Louis Electric

November issue is here!

DIY

Time for New Bridge Pins?

May 11, 2013
Okay, you’re restringing your acoustic guitar and discover that a bridge pin is stuck. Now what? It could be time for new bridge pins or this could signal problems with
Read More

Import Tuning: 3 Simple Ways to Upgrade Your Strat

April 15, 2013
Replacing key components—such as the pickups, string nut, and tuners—can turn a workhorse guitar into a killer axe!
Read More

Bringing a Supro 1x10 Out of the Closet

April 15, 2013
Because of the amp’s age, should I remove all the caps and put them on a tester before attempting to power it up?
Read More

DIY: How to Convert Your Electric Guitar to a Baritone

March 27, 2013

In this step-by-step tutorial, Nashville guitar tech John LeVan demonstrates how to convert an electric guitar with a bolt-on neck into a growling baritone. He also offers valuable tips on installing tuners, adjusting a truss rod, filing nut slots, balancing pickup output, and setting intonation.

Also see our photo and text tutorial here.


Read More

Help for an Ailing Univox U1040

March 11, 2013
A local shop got it to pass signal and technically function, but with four power tubes, some big-bruiser transformers, and a rating of 105 watts, I was expecting more.
Read More

The Two-Pickup Esquire Wiring

March 11, 2013
Also called the “Broadcaster blend circuit,” this wiring is the transition circuit between the single-pickup Esquire and the Telecaster with its well-known dual-pickup configuration.
Read More

The B-String Extender Myth

March 11, 2013
While adding higher-pitched strings to a bass was a no-brainer, the low B often caused problems.
Read More

Build Your Own Series Resistance Box

March 11, 2013
Here’s a super-simple device that will let you coax new sounds from your fuzz pedal.
Read More

PRS Makeover: Blasphemy or Alchemy?

February 4, 2013
A longtime Premier Guitar fan scores an autograph-laden ''80s CE and struggles with the dilemma of keeping it all-original or having the PRS Technical Center update it to current specs.
Read More

The Ultra-Flexible Esquire Wiring, PT. 2

February 4, 2013
Last month, we began a special project: We wanted to squeeze as many useable sounds as possible from a single-pickup Esquire [“The Ultra-flexible Esquire Wiring, Pt. 1,” February 2013]. And
Read More