Panic! At the Disco, Idles, the Sword, Torres, and more appear in this gallery of our 14 favorite boards from the last year’s worth of Rig Rundowns.
The bad news: Covid put in-person Rig Rundowns on hold till mid 2021. The good news? Zoom episodes were every bit as compelling! Here are our favorite stomp stations from the last year.
Nicole Row
It may not look like a lot, but Panic At the Disco bassist Nicole Row (who’s also a prolific session player) says these half-dozen pedals cover all the bases for any gig, session, or audition she might find herself at.
Nicole Row's Pedalboard
For Panic’s snarling indie-rock anthems, two of her most-stomped stomps are the Aguilar Fuzzistor and Darkglass Electronics Vintage Microtubes. Meanwhile, she often stacks an EBS OctaBass with other pedals to mimic vintage synth sounds. For silkier, “underwater” sonics, she engages an EBS DPhaser, and for funkier lines she uses an MXR Bass Envelope Filter. Her go-to for sending signal to the house board is a Noble Dual Vacuum Tube Preamp/DI Box.
Rig Rundown: Nicole Row
Kurt Ballou
More often than not, famed metal producer/Converge guitarist/God City Instruments proprietor Kurt Ballou’s biggest pedal need is violent distortion—but he’s got plenty of other toys, too.
Kurt Ballou's Pedalboard
Going clockwise (from top left), we have a Demedash Effects T-120 Videotape Echo (“one of the coolest analog delay pedals”—when bypassed, holding down the left footswitch engages a momentary freeze/shimmer/oscillator), then a Shift Line A+ Astronaut III Multiverb Space Unit from Russia. The red, single-knob God City Instruments design is a “mid-forward, ultimate thrashy, djenty, clanky, articulate, heavy guitar pedal,” while the God City SBD (Super Beatle Distortion) features an active mid boost in front of its fuzz circuit and gonzo bass after it. The GCI OGR (Optical Gain Reduction) is a compressor that Ballou uses on every bass track recorded at God City Studio, while the Foxrox Electronics Octron2 comes in handy for thorny solos bristling with weird overtones and elastic ghost notes. Inspired by the Rangemaster, the GCI Crimson Cock treble booster has an added range control and a switch that adds a Big Muff-style gain stage at the end of the circuit. Lastly, the GCI Ape Eye is based on a vintage API 2520 op amp, and the GCI Jugendstil is a silicon fuzz that Ballou says stands at the crossroads between ’90s British shoegaze and ’90s Swedish death metal.
Rig Rundown - Kurt Ballou
Bones Owens
Alt-roots rocker Bones Owens’ signal first hits a Boss TU-3 tuner, then a Spaceman Saturn V Harmonic Booster, which is always on. After that, the signal zips into a Pete Cornish A/B/C amp splitter, whose A line provides rumbling bass by feeding an Electro-Harmonix Micro POG (used for octave down only), a “tall font” EHX Big Muff (rehoused by Mike Hill), and a Tech 21 SansAmp Bass Driver/DI, which in turn feeds both Owens’ Hiwatt DR103 head and a mixing or recording console. Pre-Covid, the splitter’s B path featured one effect—an Echopark Echodriver preamp—which then fed Owens’ Echopark Vibramatic 4T5A amp, while the splitter’s C line would feature the bulk of Owens’ effects routed to a third amp.
Bones Owens' Pedalboard
However, at the time of our Rig Rundown only the Hiwatt and Echopark amps were being used—so his C-line stompboxes were also being routed to the Echopark head. These include a plethora of Cornish gear—a TB-83 Extra treble ooster, an NG-3 fuzz, an SS-3 overdrive and P-2 distortion (in the same housing), a CC-1 boost/overdrive, and an NB-3 linear boost. Other noisemakers include a silver Klon Centaur, an Endangered Audio Research AD4096 analog delay, a Skreddy Pedals Skreddy Echo, a JHS-modded Boss TR-2 Tremolo (rehoused by Barry O’Neal at XACT Tone Solutions), and a Toneczar Halophaze.
Rig Rundown - Bones Owens
Ariel Posen
Canadian slide master Ariel Posen toured and did session work with this setup for over a year before Covid shut everything down.
