Nicole Row
It may not look like a lot, but Panic At the Disco bassist Nicole Row (who’s also a prolific session player) says these half-dozen pedals cover all the bases for any gig, session, or audition she might find herself at.
Nicole Row's Pedalboard
For Panic’s snarling indie-rock anthems, two of her most-stomped stomps are the Aguilar Fuzzistor and Darkglass Electronics Vintage Microtubes. Meanwhile, she often stacks an EBS OctaBass with other pedals to mimic vintage synth sounds. For silkier, “underwater” sonics, she engages an EBS DPhaser, and for funkier lines she uses an MXR Bass Envelope Filter. Her go-to for sending signal to the house board is a Noble Dual Vacuum Tube Preamp/DI Box.
Rig Rundown: Nicole Row
Kurt Ballou
More often than not, famed metal producer/Converge guitarist/God City Instruments proprietor Kurt Ballou’s biggest pedal need is violent distortion—but he’s got plenty of other toys, too.
Kurt Ballou's Pedalboard
Going clockwise (from top left), we have a Demedash Effects T-120 Videotape Echo (“one of the coolest analog delay pedals”—when bypassed, holding down the left footswitch engages a momentary freeze/shimmer/oscillator), then a Shift Line A+ Astronaut III Multiverb Space Unit from Russia. The red, single-knob God City Instruments design is a “mid-forward, ultimate thrashy, djenty, clanky, articulate, heavy guitar pedal,” while the God City SBD (Super Beatle Distortion) features an active mid boost in front of its fuzz circuit and gonzo bass after it. The GCI OGR (Optical Gain Reduction) is a compressor that Ballou uses on every bass track recorded at God City Studio, while the Foxrox Electronics Octron2 comes in handy for thorny solos bristling with weird overtones and elastic ghost notes. Inspired by the Rangemaster, the GCI Crimson Cock treble booster has an added range control and a switch that adds a Big Muff-style gain stage at the end of the circuit. Lastly, the GCI Ape Eye is based on a vintage API 2520 op amp, and the GCI Jugendstil is a silicon fuzz that Ballou says stands at the crossroads between ’90s British shoegaze and ’90s Swedish death metal.
Rig Rundown - Kurt Ballou
Bones Owens
Alt-roots rocker Bones Owens’ signal first hits a Boss TU-3 tuner, then a Spaceman Saturn V Harmonic Booster, which is always on. After that, the signal zips into a Pete Cornish A/B/C amp splitter, whose A line provides rumbling bass by feeding an Electro-Harmonix Micro POG (used for octave down only), a “tall font” EHX Big Muff (rehoused by Mike Hill), and a Tech 21 SansAmp Bass Driver/DI, which in turn feeds both Owens’ Hiwatt DR103 head and a mixing or recording console. Pre-Covid, the splitter’s B path featured one effect—an Echopark Echodriver preamp—which then fed Owens’ Echopark Vibramatic 4T5A amp, while the splitter’s C line would feature the bulk of Owens’ effects routed to a third amp.
Bones Owens' Pedalboard
However, at the time of our Rig Rundown only the Hiwatt and Echopark amps were being used—so his C-line stompboxes were also being routed to the Echopark head. These include a plethora of Cornish gear—a TB-83 Extra treble ooster, an NG-3 fuzz, an SS-3 overdrive and P-2 distortion (in the same housing), a CC-1 boost/overdrive, and an NB-3 linear boost. Other noisemakers include a silver Klon Centaur, an Endangered Audio Research AD4096 analog delay, a Skreddy Pedals Skreddy Echo, a JHS-modded Boss TR-2 Tremolo (rehoused by Barry O’Neal at XACT Tone Solutions), and a Toneczar Halophaze.
Rig Rundown - Bones Owens
Ariel Posen
Canadian slide master Ariel Posen toured and did session work with this setup for over a year before Covid shut everything down.
Ariel Posen's Pedalboard
Starting at the top left, there’s a Chase Bliss Tonal Recall, a Walrus Audio Monument, and a Chase Bliss Dark World. There’s also a Vemuram Jan Ray overdrive, a KingTone Germanium miniFUZZ, a Morningstar Engineering MC6 MIDI Controller, and a TC Electronic PolyTune3 Mini Noir.
But wait … there’s more! The top panel of Posen’s board lifts to reveal a trio of stomps—a Mythos Pedals Argonaut Mini Octave (delivering up tones), an Eventide H9, and Posen’s signature Hudson Electronics Broadcast-AP, which is always on.
