|
SKU: GS510765
LOADED WITH 8ohm VINTAGE 30 SPEAKER!!!
The NEW Port City Wave Cabinet is truly a breakthrough in amplifier cabinet construction and design. This patented design is truly something special. The Port City Wave cabinet is constructed with a 5-inch wide, 45-degree angle sound deflecting rear panel. This panel is dadoed on both sides of the cabinet for ultimate support. Internal sound waves are projected from the back of the speaker down to the bottom of the cabinet where another 45-degree panel projects sound waves towards the front. A 1 1/8 inch angled port runs the width of the cabinet and projects these sound waves out towards you. You can hear the sound normally "lost" inside your cabinet. This design results in a much more responsive and louder cabinet. The tone produced from the Wave cabinet is smooth, even, focused and clear. The Wave cabinet is NOT a detuned cab. It is not designed to boost or cut any certain frequencies. It is designed to harness all the sound your speaker produces. The 1x12 OS Wave cabinet can match most 2x12 cabinets in its volume and depth. When you dig into a bend or chord on your guitar you can hear and feel the difference.
The 1x12 Wave OS is a slightly bigger version than the regular 1x12 Wave. It is the exact width of our Dual Fifty amplifier. The 22 inch width will allow many heads to rest on the top of the cabinet without the heads over hanging. more information »
|
|
|
|
|
|
|
|
|
|
|
SKU: GS64162
The larger size Bogner 2x12 in a Closed Back design. The increased internal cabinet volume, results in an unparalleled hugeness in sound. These easily transported beauties rival most 4x12's in sound coverage. Dimensions & Weight: 25 3/4" height x 29 3/4" width x 11 7/8" depth, 79 pounds. Please contact us at sales@supersoundmusic.com or at (760)739-9099 for more info. more information »
|
|
|
|
|
|
|
SKU: GS991939
2X12 EXTENSION CABINET/(1)CELESTION G-12H 30 (1) CELESTION VINTAGE 30/8 OHMS/BLACK TOLEX W/SALT AND PEPPER GRILL (314)781-7500 more information »
|
|
|
|
|
|
|
|
|
SKU: GS59235
Gallien-Krueger 2-12 cab loaded with Celestion G12M-70's in black speakercab carpet,black metal grille,interlocking corners.8 ohm. more information »
|
|
|
|
|
|
 |
SKU: GS59218
This Marshall 1936 2x12 Cab features two G12T-75 Celestion speakers, 150 Watts RMS at 8ohm (Mono) or 16 ohm(stereo) impedence. An excellent, great sounding cab to go along with any amp!
CALL 1-203-740-8889 more information »
|
|
|
|
|
|
|
SKU: GS1780928
Model:Paul Reed Smith 2X12 Closed Back
All the great tone you’d expect from a classic 2×12 closed back cabinet with a versatile sound well suited for rock. It features two Celestion vintage 30 12” speakers, has an 8 ohm impedance and can handle up to 120W.
Features:
Vintage solid pine construction
Celestion Vintage 30
CALL FOR MORE INFO!
314-781-7500
more information »
|
|
|
|
|
|
|
SKU: GS60509
This Marshall 425A Angled Cab features four 12" G12C speakers powered by 100 Watts total RMS, with 16/4 OHMS impedance mono, and 8/8 OHMS impedance stereo.
From the Marshall website:
"The 425A and 425B are the associated cabinets in this range as per our traditional 4x12 design. The speakers used in these mono/stereo switchable 4x12"s and in the 2266C combo are the brand new G12C 25 Watt Celestion Greenbacks. These were specifically developed for the Limited Edition Jimi Hendrix SuperJH100 stack and are voiced to give that rich and balanced harmonic timbre that compliments vintage tone and therefore the Vintage Modern Series perfectly."
CALL 1-203-740-8889 more information »
|
|
|
|
|
|
|
SKU: GS60974
This is the most versatile isolation/speaker cabinet there is. The AxeTrak 112 is the first product of its kind. It comes stock with one front loaded 12\" speaker for stage sound, in addition to having our AxeTrak isolation cabinet permanently mounted inside its enclosure for direct micing or recording. The AxeTrak 112 has a dual input impedance that can be easily switched between 4 ohms and 16 ohms and can handle 120 watts rms in either mode. This cabinet is perfect for the working musician that occasionally needs a 1 x 12 cabinet, occasionally needs to record the sound of their amp without disturbing others, occasionally needs to perform in a quiet stage environment running through the house sound system. The AxeTrak 112 is very simple to use. Simply connect the speaker jack of any high gain guitar amp to the input jack of the AxeTrak. If you wish to mic or record your rig just plug a low impedance microphone cable into the XLR output jack on the back of the cabinet. Plug the other e more information »
|
|
|
|
|
|
|
SKU: MA212Bv30
NEW FACTORY DIRECT PRICING!
The Mach Series of 2x12 Guitar Cabs by MILLS Acoustics have earned the reputation of "awesome little monsters". Their revolutionary acoustical design delivers massive low end crunch, with smooth, powerful mids and highs. The cabs are an oversize design which delivers amazing presence and projection yet with a clarity never before seen in any previous design. They are stadium ready and investment grade...meant to be run hard by Pro Musicians. The cabs are powered by Celestion Vintage 30 speakers and are wired in a mono circuit using 14 ga. stranded copper primary wire. The construction is 13 ply 18mm Russian Birch plywood. The cab's power handling is 140 Watts RMS. They are quite simply the finest cabs in the World...Period. All MILLS Acoustic Cabs carry the most comprehensive Satisfaction Guarantee in the business. more information »
|
|
|
|
|
|
|
|
|
SKU: GS62209
4X12 CLOSED BACK SLANT W/CELESTION VINTAGE 30'S/280 WATTS/16 OHMS "STILL IN BOGNER FACTORY BOX, NEVER OPENED" (314)781-7500 more information »
|
|
|
|
|
|
|
SKU: GS553853
LOADED WITH 8ohm VINTAGE 30'S
The 2x12 OS Wave is totally unique in its appearance however, the magic of this cabinet lies within. This patented design is truly something special. The Port City Wave cabinet is constructed with a 5-inch wide, 45-degree angle sound deflecting rear panel. This panel is dadoed on both sides of the cabinet for ultimate support. Internal sound waves are projected from the back of the speaker down to the bottom of the cabinet where another 45-degree panel projects sound waves towards the front of the cabinet. A 1 1/8 inch angled port runs the width of the cabinet and projects these sound waves out towards you.
Not only do you hear the sounds from the speakers, you also hear the sound normally "lost" inside your cabinet. This design results in a much more responsive and louder cabinet. The tone produced from the Wave cabinet is smooth, even, focused and clear. The Wave cabinet is NOT a detuned cab. It is not designed to boost or cut any certain frequencies. It is designed to harness all the sound your speaker produces. The 2x12 OS Wave cabinet can match most 4x12 cabinets in its volume and depth. The main benefit is the dynamic response. When you dig into a bend or chord on your guitar you can hear and feel the difference with this cabinet. more information »
|
|
|
|
|
|