Ariel Posen's Pedalboard
Starting at the top left, there’s a Chase Bliss Tonal Recall, a Walrus Audio Monument, and a Chase Bliss Dark World. There’s also a Vemuram Jan Ray overdrive, a KingTone Germanium miniFUZZ, a Morningstar Engineering MC6 MIDI Controller, and a TC Electronic PolyTune3 Mini Noir.
But wait … there’s more! The top panel of Posen’s board lifts to reveal a trio of stomps—a Mythos Pedals Argonaut Mini Octave (delivering up tones), an Eventide H9, and Posen’s signature Hudson Electronics Broadcast-AP, which is always on.
Rig Rundown - Ariel Posen
My Chemical Romance’s Frank Iero
During the pandemic, My Chemical Romance rhythm meister Frank Iero’s pedalboard saw a lot of change as tone hunting became a mind-saving pastime. He has some mainstays, but at the time of our Rig Rundown not much was permanent.
Frank Iero's Pedalboards
The board that was the closest thing to gig-ready had a Fender Marine Layer Reverb, a vintage Pearl CH-02 Chorus, an old Boss DM-2 Delay, an Ibanez CF7 Chorus/Flanger, and an Electro-Harmonix Holy Grail (left side). Meanwhile, the right side of the board was home to menace: a Marshall Blues Breaker, an SNK Pedals VHD distortion/preamp, a Keeley-modded Boss BD-2 Blues Driver, and a Klon Centaur. Everything was powered by a Strymon Zuma and controlled by a Carl Martin Octa-Switch MkII. His tuner was a TC Electronic PolyTune 2 Mini, and his volume pedal was an Ernie Ball VPJR.
Here’s his mess-around-the-house board (with a fine tribute to EVH) that has a pair of Strymons (BigSky and Volante), an Ibanez DE7 Delay/Echo, gold Klon Centaur, Fuzzlord Effects Drone Master, Bowman Audio Endeavors The Bowman (company ran by Rig Rundown alumnus and Against Me! guitarist James Bowman), and an Ernie Ball VPJR Tuner Pedal.
His recording board is made up of versatile staples including a 4-pack of Strymons (Ola, Flint, El Capistan, and Iridium), Bowman Audio Endeavors Fortune and Glory, and a Templo Devices Model 33 Supa vibrato.
Rig Rundown - My Chemical Romance's Frank Iero
Olivia Jean
In addition to vibey guitar work, Third Man Records artist Olivia Jean dedicates much of her onstage energy and focus to singing—which means keeping pedalboard tap dancing to a minimum. Even so, her streamlined stomp station serves up an enviable variety of tones.
Olivia Jean's Pedalboard
Always-on pedals include her Electro-Harmonix Holy Grail and MXR Sugar Drive, while the Third Man Bumble Fuzz gifted to her by Jack White avails stinging solo sounds (the Boss NS-2 Noise Suppressor is handy for reducing unwanted fuzz buzz). She’s also got a TC Helicon Mic Mechanic for vocal reverb, and a TC Electronic Wiretap for recording song ideas. Everything is powered by a T-Rex Fuel Tank Classic, and tuning is monitored with a Korg Pitchblack.
Rig Rundown - Olivia Jean
The Sword’s Kyle Shutt
Kyle Shutt’s pedal playland keeps it classic.
Kyle Shutt's Pedalboard
His pedal playland just a Dunlop Cry Baby 95Q wah, a signature Idiotbox Effects Wild Kyle distortion, an Electro-Harmonix Micro POG, an EarthQuaker Devices Levitation reverb, and a Boss TU-3 tuner. Nearly every square inch of J.D. Cronise’s flight-friendly board is filled with an effect. His guitars hit a TC Electronic PolyTune 3, then a pair of oddballs—a DigiTech Drop and an Electro-Harmonix Freeze—then basics like a Way Huge Conspiracy Theory overdrive, an EarthQuaker Devices Tone Job, MXR Phase 90 and Carbon Copy pedals, an EHX Holy Grail, and a Rocktron HUSH.
The Sword's J.D. Cronise
J.D. maximizes his flight-friendly board by filling nearly every square inch with an effect.