Rig Rundown - Ariel Posen
My Chemical Romance’s Frank Iero
During the pandemic, My Chemical Romance rhythm meister Frank Iero’s pedalboard saw a lot of change as tone hunting became a mind-saving pastime. He has some mainstays, but at the time of our Rig Rundown not much was permanent.
Frank Iero's Pedalboards
The board that was the closest thing to gig-ready had a Fender Marine Layer Reverb, a vintage Pearl CH-02 Chorus, an old Boss DM-2 Delay, an Ibanez CF7 Chorus/Flanger, and an Electro-Harmonix Holy Grail (left side). Meanwhile, the right side of the board was home to menace: a Marshall Blues Breaker, an SNK Pedals VHD distortion/preamp, a Keeley-modded Boss BD-2 Blues Driver, and a Klon Centaur. Everything was powered by a Strymon Zuma and controlled by a Carl Martin Octa-Switch MkII. His tuner was a TC Electronic PolyTune 2 Mini, and his volume pedal was an Ernie Ball VPJR.
Here’s his mess-around-the-house board (with a fine tribute to EVH) that has a pair of Strymons (BigSky and Volante), an Ibanez DE7 Delay/Echo, gold Klon Centaur, Fuzzlord Effects Drone Master, Bowman Audio Endeavors The Bowman (company ran by Rig Rundown alumnus and Against Me! guitarist James Bowman), and an Ernie Ball VPJR Tuner Pedal.
His recording board is made up of versatile staples including a 4-pack of Strymons (Ola, Flint, El Capistan, and Iridium), Bowman Audio Endeavors Fortune and Glory, and a Templo Devices Model 33 Supa vibrato.
Rig Rundown - My Chemical Romance's Frank Iero
Olivia Jean
In addition to vibey guitar work, Third Man Records artist Olivia Jean dedicates much of her onstage energy and focus to singing—which means keeping pedalboard tap dancing to a minimum. Even so, her streamlined stomp station serves up an enviable variety of tones.
Olivia Jean's Pedalboard
Always-on pedals include her Electro-Harmonix Holy Grail and MXR Sugar Drive, while the Third Man Bumble Fuzz gifted to her by Jack White avails stinging solo sounds (the Boss NS-2 Noise Suppressor is handy for reducing unwanted fuzz buzz). She’s also got a TC Helicon Mic Mechanic for vocal reverb, and a TC Electronic Wiretap for recording song ideas. Everything is powered by a T-Rex Fuel Tank Classic, and tuning is monitored with a Korg Pitchblack.
Rig Rundown - Olivia Jean
The Sword’s Kyle Shutt
Kyle Shutt’s pedal playland keeps it classic.
Kyle Shutt's Pedalboard
His pedal playland just a Dunlop Cry Baby 95Q wah, a signature Idiotbox Effects Wild Kyle distortion, an Electro-Harmonix Micro POG, an EarthQuaker Devices Levitation reverb, and a Boss TU-3 tuner. Nearly every square inch of J.D. Cronise’s flight-friendly board is filled with an effect. His guitars hit a TC Electronic PolyTune 3, then a pair of oddballs—a DigiTech Drop and an Electro-Harmonix Freeze—then basics like a Way Huge Conspiracy Theory overdrive, an EarthQuaker Devices Tone Job, MXR Phase 90 and Carbon Copy pedals, an EHX Holy Grail, and a Rocktron HUSH.
The Sword's J.D. Cronise
J.D. maximizes his flight-friendly board by filling nearly every square inch with an effect.
J.D. Cronise's Pedalboard
His guitar hits the TC Electronic PolyTune 3 before reaching a pair of necessary oddballs—the aforementioned DigiTech Drop and an Electro-Harmonix Freeze. The bottom row contains the basic food groups for most rockers: Way Huge Conspiracy Theory (drive), EarthQuaker Devices Tone Job (EQ), MXR Phase 90 (modulation), MXR Carbon Copy (delay), and EHX Holy Grail (reverb). The Rocktron HUSH pedal helps control any unwanted noises and buzzing.
Rig Rundown: The Sword [2021]
Steve Earle
Folk-rock activist Steve Earle’s guitar signal first hits a Boss TU-3 tuner before running into a pair of MXR Carbon Copy analog delays (one set as a 1-second delay for a pre-song rippling effect, and one for slapback) and a Fulltone Full-Drive 2 with two levels of gain. A Voodoo Lab Pedal Power 2 supplies the juice.
