finish untouched overspray drop dilling lacquer broken headstock repair rivet metal old redo original neck msity tele leds adhesion wear

Have you ever purchased a guitar and thought that the finish might have been altered, but you just never knew for sure? You’re not alone. There are a whole slew of vintage necks and bodies floating around that have had repairs with finish touchups, misleading many in the belief they’re untouched and 100 percent original.

To the naked eye, it can be extremely hard to detect, but by using a black light—a tool used mostly in the violin world—you can uncover the hidden secrets about what a finish may have endured over time.

Here are just a few of the possible reasons I’ve come across for why a finish becomes a candidate for overspray or drop-filling with lacquer: trying to hide the classic brokenheadstock repair; rivet or metal wear from using an old capo; neck wear from many hours of practicing and gigging; patching up miscellaneous body chips and dents; melting in old and new lacquer when removing pick marks; and freshening up the overall look of the instrument with overspray.

On the Bench
At first glance, the face of the headstock appeared to have the misty look of overspray to it. The spaghetti logo decal, in silver with a thin black outline, had some damage as well—a third of it was missing. The date penciled in at the heel of the neck showed the guitar was made in November of 1959. The frets have been replaced to a high standard of excellence. The sides and corners of the heel have some non-factory Fender color fused to them from the body neck rout. The neck was removed from a Tele-kit body, poorly made to look like an original ’59 body.

Overall, this is a wonderful neck. The question is, why is there a very light, misty overspray on the face of the headstock? Using a shop lamp, I couldn’t see any other alterations to the finish with the naked eye. We shall see with the black light.

Black Lighting
To get the best visual when black-lighting a guitar, I prefer to work in a pitch-black room. Black lights start at about $5, and go up from there. There are some pretty cool black light flashlights out there designed with multiple LEDs.

We were ready to light up the neck with a neon glow. It’s not extremely difficult to take readings, but it does take an eye—much like a doctor reading an x-ray. I slowly moved the black light inch by inch across the neck. There it was—the neon glow brought out a disturbance in the natural flow of the finish. The treble backside of the neck had a milky, blotchy appearance, much like when you see a clear layer of finish separating because of an adhesion problem. It seems to me that after years of playing on the neck, the treble backside of the neck naturally had some finish wear. Perhaps someone thought it would be a good idea to tidy things up.

Remedy 
I slowly and carefully sanded with 2500 grit 3M Imperial Wetordry paper, removing the non-original finish. The customer requested to have this procedure done as long as it would not alter the integrity of the neck, and it would look as it did before the non-original finish touch-up was done. A flexible eraser works well as a sanding block when working on the radiused portion of the neck. Before sanding the misty overspray on the face of the headstock, it’s best to first extract the tuner bushings. I used the Tuner Bushing Press from StewMac, which makes it smooth, safe and easy. Once the overspray was removed, I used black light again to make sure everything checked out.

The decal was replaced after taking pictures of the neck, emailing them to Fender, and requesting a replacement decal. Fender is really helpful with this—unless of course it was fraudulently produced. The results were very rewarding: black lighting again revealed no trace of what was there, other than an original, well-played 1959 Telecaster neck.