J.D. Cronise's Pedalboard
His guitar hits the TC Electronic PolyTune 3 before reaching a pair of necessary oddballs—the aforementioned DigiTech Drop and an Electro-Harmonix Freeze. The bottom row contains the basic food groups for most rockers: Way Huge Conspiracy Theory (drive), EarthQuaker Devices Tone Job (EQ), MXR Phase 90 (modulation), MXR Carbon Copy (delay), and EHX Holy Grail (reverb). The Rocktron HUSH pedal helps control any unwanted noises and buzzing.
Rig Rundown: The Sword [2021]
Steve Earle
Folk-rock activist Steve Earle’s guitar signal first hits a Boss TU-3 tuner before running into a pair of MXR Carbon Copy analog delays (one set as a 1-second delay for a pre-song rippling effect, and one for slapback) and a Fulltone Full-Drive 2 with two levels of gain. A Voodoo Lab Pedal Power 2 supplies the juice.
Steve Earle's Pedalboard
Chris Masterson
Chris Masterson's Pedalboard
The first stop on sideman Chris Masterson’s pedalboard is an Analog Man Sun Lion. From there the signal hits a Boss TU-3w Waza Craft tuner, an Origin Effects Cali76 compressor, an Analog Man King of Tone, and two Strymons—a Mobius and a TimeLine. A Strymon Zuma supplies power, while a Radial BigShot SW2 controls amp reverb and tremolo.
Rig Rundown: Steve Earle and the Dukes
Torres’s Mackenzie Scott
Little on Mackenzie Scott’s pedalboard could be described as subtle or “transparent”—even her delays and reverbs accentuate the weird.
Mackenzie Scott's Pedalboard
Filth and fury come courtesy of a Joyo Vintage Overdrive and an EarthQuaker Devices Palisades. Next is a Death By Audio Echo Dream 2 modulation/delay/boost/fuzz, which Scott says is her most-used pedal. An EarthQuaker Afterneath provides deep, ambient reverbs, which she often beefs up with faux-synth vibes from an Electro-Harmonix POG2. (Another favorite application for the POG2 is pulling its attack all the way down and dramatically gliding into the notes.) Scott uses an Empress Vintage Modified Superdelay to sprinkle in modulation, reverse delay, and compression, as well as tape-echo-like grit. The last pedal on her board is a Meris Enzo, which she half-jokingly says is equal parts inspiring and frustrating. “I have a hard time getting it under control and taming the beast, but that’s what I love about it.”
Rig Rundown: Torres
Mackenzie Scott (aka Torres) likes a good juxtaposition. Her music is a tightrope act between vulnerability and violence. Scott’s lyrics often reflect intros...IDLES’ Mark Bowen
To accomplish all the fantastic and outrageous tones captured on Idles’ last two records, Bowen brings a whole cast of characters to accomplish that feat.
Mark Bowen's Pedalboards
Mark Bowen’s main board features two Death By Audio units—a Reverberation Machine and an Echo Dream 2—an Adventure Audio Dream Reaper, a pair of Moogs—an MF Delay and an MF Ring—a Death By Audio Waveformer Destroyer, an Electro-Harmonix POG2, a 4ms Pedals Mini Swash Full (which serves up fuzz, distortion, and self-oscillating LFO craziness), two Red Pandas—a Particle and a Raster—and a JHS Haunting Mids. A Boss TU-3w Waza Craft tuner keeps his guitars in check and a GigRig G3 controls preset changes.
Near his amps, Bowen has another batch of tone morphers. Up top he’s got a 4-pack of Moog Moogerfooger monsters—MF-107 FreqBox, MF-102 Ring Modulator, MF-108M Cluster Flux, and a CP-251 Control Processor—and another no-name glitch/synth device. Below those we have an Electro-Harmonix 95000 Stereo Looper, a Strymon TimeLine, an Electro-Harmonix POG2, and an Old Blood Noise Endeavors Minim (reverb/delay and reverse). Lastly, he has a Nord Electro 6D at his disposal. Everything is powered by GigRig Timelord power supplies, while two Strymon Iridiums handle cab emulations.
The last part of Bowen’s setup is this board under his keyboard/Moogerfooger workstation. Here, he has another GigRig G3 switcher, another Electro-Harmonix 95000 Stereo Looper, a GigRig Three2One (to help balance levels between instruments), and three Mission Engineering EP-1 expression pedals (controlling some of the effects in the previous photo).