Steve Earle's Pedalboard
Chris Masterson
Chris Masterson's Pedalboard
The first stop on sideman Chris Masterson’s pedalboard is an Analog Man Sun Lion. From there the signal hits a Boss TU-3w Waza Craft tuner, an Origin Effects Cali76 compressor, an Analog Man King of Tone, and two Strymons—a Mobius and a TimeLine. A Strymon Zuma supplies power, while a Radial BigShot SW2 controls amp reverb and tremolo.
Rig Rundown: Steve Earle and the Dukes
Torres’s Mackenzie Scott
Little on Mackenzie Scott’s pedalboard could be described as subtle or “transparent”—even her delays and reverbs accentuate the weird.
Mackenzie Scott's Pedalboard
Filth and fury come courtesy of a Joyo Vintage Overdrive and an EarthQuaker Devices Palisades. Next is a Death By Audio Echo Dream 2 modulation/delay/boost/fuzz, which Scott says is her most-used pedal. An EarthQuaker Afterneath provides deep, ambient reverbs, which she often beefs up with faux-synth vibes from an Electro-Harmonix POG2. (Another favorite application for the POG2 is pulling its attack all the way down and dramatically gliding into the notes.) Scott uses an Empress Vintage Modified Superdelay to sprinkle in modulation, reverse delay, and compression, as well as tape-echo-like grit. The last pedal on her board is a Meris Enzo, which she half-jokingly says is equal parts inspiring and frustrating. “I have a hard time getting it under control and taming the beast, but that’s what I love about it.”
Rig Rundown: Torres
Mackenzie Scott (aka Torres) likes a good juxtaposition. Her music is a tightrope act between vulnerability and violence. Scott’s lyrics often reflect intros...IDLES’ Mark Bowen
To accomplish all the fantastic and outrageous tones captured on Idles’ last two records, Bowen brings a whole cast of characters to accomplish that feat.
Mark Bowen's Pedalboards
Mark Bowen’s main board features two Death By Audio units—a Reverberation Machine and an Echo Dream 2—an Adventure Audio Dream Reaper, a pair of Moogs—an MF Delay and an MF Ring—a Death By Audio Waveformer Destroyer, an Electro-Harmonix POG2, a 4ms Pedals Mini Swash Full (which serves up fuzz, distortion, and self-oscillating LFO craziness), two Red Pandas—a Particle and a Raster—and a JHS Haunting Mids. A Boss TU-3w Waza Craft tuner keeps his guitars in check and a GigRig G3 controls preset changes.
Near his amps, Bowen has another batch of tone morphers. Up top he’s got a 4-pack of Moog Moogerfooger monsters—MF-107 FreqBox, MF-102 Ring Modulator, MF-108M Cluster Flux, and a CP-251 Control Processor—and another no-name glitch/synth device. Below those we have an Electro-Harmonix 95000 Stereo Looper, a Strymon TimeLine, an Electro-Harmonix POG2, and an Old Blood Noise Endeavors Minim (reverb/delay and reverse). Lastly, he has a Nord Electro 6D at his disposal. Everything is powered by GigRig Timelord power supplies, while two Strymon Iridiums handle cab emulations.
The last part of Bowen’s setup is this board under his keyboard/Moogerfooger workstation. Here, he has another GigRig G3 switcher, another Electro-Harmonix 95000 Stereo Looper, a GigRig Three2One (to help balance levels between instruments), and three Mission Engineering EP-1 expression pedals (controlling some of the effects in the previous photo).
IDLES' Lee Kiernan
The time spent mentioning everything Kiernan does with these pedals is better served watching the Rundown, listening to Idles’ music, or attending one of their shows. But in doing our due diligence, here are the stomps that corrupt, challenge, and ravage his tone.
