StewMac Sun Fuzz Pedal Kit
nspired by Analogman's Sun Face, our version finally gives you the control and tone shaping you've always wanted from the original Fuzz Face circuit. If you love Hendrix, Clapton, or Gilmour—this fuzz must be on your board.
The Fuzz Face is one of the foundational tones for electric guitar. However, the originals can be hard to control and don't play nice with many pickups and amps—even temperature can completely change the tone! Following Analogman's lead, we've swapped the germanium transistor for a silicon BC-108, giving the pedal a brighter tone, more gain, and enhanced touch sensitivity.
The most versatile fuzz you've ever tried
With simple controls for volume, fuzz, and tone it's easy to dial in just a touch of fuzz for chunky chords or max it out for super saturation and sustain. Want to go deep? You can further tailor the sound with the internal clean and bias controls for infinite tone tweaking. And it sounds great with humbuckers, single-coils, and P-90s—this fuzz can do it all.
Designed with the beginning pedal builder in mind
No need to wait months for Analogman or try your luck on the used market—this is an easy pedal to build.
We include everything you need:
- 32 page step-by-step instructions written for the first time builder
- Top quality, high tolerance components from resistors to switches
- Road-worthy rugged metal enclosure with all holes pre-drilled
- Bare or powder coated white finish
- 3PDT breakout board for low noise
- Internal trim pots for tone shaping
- Input, output, and power jacks rear mounted for easy cable routing
- True bypass
- Custom printed labels
StewMac Two Kings Boost Pedal Kit
Can't wait 5 YEARS for an Analogman King of Tone? Now you can build a pedal that captures the tone of the amazing original. Raved about by players like John Petrucci, Gary Clark Jr, Samantha Fish, and Warren Haynes, you no longer have to wait to add it to your rig.
Inspired by a heavily-modded Marshall Blues Breaker, this 2-in-1 pedal is something completely different. It's transparent but still warm and gritty, with a full range of frequencies available, all while keeping the core tone of your guitar and amp.
Don't wait! Build it now
We're not that patient! We wanted to make a pedal that was faithful to the original, but you could get your hands on it now. After months of dialing in the sound, we finally captured it. Now you can open the box and handwire yours in a weekend!
Ghost Drive
StewMac Ghost Drive Pedal Kit
More than a "klone"—it's the closest we've ever seen to the real thing! Few pedals reach mythical status like the Klon Centaur Professional Overdrive. We scoured the world for the EXACT right components to recreate this "holy grail" circuit.
Considered the finest transparent overdrive ever, the original Klon is shrouded in mystery, epoxy, and hype—but amazingly, it delivers. It's a guitar player's dream come true: saturated tube tone from your amp at a reasonable volume. It doesn't change the character of your amp, you get just the right amount of overdrive without losing your unique tone. It's relied on by countless players like Joe Perry, Mike McCready, Joe Bonamassa, John Mayer, Nels Cline and more.
Don't buy your next pedal—build it!
Original Klon's are selling for up to $10,000 (and they're still going up)! Many big pedal makers make their own "klones", but they never quite get it right. With this kit you'll be hand-wiring every component to the board, just like the originals. Many believe the hand-wired circuit has a huge impact on the tone of this pedal. And…the black epoxy is optional.
All the right components
We dug deep to find the identical pair of 1N34A germanium diodes just like the original. Many claim these diodes were the heart of the original Klon and why so many of the imitators fall short.
This pedal is extremely easy to use: just gain, treble, and output. The gain is where the magic is by adding sweet saturation and harmonics while retaining the character of your amp. The treble acts as a boost or cut, allowing you to dial in the perfect mid-range for your tone.
Pedal Building Tool Set
Start building your own effects pedals
Are you ready to take control over your sound? Here's all the right tools you need to get started.
Building pedals is super fun and really rewarding. With just a few solder joints and a bit of tinkering, you can shape your tone in completely new ways. When you're first getting started it can seem overwhelming with all the tiny transistors, resistors, and delicate connections. Now we've made it easy even if you're new to working on electronics.
We've picked the quality tools pros use so you'll have great sounding pedals right from the start. From keeping PC boards steady, to stripping fine wires, to making tiny connections, this set has everything you need for solid connections and trouble-free builds.
The Pedal Building Tool Set includes:
Guitar Tech Screwdriver and Wrench Also sold separately
This handy screwdriver set has every specialized bit you need to build pedals and a whole lot more. With this set you can install all of the knobs, switches, nuts, and jacks you'll come across, and even adjust tiny trim pots inside pedals too. Not only that, you can adjust all the hardware on your instruments too.
PC Board Holder Also sold separately
This is the essential third hand you need when building pedals! One small slip can ruin a trace or melt a fragile component. You need both hands for these jobs, and holding your work steady is important for a clean connection (and so you don't burn yourself!). This holder locks the board steady and moves in any direction you need, which makes it easy to solder on crowded PCBs.
Wire Cutter Also sold separately
This isn't your ordinary wire cutter—the extremely fine angled cutter allows you to get close to your solder joints and trim away all excess component leads. This is integral to having fewer shorted connections in your builds.
Fine-gauge Wire Stripper Also sold separately
Pedals (and pickups too) use very fine wires that are nearly impossible to strip with hardware store strippers, and it's easy to damage the wire and ruin the connection. These strippers make removing the coating from tiny wires a total breeze.
Solomon SR-965 Soldering Iron Also sold separately
This dependable iron gets the job done without breaking the bank. The fine point tip is perfectly made for soldering a printed circuit board. It heats up fast and gives you the right control to make delicate connections.
Solomon Soldering Stand Also sold separately
The stand keeps the iron held safely and the included sponge keeps the tip clean for better connections.
Solder Wick Also sold separately
The right way to fix soldering mistakes! Solder Wick is essential for getting the solder out of a joint without overheating and burning out the pads on delicate printed circuit boards. It helps clean up excess solder too.
Delta 60/40 Solder Also sold separately
The right solder for guitar electronics! We find that one tube lasts for 3-4 pedals worth of solder joints. Approximately 15 feet (457cm) of 60/40 rosin core solder in a handy, easy to use compact dispenser tube. International set includes lead-free solder.
#2318 includes a 110-volt AC electrical appliance, 60Hz. It has a U.S. standard Type A plug with two flat parallel prongs, ungrounded.
