| Results For: | Gear Type: Banjos
Gear Type: Misc. Stringed Instruments
|  |
Filter:
|
SKU: GS3079986
VGC except needs much work (could benefit from a neck reset, glue loose frets, glue loose fretboard, bridge, and back braces, fill fretboard crack, setup, etc. - sold AS-IS), 11-1/4'' lower bout, spruce top (one repaired crack), Brazilian rosewood back and sides (one repaired back crack), Brazilian rosewood-bound body, mahogany neck, 19 fret ebony fingerboard with slotted diamond inlays, Brazilian rosewood headstock overlay, ''GROVER PAT.'' geared banjo tuners with ivoroid buttons, herringbone soundhole rosette and back stripe, ebony bridge (one missing bridge pin), missing endpin, 1-1/4'' nut, 22-5/8'' scale (SN:32472) Item ID 80U-2442. 11 photos at http://www.elderly.com/vintage/items/80U-2442.htm more information »
|
|
|
|
|
|
|
SKU: GS3079967
EC-, 11'' clear plastic head, 3/4'' maple rim with inner and outer ivoroid binding and herringbone purfling, archtop tone ring, engraved flange, tension hoop, and arm rest, double ivoroid-bound flamed maple resonator with herringbone side purfling and engraved pearl frog inlay and other carved designs, flamed maple neck with carved heel, ivoroid-bound 22 fret ebony fingerboard with pearl frog and cattail inlays and herringbone underlay, ebony headstock overlay with pearl frog inlay, geared tuners with pearloid buttons, finger style tailpiece, rotating arm string-mute, all gold hardware, we are told by the original owner that this banjo was specially order as a plectrum banjo built to a shorter 24'' scale (we have set it up to play as a tenor at present), 1-1/8'' nut width, made in the USA by Wayne Fairchild, on consignment, with HSC (red lining) (SN:3795-4-83) Item ID 80U-2468. 14 photos at http://www.elderly.com/vintage/items/80U-2468.htm more information »
|
|
|
|
|
|
|
SKU: GS3079950
EC, walnut neck and double ivoroid-bound resonator (very nice burl on resonator!), ivoroid-bound 22-fret ebony fingerboard with floral inlays, 1-3/16'' nut width, 27'' scale, nickel plated brass hardware, Tony Pass Lost Forest block-laminated rim, Hopkins flathead tone ring, one-piece flange, ebony headstock overlay with Hopkins logo and other fancy inlays, five 2-band geared tuners with ivoroid buttons, interior label signed by Paul and David Hopkins, fine sounding banjo, with Calton case (blue lining) (SN:1029-2) Item ID 70U-3638. 16 photos at http://www.elderly.com/vintage/items/70U-3638.htm more information »
|
|
|
|
|
|
|
SKU: UBB30546
UBB30546 The RB100 was made alongside the RB250 Mastertone with the same construction. The RB100 differed in that it did not have the Mastertone style tone ring and had simple dot inlay on the unbound fretboard. But savvy pickers know that with the addition of a Mastertone tone ring (such as the Kulesh ring installed here) you have a "stealth" Mastertone with all the punch and power at a reduced price. Our theory (also held by such banjo gurus as Tony Pass) is that the wood rim, the aged hard rock Maple rim, is part of the secret to the tone. The Maple rim in this banjo is almost 60 years old, and when combined with a superior tone ring, proves to be a superb tone machine. This has the tone and power pickers love. With original hard case. more information »
|
|
|
|
|
|
|
SKU: GS3079928
VG-EC except needs work (replace head, dress frets, replace thumbscrews, clean, restring and set up, etc. - sold AS-IS), Bluegrass style banjo, mahogany neck, white-bound 22-fret rosewood fretboard with varied pattern inlays, 1-3/16'' nut width, 26-1/4'' scale, 20-hole flathead-style tone ring, one-piece flange, 5/8'' multi-ply rim, single coordinator rod, 24-brackets, double white-bound rosewood resonator with decorative pearl cross inlay in center of back, replacement Planet-style tuners, replacement clamshell tailpiece (broken original butterfly-engraved tailpiece in case), Shubb sliding 5th string capo installed, missing armrest, quality import banjo, with flat top semi-HSC (yellow lining), price reduced Item ID 70U-3175. 13 photos at http://www.elderly.com/vintage/items/70U-3175.htm more information »
|
|
|
|
|
|
|
SKU: GS3079925
EC+, wonderful handmade banjo from renowned maker Doug Unger, 3-piece American figured cherry neck with Cole-style carved boat heel, 2-way ''Hotrod'' truss rod, fancy engraved enhanced Fairbanks style snail shell inlays in unbound tortoise-plastic overlayed headstock and ivoroid-bound ebony fretboard, 22 frets, original 1917 Vega tubaphone rim is painted black and bound in tortoise plastic, 10-1/8'' Fiberskyn head, ~26-1/8'' scale length, 17/32'' rim, 28 brackets, 5 early Champion pegs (only one marked ''Pat'd May 8, 88) with ivoroid buttons, new No Knot tailpiece, fluted fossilized ivory nut, engraved snail maker's plate on dowel stick, great tone, original Vega tubaphone rim with Victorian style banjo neck made in the 21st Century, superb Unger artistry and quality Item ID 60U-2552. 12 photos at http://www.elderly.com/vintage/items/60U-2552.htm more information »
|
|
|
|
|
|
|
SKU: GS3079929