Lee Kiernan Pedalboard
Lee Kiernan relies on (upper right) a Strymon Flint, a couple of Drolo Fx stomps—a Twin Peaks tremolo and a Stamme[n] looper/glitch delay/tape machine/sustainer/reverb—and a pair of Death By Audio devices—a Micro Dream delay and a Space Bender prototype. The bottom row of this board is also home to a DigiTech Whammy, an Electro-Harmonix Synth9, an Intensive Care Audio Vena Cava Filter, a Moog MF Ring, and a Boss TU-3 tuner. A GigRig ABY-Baby (top right) is used for amp switching. (The small black box labeled “in/out” was built by tech Gavin Maxwell so Kiernan could quickly test out a pedal without having to rip his setup apart.) The board on the left begins (lower middle of pic) with a Mission Engineering EP-1 expression pedal, a Boss PS-6 Harmonist, an EarthQuaker Devices Data Corrupter, a Death By Audio Interstellar Overdriver Deluxe, and a Death By Audio Evil Filter. The top row of this board features a quartet of EarthQuaker stomps: an Organizer polyphonic organ emulator, an Arrows preamp, a Gray Channel overdrive, and a Tone Job EQ/boost—then proceeds to a Moog MF Chorus, a Death By Audio Reverberation Machine, and a Jam Pedals TubeDreamer.
Rig Rundown: Idles
![Rig Rundown: The Sword [2021]](https://www.premierguitar.com/media-library/rig-rundown-the-sword-2021.jpg?id=27617610&width=1245&height=700&quality=85&coordinates=0%2C0%2C0%2C0)
The Austin outfit's 2006 debut Age of Winters combined the rhythmic bounce of Tres Hombres with the power and might of Master of Reality. The cross-pollination of Gibbons and Iommi continued in 2008's Gods of the Earth, with heavier right-hand picking and tempos shading towards thrash-y Priest and Thin Lizzy's "Emerald." Traces of proggy psychedelia, like 2112 Rush and late-'70s Genesis, turned 2010's concept album Warped Riders into a swirling voyage of sci-fi conquest and space exploration, with the music matching the otherworldly narrative. And 2012's Apocryphon saw the band settle into themselves, collectively cherry-picking all the things that worked on the previous three albums. Songs like "Cloak of Feathers" and the title track show their musical certainty. High Country, from three years later, showcases a once-singular-sounding band finding a home between Houston and Birmingham that could be best classified as classic mid-'70s hard rock. And 2018's Used Future—as its cover depicts—shows the band comfortably, calmly, confidently pressing the accelerator of their Bombshell Betty 1952 Buick Super Riviera and racing towards their own horizon.
This fall 2021 run had the Sword members—J.D. Cronise (guitar/vocals), Kyle Shutt (guitars), Bryan Richie (bass/keyboards), and Santiago "Jimmy" Vela III (drums)—handling double duty, with a headline tour woven around opening shows for Primus.
Before their top-of-the-bill show at Nashville's Mercy Lounge, Shutt, Cronise, and Richie showed PG how consolidating gear (and volume) has helped them sharpen their blade.
[Brought to you by D'Addario XPND Pedalboard: https://www.daddario.com/XPNDRR]
A Signature Goldtop … but Not That Goldtop
Since our last encounter, in 2014, the Sword guitarist Kyle Shutt has been honored with his very own Reverend Signature KS-1 model. The latest iteration is this eye-catching golden axe that comes with Rev's typical formula—korina body (with a maple cap), 3-piece korina neck, and their bass contour control. (The asymmetrical center block is 1" wider on the bass side than Reverend's similar Manta Ray.)
Standing it apart from other Rev doublecuts and offering some of Kyle's tonal thumbprint is the additional master volume (for stutter effects) and the inclusion of his signature Railhammer humbuckers. The bridge model has similar output and clarity to their Hyper Vintage 'bucker, but aims to add in smoother highs and a thicker tone overall. The neck Humcutter is voiced to mimic a hot P-90, but Kyle wanted it beefed up to match the output of his bridge pickup, so he didn't have to adjust settings. (In the Rundown, he mentions Tom Scholz's DiMarzio Super Distortions and 1968 Gibson Les Paul goldtop as reference points for this collaboration with Reverend.)
Kyle plugs into his Laney with a Ray Raydecker custom cable, strings it up with Ernie Ball Skinny Top Heavy Bottom Slinkys (.010–.052), and is tuned to C standard.
Heads Up!
Other hallmarks of Shutt's sig is that the headstock was the first Reverend to feature an abalone inlay logo, and his John Hancock is etched into the truss rod cover. (All the previous models had the logo painted on, and most of their sig models don't have a truss rod cover.)
Burst Me, Bro!
Here's a Shutt signature Rev that backs up the Venetian gold model—finished with a metallic alpine burst.
Longtime Laney Love
Shutt states that he fired up this Laney AOR Series Pro-Tube Lead head for 2006's Age of Winters, 2008's Gods of the Earth, 2010's Warp Riders, and 2012's Apocryphon, but admits it's not his amp. It belongs to Sword bassist Bryan Richie.
