can be overdriven via the Preamp Drive knob, and either boosted or cut by 6 dB in its secondary function. The high end of the effect can be adjusted by moving the Horn Level knob, and the acceleration time between each rotation can be altered when the pedal is placed in its secondary mode. If there weren’t control and tone variations enough, each of the four front panel controls can also be controlled with an expression pedal and altered in real-time.