IDLES' Lee Kiernan
The time spent mentioning everything Kiernan does with these pedals is better served watching the Rundown, listening to Idles’ music, or attending one of their shows. But in doing our due diligence, here are the stomps that corrupt, challenge, and ravage his tone.
Lee Kiernan Pedalboard
Lee Kiernan relies on (upper right) a Strymon Flint, a couple of Drolo Fx stomps—a Twin Peaks tremolo and a Stamme[n] looper/glitch delay/tape machine/sustainer/reverb—and a pair of Death By Audio devices—a Micro Dream delay and a Space Bender prototype. The bottom row of this board is also home to a DigiTech Whammy, an Electro-Harmonix Synth9, an Intensive Care Audio Vena Cava Filter, a Moog MF Ring, and a Boss TU-3 tuner. A GigRig ABY-Baby (top right) is used for amp switching. (The small black box labeled “in/out” was built by tech Gavin Maxwell so Kiernan could quickly test out a pedal without having to rip his setup apart.) The board on the left begins (lower middle of pic) with a Mission Engineering EP-1 expression pedal, a Boss PS-6 Harmonist, an EarthQuaker Devices Data Corrupter, a Death By Audio Interstellar Overdriver Deluxe, and a Death By Audio Evil Filter. The top row of this board features a quartet of EarthQuaker stomps: an Organizer polyphonic organ emulator, an Arrows preamp, a Gray Channel overdrive, and a Tone Job EQ/boost—then proceeds to a Moog MF Chorus, a Death By Audio Reverberation Machine, and a Jam Pedals TubeDreamer.
Rig Rundown: Idles
The blues-rocker takes us inside his remarkable gear sanctuary to show off classic Gibsons, a heaping helping of Hiwatts, and a bunch of rare Pete Cornish pedals.
Facing a mandatory shelter-in-place ordinance to limit the spread of COVID-19, PG enacted a hybrid approach to filming and producing Rig Rundowns. This is the 42nd video in that format.
For nearly two decades, Caleb “Bones” Owens has been fulfilling other artists’ and bandmates’ visions. He was a member of moody hard rockers The Becoming and longtime collaborator with dirty-south rapper Yelawolf. Other notable credits include working alongside Mikky Ekko, composing credits for Rose Falcon and Mike Mains & the Branches, and other contributions to Nashville-based acts. Now primed to take the wheel on his own musical excursion, Bones’ journey starts with his brand-new, self-titled debut album via Black Ranch Records/Thirty Tigers.
Just before releasing the his tight, rollicking 12-song collection, the frontman guitarist (and faux bassist) virtually welcomed PG’s Chris Kies into his Tennessee home jam space (that could double as a Kustom Amplification museum).
In this episode, we find out why Gibsons just fit Bones Owens (and his sound), he explains his Hiwatt-heavy and Echopark-rich amp pairings, and details the Pete Cornish-heavy pedalboards that enable him to punch with the guitar and rumble like a bass.
“This is one is special to me,” admits Bones Owens. “It’s been my main touring guitar for the last few years because it’s a Swiss-Army knife.” Above you’ll see his 2002 Gibson ES-355. If you recognize it from a previous Rig Rundown, you’re not wrong because it belonged to Guster’s Luke Reynolds before Owens bought it off him. Reynolds upgraded the 355 with Lollar pickups—an Imperial humbucker in the bridge, and a Charlie Christian in the neck—replaced the nut, added a Tune-o-matic bridge, a Bigsby, and swapped in Grover Vintage Deluxe tuners. Since purchasing it, Owens hasn’t done anything to the instrument and even hesitates to re-string it. Speaking of strings, Owens used to beat himself up with .012s but now loosens up with Ernie Ball Slinky .010s for most of his instruments.
A close-up of Owens' 2002 Gibson ES-355.
Owens’ favorite over quarantine has become this 2018 Gibson ES-355 “Black Beauty” that he picked up at Nashville guitar store Rumble Seat Music. It was aged by Rock N Roll Relics and was enhanced with Monty’s PAF pickups.
