Mod Garage
Mod Garage: ’50s Les Paul Wiring in a Telecaster
November 15, 2013
It’s easy to wire your Telecaster’s tone and volume controls the way Gibson wired late-’50s Les Pauls.
Read More
Mod Garage: How to Wire Alternative Tele 3-Way Switches
October 25, 2013
Once you understand how the classic CRL Telecaster 3-way switch is wired, you can transfer this knowledge to other popular brands and models. It’s easy and we’ll show you how to do it.
Read More
Mod Garage: How to Wire a Stock Tele Pickup Switch
October 4, 2013
We demystify the eight lugs on a Telecaster’s 3-way switch and show you the right way to connect them to the two pickup leads and master volume pot.
Read More
Mod Garage: Inside the 3-way Telecaster Pickup Switch
August 23, 2013
Because the Telecaster’s 3-way switch lies at the heart of many cool mods, it’s important to explore it. There’s more to this little piece of hardware than meets the eye.
Read More
Factory Telecaster Wirings, Pt. 2
July 19, 2013
Exploring the post-1967 wiring, referred to as the “modern” or “standard” Telecaster wiring that's is still in use today.
Read More
Factory Telecaster Wirings, Pt. 1
June 21, 2013
How Fender's factory Tele wiring evolved, and ways to mod them.
Read More
Fighting Feedback in a Telecaster
June 8, 2013
By addressing two of problematic areas, the following mods will dramatically reduce the chance of feedback.
Read More
Preparing Your Tele for Future Mods
May 11, 2013
In anticipation of all the Telecaster mods we have in store, let’s devote this column to getting your pickups ready for the adventure. For starters, unstring your Tele and remove
Read More
Telecaster Obsession
April 15, 2013
Let’s review our Tele history and get some insights from one of the best Tele masters alive, Greg Koch.
Read More
The Two-Pickup Esquire Wiring
March 11, 2013
Also called the “Broadcaster blend circuit,” this wiring is the transition circuit between the single-pickup Esquire and the Telecaster with its well-known dual-pickup configuration.
Read More
The Ultra-Flexible Esquire Wiring, PT. 2
February 4, 2013
Last month, we began a special project: We wanted to squeeze as many useable sounds as possible from a single-pickup Esquire [“The Ultra-flexible Esquire Wiring, Pt. 1,” February 2013]. And
Read More
The Ultra-Flexible Esquire Wiring, PT. 1
January 9, 2013
Essentially, the idea is to squeeze as many useable sounds as possible from a single-pickup Esquire.
Read More
Humbucker Pickups in an Esquire, PT. 2
December 10, 2012
Fig. 1. Wiring diagram for 3-way operation of the Chopper T Bridge pickup. Diagram courtesy of dimarzio.com In last month’s column, we began exploring options for installing a humbucker
Read More
Humbucker Pickups in an Esquire, PT. 1
November 5, 2012
In recent months, we’ve been exploring
wiring options for the Fender Esquire.
This time around we’ll continue our
journey by investigating Esquire-friendly
humbuckers.
Read More
The Tapped Esquire Wiring
October 8, 2012
Fig. 1. This schematic shows how to wire a tapped Telecaster bridge pickup into an Esquire. Diagram courtesy of seymourduncan.com For the last few issues, we’ve been investigating the
Read More
How to Get an Authentic Johnny Cash/Luther Perkins Esquire Tone
September 12, 2012
The tone is 50 percent equipment and 50 percent technique know-how.
Read More
The "Luthercaster" Esquire Wiring
September 5, 2012
Nicknamed the “Luthercaster,” this is the guitar I play onstage with our local Johnny Cash tribute band.
Read More
The Modded Eldred Esquire Wiring
August 10, 2012
The basic Eldred wiring is very useable and flexible, and that’s the main reason why so many pro Esquire players choose it.
Read More
The Eldred Esquire Wiring
July 9, 2012
Let’s dive into the “Eldred Esquire wiring,” one of the most popular wiring schemes for this iconic Fender model.
Read More
Esquire Mods, Part 2
June 8, 2012
Go one step further and change the values of the parts used in the resistor/capacitor network.
Read More