EC, 11'' frosted plastic head, transparent blue stained maple rim and neck, 24 brackets, 20 hole flathead tone ring, ivoroid-bound 22 fret ebony fingerboard with varied inlay pattern, ebony headstock overlay with pearl fleur-de-lis inlay (truss rod cover in case), Five Star tuners with pearloid buttons, Kershner style tailpiece, double white-bound resonator with pearloid back (from TB-11), 1-1/4'' nut, 26-3/8'' scale, handcrafted in the USA by Mike Dawson, on consignment, with HSC (wine red lining) Item ID 70U-3613. 16 photos at http://www.elderly.com/vintage/items/70U-3613.htm more information »
|
|
|
|
|
|
|
SKU: GS3079981
EC, black finish, maple neck and double white-bound resonator, 19-fret pearloid fingerboard with silkscreened ''inlays'', 1-1/8'' nut width, 23'' scale, one-piece flange, brass hoop tone ring, nickel hardware, ''Grover PAT.'' tailpiece and geared tuners (white plastic buttons), pearloid headstock overlay with silkscreened logo and 4-pointed star, pearloid back of resonator with similar silkscreened design, made by Gibson and very similar to their TB-11 model, on consignment Item ID 80U-2306. 14 photos at http://www.elderly.com/vintage/items/80U-2306.htm more information »
|
|
|
|
|
|
|
SKU: GS3079913
EC, 12'' Elite head, 1/4'' satin black finished maple rim with rolled brass tone ring, outside herringbone marquetry ring, 18 brackets, 3-piece maple neck with black center strip and Dobson style heel, 16-fret ebony finger board with frailing scoop, pearl dot inlays with starburst at 5th fret, ebony peghead overlay with pearl star, crescent moon and black painted backstrap, chrome two-band tuners with vintage white plastic buttons, Gotoh 5th string tuner, No Knot tailpiece, ~1-5/16'' nut width, ~25-5/8'' scale, good sound, handcrafted in the USA by Mike Dawson, on consignment, with Boulder Alpine Series gigbag - price reduced Item ID 60U-2488. 13 photos at http://www.elderly.com/vintage/items/60U-2488.htm more information »
|
|
|
|
|
|
|
SKU: GS3043893
An Early Example of this Rare Long Neck Model from the Folk Revival Era! EXC w/OSSC more information »
|
|
|
|
|
|
|
SKU: GS3079951
EC, 11'' frosted plastic head, 5/8'' maple rim, 24 brackets, 20 hole flathead tone ring (this is not an HR-30 tone ring and engineered rim), white-bound flamed maple resonator with sunburst finish, flamed maple ''speed'' neck (finished removed from back), 22 fret rosewood fingerboard with hearts and flowers inlays and ''TRUETONE'' inlay at 12th fret, railroad spikes installed at frets 7,8,9, and 10, black headstock overlay with with pearl Huber logo and fleur-de-lis inlays, geared double ring tuners with ivoroid buttons, Presto tailpiece, nickel hardware, 1-3/16'' nut, 26-3/8'' scale, fine sound, on consignment, with arched-lid HSC (green lining) (SN:605-44) Item ID 70U-3641. 16 photos at http://www.elderly.com/vintage/items/70U-3641.htm more information »
|
|
|
|
|
|
|
SKU: GS2848
From workhorse to showstopper, our banjos are seen on every stage and played by some of the finest pickers in the country, or the city. From tone ring to inlay, it's what a great banjo should be. This banjo features Bell Brass tone ring, Maple neck, Mahogany resonator, 24 tension brackets, Flat fingerboard radius, Rosewood fingerboard, Black/White truss rod cover, Maple and Brass bridge with a rosewood tip, Tension tail piece, Chrome geared tuning machine, Remo high tension head. Call 203 740 8889 more information »
|
|
|
|
|
|
|
SKU: GS3079979
VG-EC except several repaired top cracks, double bound 16'' body, sunburst finish on spruce top, dark natural finish on maple back and sides, 12 fret mahogany neck, rosewood fretboard, dot inlays, 18 frets, very cool tailpiece somewhat unique to this instrument, ebony andjustable bridge, headstock overlay features logo inlay, geared banjo style tuners, very cool, 1-3/16'' nut, 23'' scale, with modern thermoplastic HSC (SN:88925) Item ID 80U-2435. 15 photos at http://www.elderly.com/vintage/items/80U-2435.htm more information »
|
|
|
|
|
|
|
SKU: GS3079912
EC, dark stained maple rim, mahogany neck, fretless ebony fretboard (scooped near rim), 11'' Elite head, brass hoop tone ring, 24 brackets and shoes, No Knot tailpiece, ebony headstock overlay features star inlay, Five Star tuners with pearloid buttons, 1-3/8'' nut, 26'' scale, with HSC, on consignment (SN:2159) Item ID 60U-2595. 12 photos at http://www.elderly.com/vintage/items/60U-2595.htm more information »
|
|
|
|
|
|
|
SKU: GS3079918
EC, extra long neck (Pete Seeger) style banjo, 11'' frosted head, dark natural finish on rim and mahogany neck with volute, guitar style headstock, rosewood fretboard, dot inlays, 25 frets, brass tone hoop, 24 bracket hooks, single coordinator rod, 4 geared tuners with white plastic buttons, mechanical friction 5th string tuner, armrest installed, sold AS-IS (needs fret polish, strings, set up, etc.), 1-3/16'' nut, 32-1/2'' scale, with (rough) OSSC (SN:056342) Item ID 60U-2332. 15 photos at http://www.elderly.com/vintage/items/60U-2332.htm more information »
|
|
|
|
|
|
|