| Results For: | Gear Type: Amp Parts
Gear Type: Amps
|  |
Filter:
 |
SKU: GS1874235
Black covering with a silver grill, 1x12" Celestion 80 watt speaker, 8 ohms, closed back. Includes nylon cover and speaker patch cable. Available for a limited time only and in other matching Fender colors too. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS1872887
Two channel, clean and overdrive, 3 band EQ, uses Marshall's FDD technology for added depth, single 8" speaker, CD in and emulated line out, emulated headphone jack. (Amplification Equipment) more information »
|
|
|
|
|
|
|
|
|
SKU: GS2346927
Silver covering with black grill cloth. Limited production. Includes the MG IV Series MG100HFX head and matching MG IV Series 4x12 cabinet. 100 watt amp head, 4 storable channels (clean, crunch, overdrive 1 and overdrive 2), gain, bass, middle, treble, reverb, volume, FX (phaser, chorus and flanger), delay and master controls; reverb on/off, FX on/off, external FX on/off, tap tempo, damping and preset storage function switches; MP3 input, FX loop, headphone out and footswitch jacks (4 button Stompware footswitch not included). Angled 120 watt cabinet with 4 specially voiced 12" Celestion speakers. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS833985
Transformer Bundle w/ Choke for Marshall(tm) 100W JMP Plexi & JCM 800 Amplifiers. Build your own Legend or Swap yours with these, and save the originals, so they dont get blown on the road. New Production Made in "Sweet Home Chicago" U.S.A. by a company thats been making High Voltage Transformers and Chokes for over 50 years. We are Factory Direct Dealers and pass the savings on to you.
Output Specs: 3.6K/3600ohms Primary. 4, 8, & 16 ohm speaker taps. Dimensions: Measures 3-3/4 inches high by 3-1/8 inches wide by 3-5/16 inches deep over end bells. Mounting hole bolt pattern is 2-1/2 inches by 2-1/2 inches.
Power Specs: 350V CT @ 290mA. 6.3V CT @ 7A. 120/220/240 Primary. Dimensions: Measures 4-17/32 inches high by 3-3/4 inches wide by 4-3/16 inches deep over end bells. Mounting hole bolt pattern is 3-1/4 inches by 3-1/8 inches.
Choke Specs: core measures 2 1/4 inch wide X 2 5/8 tall X 2 1/4 inch deep over the covers. Mounting centers are 1 3/4 inch x 1 5/8 inch apart. Rated 5 henries at 120mA DC. 115 ohms DC resistance (+-5%), 2500 volt DC factory hipot tested.
Chokes and transformers are warranteed by the manufacturer against defects of materials & workmanship for 6 months from date of purchase.
Git Yer Build On...For More Transformers, Tubes, and Parts.. Check Out TriodeElectronics.com
more information »
|
|
|
|
|
|
|
SKU: GS832980
DIY Build or Rebuild Kit for a Blackface AA764 Fender Vibro Champ Amplifier. Your little Champ will sound better than ever before, and provide years of reliable service. The kit includes a hand built, turret board, High Quality Carbon Comp Resistors, and Sprague Orange Drop or Mallory 150 Series capacitors, our 5F2 champ power transformer, TF103 Output Transformer, Replacement Filter Capacitor, two 8 pin belton sockets (6V6,5Y3), two 9 pin socket (12AX7 x 2), two 250k potentiometers (Tone Controls), one 1M potentiometer (Volume Control), one 3M potentiometer (Vibrato Speed), one 25K potentiometer (Vibrato Intensity), Jacks, Switch, Fuse Holder, Lamp Holder & Jewel, & Power Cord. The kit also offers some flexibility for those who aren't afraid of experimenting. The Filter cap is a 40-20-20-20 @525V so you could try some different power supply filtering configurations by parralelling two sections for a single 60uF. The output transformer Has outputs for 4 and 8 ohms as well as ultra linear taps aka Dr. Z amps, if you wish to use them. We will also throw in enough wire to do the job. Tear the guts out of that solid state combo and build this inside. Great for DIY Builds. All you need is a Chassis, Cabinet, & Speaker!!!
All Transformers are manufactured to our specifications by a Chicago Transformer company with over 50 years experience making high voltage Transformers for tube amplifiers.
Transformers are warrantied by the manufacturer against defects of materials & workmanship for 6 months from date of purchase. Get the iron hot.