A close-up of Owen's 2018 Gibson ES-355 “Black Beauty”.
Here is Bones’ cherry 2015 Gibson Custom Collector’s Choice 1959 Les Paul Standard R9. While he mostly sticks to the bridge pickup, Owens says this ’burst begs to be in the neck position thanks to its warm alnico-III Custom Buckers.
A close-up of Bones' 2015 Gibson Custom Collector’s Choice 1959 Les Paul Standard R9.
For the oddball lovers, Owens busted out his 1972 Gibson Les Paul Recording singlecut. Before he bought the weirdo from J Gravity Strings in St. Louis, someone gave it the Ace Frehley treatment and dropped in three DiMarzio Super Distortions and stripped out all the crazy original wiring.
A close-up of his 1972 Gibson Les Paul Recording singlecut.
Meet “Ashtray,” Owens’ beloved 2000s Gibson Firebird non-reverse reissue (similar to the original run from mid-’65 through 1969) that is loaded with three mini-humbuckers. The nickname stems from the cigarette stench caked into the guitar when he bought it off a fine southern gentleman at an Alabama truck stop.
A close-up of Bones' 2000s Gibson Firebird non-reverse reissue.
The only non-Gibson in Owens’ Rundown is actually a licensed Gibson copy. Banker Custom Guitars is one of select few luthier shops that have been handpicked and authorized by Gibson to faithfully recreate their iconic instruments. Above is Banker’s ’58 V that has a period-correct two-piece korina body and neck, Indian rosewood fretboard, vintage-specific brass string plate, brad nails, and ferrules, and it came loaded with a set of OX4 Hot Duane PAFs.
A close-up of his Banker ’58 V.
For most of today’s Rundown, we were hearing this Echopark Vibramatic 4T5A. Owens mentions it is loosely based on a brown-panel Fender, but it does have a voice switch that kicks it into an earlier JTM45-style tone. This is supposedly one of 10 4T5A heads ever built.
The Vibramatic head runs into a matching Echopark cab that has three ceramic Warehouse Speakers—two 10" up top and a 12" on the bottom.
For a “bass” tone during his gritty blues-rock duo gigs, Owens will run this ’90s (Audio Brothers) Hiwatt Custom 100 DR103 alongside the Vibramatic. The DR103 rocks through an early ’70s Marshall 2034 cabinet. In a previous life, the 2034 was an 8x10 but now it’s home to two 15s.
Just a fraction of Bones' immense amp collection.
Owens’ signal out of the guitar hits his first board that’s dedicated to his “bass” sound that colors the DR103. The Spaceman Effects Saturn V Harmonic Booster is an always-on, no-matter-what pedal. Then it hits the Pete Cornish A/B/C amp splitter box. Out of that it runs into the Electro-Harmonix Micro POG (just for octave down) and then goes through a “tall font” EHX Big Muff that was rehoused by Mike Hill. From there, he has the Tech 21 SansAmp Bass Driver/DI. If things are cooking onstage, Owens will leave the Saturn V, Micro POG, Big Muff, and SansAmp all on, all the time.
The B signal path is much shorter—it incorporates the Echopark Echodriver that awakens the Echopark Vibramatic 4T5A.
(Typically, the C patch would hit a third amp and handle the bulk of effects, but for at-home-recording purposes, Owens routed all the stomps through the Echopark head.) Before jumping over to the second board on the left, the C path routes through the Cornish TB-83 Extra Treble Booster. Then we have plethora of Pete Cornish pedals—NG-3 (“imminent amp death” fuzz), a SS-3 (overdrive/distortion) & P-2 (distortion) housed together, CC-1 (boost/overdrive) that uses two fixed, low-gain, soft-clipping stages, and a NB-3 (linear boost). The other noisemakers and rebel rousers at Owens’ feet include a silver Klon Centaur, Endangered Audio Research AD4096 Analog Delay, a Skreddy Pedals Skreddy Echo, a JHS-modded Boss TR-2 Tremolo (rehoused by PG columnist Barry O’Neal over at XTS—XACT Tone Solutions), and in the top left is a Toneczar Effects Halophaze.
Click below to listen wherever you get your podcasts:
D'Addario Pro Plus Capo:https://www.daddario.com/ProPlusCapoRR