Bass Bench: Introducing the Headless Bass
Ned Steinberger and his creation. Photos courtesy steinberger.com
Someone recently posted a photo of a headless bass in a forum. Yes, that frequently happens, but what was surprising this time was the reaction of an obviously younger bassist. He vigorously complained that the thread opener had posted a photo of an “incomplete or broken instrument.” I’m sure we’re all used to encountering a high degree of ignorance when surfing the net—and particularly when accessing these “open-to-all” areas—but apparently this guy had never seen a headless instrument.
No bassist should be surprised if the general public doesn’t get it, but a player should at least have an interest in the various flavors of our instrument. Especially when you consider there aren’t that many flavors in the bass world to begin with. It’s reason enough, I’d say, to revisit the design that kicked off one of the most adventurous periods of our instrument’s history.
Flashback. Born in the 1930s, the electric bass became popular in the ’50s when the Precision hit the stage. After laying the foundation for rock in the late ’60s and throughout the ’70s, the electric bass finally encountered its wildest and most experimental era.Prior to that,countless manufacturers had offered variations of the initial design—different woods, colors, pickups, body shapes, and materials—so builders and players must have thought they’d seen it all.
That is until 1979, when a young Ned Steinberger popped up and revealed a radically different concept and construction: the headless bass. (And yes, we got it before guitarists!)
Not only did he swap out all the wood for a two-part graphite build consisting of a one-pieced body and neck, plus a faceplate, he also changed the arrangement and functionality of some key elements. By using a body-based tuning system, Ned managed to get rid of the entire headstock. The silhouette of this bass differed so dramatically from typical models that even non-musicians could easily recognize it. Because ignorance is not an invention of our time, it must have been hard to get the word out to players and, more importantly in those pre-internet days, retailers.
The Steinberger makes its debut. A few years ago at the Frankfurt Musikmesse, I had the opportunity to get an extended, highly entertaining history lesson from Hap Kuffner, a New York shop owner and later associate at Steinberger Sound. Hap was so impressed by his first meeting with Ned that he still remembers the encounter decades later.
The two main elements of a headless instrument: the bridge and headpiece.
That fateful day, a young guy entered his store. After playing a few notes on a futuristic-looking instrument, he unstrapped it and smashed it on the floor. He then picked it up and began playing again to demonstrate that it was still in tune.
Over the next few years, Ned and Hap reenacted this scenario many times to show off the Steinberger’s superior durability and tuning stability. This move illustrates one of the advantages of the basic material and construction, but there are others.
The headless concept was quite successful for almost a decade, but as we know today, the vast majority of players could never be convinced to go for it, most likely for one reason: its unusual looks! The openly experimental ’80s were surely the best era to host the headless bass. Had it been introduced today—an age dominated by selfies and publicly displayed ignorance—chances are we’d have missed its many practical advantages.
That’s why it’s good to see the concept regaining attention. In the world of musical instruments, there are several perennial, unresolved debates: tube versus solid-state amps, active versus passive electronics, wood or graphite construction, set neck, bolt-on, or neck-through designs, etc. All those technologies have their pros and cons, but in the case of headless construction, the concept really has all the arguments on its side. In fact, the arguments are so compelling that we’ll take a detailed look at them next time.