| Results For: | Gear Type: Bass Amps
Gear Type: Amps
|  |
Filter:
|
The ABM 410T is a 600W, 4-ohm bass cabinet with 4 - 10" Ashdown BlueLine drivers and a tweeter.The precision-tuned, birch plywood cabinet is protected by a tough, buffalo leather cloth covering and chromed metal corners. Special Ashdown-designed metal handles are used in favor of inferior flip handles, which can rattle after years of use.Ashdown BlueLine speakers are designed to achieve a superb balance of power; transparency; and deep, controlled low end without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound. more information »
|
|
|
|
|
|
|
Essential whenever or wherever you're unable to crank full performance volume and tone. The concept is simple. A speaker is mounted in a completely closed, hinged cabinet with a microphone suspended inside. The cab has 1/4" in and outs, as well as a mic out to the mixing console. For recording, Isolation lets you record your amp full out, reflecting your true tone without waking the neighbors or inspiring visits from the cops. 10" Eminence Pro speaker. 18"W x 18"H x 31.5"D. more information »
|
|
|
|
|
|
|
|
|
The Schroeder 610 Light Bass Cab is designed for medium and larger outdoor venues. Its compact design can replace larger models with ease by providing a defined earth-shattering sound with punchy lows and clean mids and highs. more information »
|
|
|
|
|
|
|
The Markbass Standard 102HF bass speaker cabinet is recommended for bass players who need a smaller pro-sounding rig. For those who like to combine cabinets, add a 102HF to a Markbass Standard 151HF for even more impact. Using 2 102HF bass cabs together works beautifully with a stereo power amp. Rated at 400W RMS, the small Standard 102HF cab packs an impressive punch for its size. The 102HF bass speaker cabinet features stylish woofers designed as part of a collaboration between Markbass and B&C Speakers. more information »
|
|
|
|
|
|
|
The Gallien-Krueger Neo 410 is a bass speaker cabinet that offers you high-powered performance without breaking your back during transport. Part of G-K's Neo Series speaker cabinets, at the Neo 410 cab's core are 4 10" GK Paragon cast-frame Neodymium loudspeakers. The speakers maintain high power output while producing silky-smooth natural tone with consistent response from top to bottom. And they've been designed with reduced weight for your gigging convenience. Removable casters help you move the cab easily. The Neo410 speaker cab provides plenty of definition in the highs and mids with an abundance of fat, punchy low end. This bass cab may be used in standard full-range operation or with GK's innovative Horn Bi-Amp System. Special chambering and bracing have been incorporated in the cabinet design to eliminate standing waves so that nothing gets in the way of your performance. Other features include a high-quality horn, black Tolex covering, recessed spring-loaded handles, rugged steel grille, custom interlocking corners and 11-ply poplar construction. more information »
|
|
|
|
|
|
|
Designed in collaboration with Italian Markbass artist Faso, the TSA500 bass amp head allows you to blend a tube preamp with a solid state preamp and offers such extra features as a headphone output and an AUX XLR out. It's a practical and versatile option for any bassist. more information »
|
|
|
|
|
|
|
An ultracompact and light bass head loaded with useful features for the player who demands clout and versatility without fuss. Has superb dynamics and consistent quality throughout the entire frequency range, from the lowest sub-bass to the highest treble timbres. It's loaded with a compressor/limiter, powerful 4-band EQ,tube and speaker simulator, bright filter, an overdrive stage and a powerful accelerated 350W MOSFET power amp with a highly efficient cooling system. Other pro features: erial and parallel effects loop, floating balanced XLR output, speaker simulator, and 9V phantom power. more information »
|
|
|
|
|
|
|
The 412 Light Bass Cab from Schroeder was designed for the touring musician who prefers serious tight low end without compromising on clarity. more information »
|
|
|
|
|
|
|
MarkBass took the state-of-the-art F1 and found a way to cram more features into the same tiny, featherweight package. With the Markbass F500 bass amp head, you get mute control, pre/post EQ switch for the XLR out, semi-parametric mids, and line out level control. The Markbass F 500 head offers great sound, power, and flexibility in the palm of your hand. more information »
|
|
|
|
|
|
|
SKU: B-50
•Sundown 50 Watt 1x10" Kickback Bass Combo
•Dual 1/4" inputs high / low
•Eminence 10" speaker
•Illuminated Controls
•4-band EQ
•Level Control
•RCA Inputs (for tape/CD)
•Headphone Out
•Tour Grade Metal Grill
•Tuned Ports
•XLR balanced line out
MSRP $259.00 more information »
|
|
|
|
|
|
|
Tired of the limited performance of 4x10 bass cabinets? ISP Technologies has taken a different approach to the modern bass guitar system. Combining the low frequency extension that only an 18" driver can achieve with the natural, extended (but not brittle) highs of dual 8" drivers, the Bass Vector speaker cab achieves a balance of depth, impact, and definition that makes 4x10's sound lifeless by comparison. At low frequencies, a single Bass Vector exceeds the output of a typical 4x10 cabinet by 4dB or more at 40 Hz.A single powered cabinet delivers 600W RMS to it's speakers. When an additional passive cabinet is connected, the amplifier delivers a total of 1000 watt RMS to the two cabinets. The total system power can be further increased by adding additional active and passive cabinets with a limit of 1 passive cab per active cab.The ISP Beta Bass Preamplifier is the ideal head' for the system, or the active cabinet can be used with other bass heads when driven from their line output, and the passive cabinet can be driven from virtually any powered bass head.The high performance 18" driver is complemented by an advanced speaker cabinet design featuring optimum volume and a large, deep tuned port. This helps to minimize the non-linear behavior and reduced low frequency output that small ports produce. The ISP Bass Vector is tour grade, with Baltic Birch plywood construction, dadoed joints, extremely durable rubberized polyurethane finish, metal handles, and casters. more information »
|
|
|
|
|
|
|
The Deep End DE200HD is a fan-cooled, 200-watt RMS amplifier with the necessary power and headroom to excel in a wide range of environments. Housed in a double rack-mount head format, it provides a 6-Band Active EQ, Preamp Gain and Volume controls, a built-in Limiter, an Effects Loop with Send and Return jacks and a Line Out jack. more information »
|
|
|
|
|
|
 |
SKU: GS3044260
Ampeg SVT450H Bass Amplifier Head
Expanded power amp section for more headroom with classic tube feel.
Authentic vintage Ampeg tube sound with the Classic series look. 450W MOSFET output provides the most tube-like feel of any amp in its class. Optocoupler limiter circuit maximizes clean acoustic output and crunches a little when defeated. 3-band EQ plus 9-band graphic EQ. Pre/post EQ XLR line out, line out level select, input pad, variable speed fan.
Features:
Vintage Ampeg tube sound
450W MOSFET output
Defeatable optocoupler limiter
Pre/post EQ XLR line out
Line out level select
Variable-speed fan
3-band EQ
9-band graphic EQ
Peak LED indicator
24"W x 11-1/2"H x 13"D
44 lbs.
more information »
|
|
|
|
|
|
|
The Fender TB-600 Bass Amp Head delivers 600W at 4 ohms and is based on the TBP-1 tube bass preamp. The key to the TB-600 bass amp head's smooth tone-shaping is a passive tone stack, the backbone of the classic Fender sound. The tone stack is interactive: each knob affects the others to create big, warm notes. With the Fender TB-600 Bass Amp Head you get a true representation of the natural sound of whatever bass you play. Fender TB bass amps are created for professional players looking for large, true, and balanced tone that sits fat in their live or studio mix. more information »
|
|
|
|
|
|
|