Also includes A copy of the Original Fender Schematic, Layout, & Wiring Diagrams for our transformers. more information »
|
|
|
|
|
|
|
SKU: GS1875599
Black textured vinyl covering, 4 12" specially designed Celestion G12EVH speakers, premium birch-ply construction with a removable back panel. 100 watt capability, 16 ohms and includes pop-out swivel casters. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS17001
Tone Tubby Ceramic 10" 8 or 16-ohm 40-watts speaker, with the standard H1E Hempcone! The 10" Ceramic Tone Tubby speakers are hot off the production line! With the exact same voice coil and similar magnet as its big brother, the Ceramic 12", this is a BIG sounding speaker in a small 10" package! The Tone Tubby Ceramic 10 offers an amazing range of tone, throughout the entire guitar frequency range. More overall lows, mids and highs, with NO "cone cry" or "ice pick highs". Classic ceramic magnet speaker clarity and definition, with later, smooth breakup, more clean headroom, and slightly more bright frequencies than its AlNiCo 10 counterpart. This amazing speaker provides a smooth and warm tone, with fat, silky and thick overdrive without any harsh high end. Compared to several other 10" speakers, I've tested it against, it has a tighter bottom end, bigger mid-range and sweeter, smoother top end. Ideal for both closed back or open back cabinets. Tone Tubby is the first "new" line of speakers, that we have tested in many years, that has just plain "knocked us out"!
Available in 8-ohm and 16-ohm impedance. more information »
|
|
|
|
|
|
|
SKU: GS1872750
Tweed covered with oxblood grille cloth, 60 watts, all tube, two footswitchable channels, 4X10" Special Design Eminence speaker, reverb, includes footswitch and cover, effects loop, external speaker jack. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS16998
Tone Tubby AlNiCo 12" 8 or 16-ohm 40-watts speaker, with the standard H1E Hempcone. Called "The most significant development in speaker design for decades", by David Wilson at ToneQuest Magazine. The Tone Tubby AlNiCo 12 offers an amazing range of tone, in the guitar frequency range. More overall lows, mids and highs, with NO "cone cry" or "ice pick highs". A smooth and warm tone, with a mid-range airiness and fat, silky and thick overdrive without any harsh high end and NO beyond-the-limits "farting out" that tends to plague other low-wattage AlNiCo speakers. In an open back cabinet, the mid-range airiness provides the most 3-dimensional tone, when compared to the other dozen speakers we have side-by-side in demo cabinets. This is the first "new" line of speakers, that we have tested in many years, that has just plain "knocked us out"!
Available in 8-ohm and 16-ohm impedance. more information »
|
|
|
|
|
|
|
SKU: GS1874112
60 watt bass amp with one 12" speaker, four band EQ, volume, closed back enclosure, black metal grille, red "stage light" in the port, 22.5" x 18.75" x 12.25", 46 lbs. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS1872901
A variation on the hugely popular MicroCube, the RX model has four 4" speakers and delivers some serious punch in true stereo! Ultra-compact size with carrying strap, eight COSM amps, six digital effects, 3-band EQ, and chromatic tuner built-in; "Rhythm Guide" function for practical rhythm training; stereo aux input for CD/MP3 player; phones/recording output jack; battery powered (6 x AA for ~13 hours of continuous work, batteries not included), power supply included. (Amplification Equipment) more information »
|
|
|
|
|
|
|
|
|
SKU: GS1874108
100 watts, Fender Special Design 15" speaker and piezo horn, red stage light in the port, Delta Comp Adaptive Compression Circuitry, four band EQ with mid-scoop button, XLR line out jack with level control and ground lift, auxiliary tape/CD/drum-machine input, headphone jack, FX loop, black carpet covering, and a black metal grille, 25" x 21" x 13", 60 lbs. (Amplification Equipment) more information »
|
|
|
|
|
|
|
SKU: GS2347355
Stereo 120 watt (60 per side) 2x10 combo, over 500 presets, 16 amp models. 7 smart control effects (up to 3 simultaneous) including tape echo, standard delay, sweep echo, chorus/flanger, phaser, trem & reverb. Improved effects editing with better sounds, 4 user programmable channels, larger LCD display with improved menu navigation, built in tuner, CD/MP3 input jack, headphone/direct out for practice or recording, and a footswitch jack compatible with the Line 6 FBV2, FBV Express, and FBV Shortboard foot controller. (Amplification Equipment) more information »
|
|
|
|
|
|
|