|
Filter:
|
|
|
The Schecter Omen Extreme-5 5-string bass guitar blends fantastic warm tone and jaw-dropping looks. more information »
|
|
|
|
|
|
|
|
|
With amazing audio performance and road-proven durability, the QSC RMX 5050 5,000 Watt Power Amp is suited for a wide range of sound reinforcement applications. Features a 3-tier, Class H design. Extremely efficient at real world power levels. Less AC current is wasted and more goes into producing useful audio power. Uses the best available components. Features balanced 1/4" TRS, XLR, and barrier strip inputs, binding posts and Neutrik Speakon outputs, front-mounted gain controls, plus signal and clip LED indicators to monitor performance. With high-current toroidal transformers for greater 2-ohm power and low noise.Independent user-defeatable clip limiters reduce distortion.Selectable low-frequency filters (30Hz or 50Hz) protect speakers and increase headroom.Balanced 1/4" (6.3 mm) TRS, XLR, and barrier strip inputs for maximum flexibility.Binding post and Neutrik Speakon outputs.Has front-mounted gain controls for easy access.Signal and Clip LED indicators to monitor performance3-year warranty. ACCESSORIES STEREO MODE, Both Channels Driven 8 ohms FTC 20 Hz-20 kHz 0.1% THD 1050 Watts 4 ohms FTC 20 Hz-20 kHz 0.1% THD 1600 Watts 2 ohms FTC 20 Hz-20 kHz 0.1% THD 2000 Watts 8 ohms EIA 1 kHz 0.1% THD 1100 Watts 4 ohms EIA 1 kHz 0.1% THD 1800 Watts 2 ohms EIA 1 kHz 1% THD 2500 Watts BRIDGE-MONO MODE 8 ohms FTC 20 Hz-20 kHz 0.1% THD 3200 Watts 8 ohms EIA 1 kHz 0.1% THD 3600 Watts 4 ohms EIA 1 kHz 1% THD 5000 Watts Distortion (SMPTE-IM) Less than 0.02% Distortion (Typical) 20Hz-20kHz: 10dB below rated power 1kHz and below: full rated power Less than 0.02% Less than 0.02% Frequency Response 20Hz to 20kHz, 8 ohms, LF filter bypassed, +0/-1dB 5 Hz to 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB Damping Factor Greater than 250 @ 8 ohm Noise (unweighted) 100 dB below rated output (20 Hz to 20 kHz, 8 ohm load) Input Sensitivity 1.42 Vrms for 1050 watts into 8 ohmsNOTE: The RMX 5050 requires 20A 120V service and is supplied with a NEMA 5-20 plug on the cordset. more information »
|
|
|
|
|
|
|
|
|
SKU: GS2375597
NUC21347 The Aero Uke was originally built by the Harmony Co. to commemorate Lindbergh's 1927 transatlantic flight. This fine replica from the hands of master luthier Marc Schoenberger captures the fanciful look of the original but is greatly improved in tone, playability and workmanship. Each of Marc’ s ukes is hand crafted and the tops are “tap†tuned to give his instruments a loud an balanced voice. The Aero Uke is made with one piece mahogany body, a mahogany neck and a spruce top. The prop is hand turned from Brazilian mahogany and the propellors are turned from teak. The fingerboard and tail fin are made from rosewood. Each of these special instruments is signed and dated by the artist. A cast bronze landing gear stand is available for an additional charge. more information »
|
|
|
|
|
|
 |
SKU: GS4873
I love these guitars. This 8.75 condition '54 Gold Top is everything you'd ever want in an old Les Paul. Lightweight, great neck, wonderful tone. Plays as good as it looks. Ships in OHSC
Reference# GLPGT8001 more information »
|
|
|
|
|
|
|
SKU: GS872288
These cables which feature gold end connectors are ideal for short patchcord usage. more information »
|
|
|
|
|
|
|
SKU: GS40896
1972 Univox Deluxe LP Flametop. w/ OHSC all original beautiful set up, nice warm tone. Solid mahogany w/ a beautifully flamed maple cap. These instruments have gone up steadily every year. Great investment, or just play it man! more information »
|
|
|
|
|
|
|
SKU: GS16588
Its Clean sounds are rich and well defined. The Reverb, a classic long scale Accutronics tank, is bright, open and has generous depth. The tone control is very responsive, giving you a wide pallet of sounds on both channels. A NEW feature is our choise of "Normal and Bright Clean" inputs. The "Bright Clean" input, specially designed for use of humbucker pick-ups, is slightly trimmed and excessive mids are filtered out leaving a wonderful, well balanced, clean tone. The Overdrive channel is not affected by this filter. This channel, with its dual gain control, offers everything from an edgy clean with a nice sustain and moderate distortion to an exciting crunch. Moving further up the scale you will find pure saturation with infinite sustain, this is high-gain rockers paradise.
2-Channels: Clean and Overdrive
4x 12AX7 and 2x EL34 tubes
Serial FX-loop
Solo / Rhythm facility
Accutronics spring reverb
Koch VG12-90 speaker (Combo)
Built in Power Soak (0, 25 or 50 Watts output power)
Recording output
Headphones output
2-way footswitch included
more information »
|
|
|
|
|
|
|
The 707 is a dual-coil pickup with alnico poles similar to the 85, and the same amount of output. Housed in EMG's 35 Extended bass housing, it's not a direct replacement for a humbucking pickup. Includes Quik-Connect cable, prewired split shaft volume/ton more information »
|
|
|
|
|
|
|
|
|
|
|
SKU: GS838367
Want to to home-brew your own Fender Deluxe type Guitar Amplifier or another similar Push-Pull Design, then this is the bundle for You!! Bundle includes our Deluxe MAG-6452 Power Transformer, TF-110 Paper Bobbin Output Transformer, & 22707 Choke.
Power Transformer Specs: This is the same electrically & dimensionally as a regular Tweed Deluxe transformer. Primary 117VAC 60 Hz, Secondaries 660V (330-0-330V) at 100 ma, 5 volt at 2 amps, 6.3 volts center tapped at 1.65 amps.
Output Specs: TF-110-4816-UL (replaces Fender p/n 041318) is a bolt-in, no drilling required, replacement output transformer for Fender Deluxe (blackface or silverface), also fits many other amplifiers using 6V6, 6BQ5,EL84, 7189, and 6CZ5, also lower powered (25W or less) amps with 6L6, 7591 or 7868..dropin replacement for most vintage Ampeg Jet & Reverborocket and some Silvertones. This type of transformer is typically used with push pull amplifiers with tube types such as 6BQ5/EL84, 6V6-GT, 6AQ5, 6BM8/ECL82, 6973, etc,
Chokes and transformers are warranteed by the manufacturer against defects of materials & workmanship for 6 months from date of purchase.
Choke Specs: Rated 4 henries at 40 ma DC. 150 ohms DC resistance (+-5%), 2500 volt DC factory hipot tested
Compare our price for these items to those offered elsewhere. And ours are hot off the assembly line right here in Chicago, made by folks with over 50 years experience making high-voltage transformers & chokes for tube amplifiers. We are Factory Direct Dealers and pass the savings on to you...
Get Yer Build on... TriodeElectronics.com
more information »
|
|
|
|
|
|
|
|
|