Hey Cabby!
Shutt runs Richie's AOR Series Pro-Tube Lead head into a (beautifully) stripped Marshall 1960B straight 4x12 loaded with a quad of Celestion G12H Creamback 75W 12" speakers.
Shutt up and Stomp!
Kyle's pedal playland keeps it classic with just a Dunlop Cry Baby 95Q Wah, a signature Idiotbox Effects Wild Kyle distortion, an Electro-Harmonix Micro POG, and an EarthQuaker Devices Levitation reverb. A Boss TU-3 Chromatic Tuner keeps his Reverends in check.
JD-V
Cofounding frontman and the Sword's main lyric scribe J.D. Cronise has always been attracted to outliers. This mid-2000s Gibson 1967 Flying V reissue caught his eye while on tour in support of Apocryphon. (He believes the V was built in either 2005 or 2007.)
He's upgraded the hardware, pickguard, and adopted a set of DiMarzios (originally a Super Distortion and a Super 2, and now a pair of PAF 36th Anniversary humbuckers). Like Kyle, he rides in C standard all night and laces on Ernie Ball Mondo Slinkys (.0105–.052).Billy-Bo for Texas
When the once-all-Texas band boogie on ZZ Top's "Cheap Sunglasses" each night (a cover included on 2012's Apocryphon), Cronise struts with this Gretsch G6199TW Limited Edition Round Up Billy-Bo Jupiter Thunderbird that was an exclusive run for Fuller's Guitars in Houston. (Very fitting, since the original tres hombres started rocking H-town in the late '60s.) It still has stock TV Jones Power'Tron pickups and carries enough swag to be a museum piece or swing all Saturday night at Billy Bob's Texas. He tunes it to Eb standard, but uses a DigiTech Drop pedal to morph it to C. For the tighter tuning, he wraps on Ernie Ball Primo Slinkys (.0095 –.044).
Decked Out
Check out some of the intricate, cowboy-and-Western-themed inlays.
And Ready to Dance
The Billy-Bo's classy golden knobs radiate in the orange finish and you can see a few of its bronze, circular rivets on its side.
Orange You Glad to See Me?
If you watched the band's first Rundown from 2014, you'll recognize JD's Orange OR100, as it's the same head featured in that episode.
It's a British Thing
Last time he was hauling a pair of Orange cabs (4x12 and 2x12), but this time Cronise opted to bring his 1990s Marshall JCM 900 Lead Series 1960A slant 4x12 that has a quartet of Celestion G12H Creamback 75W 12" speakers.
Packed Pedal Playground
JD maximizes his flight-friendly board by filling nearly every square inch with an effect. His guitar hits the TC Electronic PolyTune 3 before reaching a pair of necessary oddballs—the aforementioned DigiTech Drop and an Electro-Harmonix Freeze. The bottom row contains the basic food groups for most rockers: Way Huge Conspiracy Theory (drive), EarthQuaker Devices Tone Job (EQ), MXR Phase 90 (modulation), MXR Carbon Copy (delay), and EHX Holy Grail (reverb). The Rocktron HUSH pedal helps control any unwanted noises and buzzing.
Friends at First Sight
When bassist Bryan Richie joined the Sword in 2004, he brought this 1994 Fender MIM Jazz bass. (He was 14 at the time.) Richie's made just two improvements to his first ride: He dropped in some Seymour Duncan Quarter Pound Jazz Bass pickups and screwed in a Leo Quan Badass II Bass bridge. The thin neck and lightweight body are a pair of reasons he continues to grab it, despite a bounty of options. And he plays with Ernie Ball Power Slinky Bass strings (.055–.110).
Ample Amp
Reducing from a SVT stack and 300W Verellen Meat Smoke, Richie now travels with this Ampeg V-4B. For years Richie, would hit the road with a fridge-sized 8x10, but now he matches his V-4B with an Ampeg 4x10 cabinet.
Warp Riders on the Taurus
"Producer Matt Bayles put a bunch of keyboard shit on the record [Warp Riders], and afterwards we wondered 'who was gonna play that?'" Bryan Richie raised his hand and put his feet to work on this Moog Taurus III.
More Moog
Bryan really only has one pedal—a Moog MF Drive. The other stomps are a Peterson StroboStomp and a Radial J48 1-channel Active 48V Direct Box.
