August

Restoring an Original

ARTICLES

Replacing the Soundboard on a 1977 Martin D-35, PT. 2

September 5, 2012
After concluding that the damage was so severe that the top could not be restored without compromising the guitar’s sound—not to mention its looks—I began the process of outfitting this fine instrument with a replacement soundboard.
Read More

Replacing the Soundboard on a 1977 Martin D-35

August 10, 2012
This 1977 D-35 arrived at our shop with a big hole in its Sitka spruce soundboard and a bag of miscellaneous broken braces and slivers of spruce top wood.
Read More

Gluing Braces Inside a 1967 B-45-12N

July 9, 2012
1. Using tape to determine the size of the gap that needs to be glued. 2. Threading the stem of the trimmed pipette into the brace repair tool. 3.
Read More

Replacing Saddles on a 1971 Gibson SB 300 Bass

June 8, 2012
The problem lay in the Multiplex adjustable bridge. The unit itself is made of metal, but the original saddles are made of nylon 6-6, a material used in bearings and gears due to its abrasion resistance and self-lubricating properties.
Read More

Reviving a 1965 Gibson Firebird

May 11, 2012
This 1965 Gibson Firebird is a very rare bird indeed. For starters, it barely made it through a house fire.
Read More

Restoring a 1963 Gibson EB-OF Fuzztone Bass

April 6, 2012
Gibson made the EB-OF with a doublecutaway slab mahogany body with rounded horns and a transparent cherry-red finish.
Read More

Resuscitating A Ruined '56 Fender Esquire

March 9, 2012
1. To repair the hacked-up body of this ’56 Esquire, I cut replacement pieces from old ash and shaped them to graft back into the guitar. 2. Today’s commercial
Read More

Restoring a Prototype Gibson Cello Bass, Pt. 2

February 10, 2012
Though the groundwork was laid by Gibson, I still faced many questions and had to work through a number of mechanical designs.
Read More

Restoring A Prototype Gibson Cello Bass

January 10, 2012
The groundwork was laid by Gibson, but there are still many mechanical designs to work through and questions to answer about how the original builder intended to make it all come together.
Read More

Restoring the Neck on a 1965 Shoreline Gold Fender Strat

December 20, 2011
You may recall that a previous owner had decided to install a Floyd Rose locking nut and tremolo. My job will be to replace missing wood, patch various holes, and re-install the original Fender trem, which fortunately stayed with the guitar.
Read More

Resurrecting A 1965 Shoreline Gold Fender Strat

November 15, 2011
As I checked out this cool Strat, it became immediately clear why it was brought to us. Ouch! Someone had decided to rock out and install a Floyd Rose locking nut and tremolo.
Read More

Refretting a '72 Gibson Les Paul Deluxe

October 18, 2011
If you’ve been reading this column recently, you’ll recall we’re in the middle of restoring a ’72 Gibson Les Paul Deluxe.
Read More

Restoring a ’72 Gibson Les Paul Deluxe

September 20, 2011
This time around, we’ll begin restoring the guitar based on last month''s diagnoses.
Read More

Evaluating a '72 Gibson Les Paul Deluxe

August 16, 2011
Every guitar that comes into our shop is first thoroughly examined using an assortment of tools and techniques.
Read More

Bridge Work On A ’74 Gibson Flattop

July 19, 2011
I was concerned that the wafer-thin bridge would develop cracks between each bridge-pin hole—and also possibly bust out at the front.
Read More

Replacing the Bridge on a '74 Gibson Flattop

June 14, 2011
As I was examining the guitar, my eyes were drawn to six black bridge pins protruding from its wafer-thin rosewood bridge and strings that were sloping over a rickety, bottomed-out plastic saddle.
Read More

Steaming out Dents in a ’71 Medallion Flying V

May 17, 2011
When it comes to Gibson’s Flying V guitars, most V fanatics rank the Medallion model as one of the most desirable. In 1971, Gibson made a limited edition of
Read More

1920s Slingerland Maybell Banjo Uke

April 19, 2011
A Maybell banjo uke in need of some work on the tension hoop.
Read More

Resetting A 1952 Goldtop Les Paul's Neck

December 21, 2010
Resetting the neck angle and replacing the neck
Read More

Removing a 1952 Goldtop Les Paul's Neck

November 16, 2010
How to disassemble a precious vintage instrument without altering the original finish
Read More