Billy Strings
Billy Strings’ Pedalboard
Bluegrass’ biggest ambassador has continued expanding his sound with more pedals and more modeling. When Billy wants to turn his acoustic into space dust, he’s got a hearty squadron of willing vaporizers. This is where Strings tap dances each night—an incredible feat given how much he’s already doing with his hands. A RJM Mastermind GT MIDI switcher is the brains of the operation as it engages all his pedals and the Kemper’s SLO-100 profile. The Grace Design BiX gives FOH a clean, pure acoustic sound. A pair of Mission Engineering SP-1 expression pedals handle manipulating time-based and modulation effects. His two Ernie Ball 40th Anniversary Volume Pedals bring in Leslie effects and the Kemper. A TC Electronic Ditto Looper remains on the board since our last encounter. A Peterson StroboStomp HD covers any on-the-fly tuning needs during his sets. Nashville’s XAct Tone Solutions built out this tonal headquarters, which features several of their custom devices and routing boxes. A couple Strymon Zuma units power everything on the floor, while a duo of Radial boxes helps organize. (The SGI-44 talks to the rack-mounted JX44, and the JDI is a passive direct box designed to handle gobs of levels without any unwanted crunch.)
Here’s a peek behind the scenes, into the inside of Strings’ rack. Starting at the top left, he has a Voodoo Lab Sparkle Drive, Electro-Harmonix Micro POG, MXR Bass Envelope Filter, Source Audio EQ2, Boss DD-8 Digital Delay, Source Audio C4 Synth, and a Strymon Lex. A Strymon Ojai powers the pedals in this drawer. Moving to the right, he has a Jam Pedals Waterfall, Boss SY-1 Synthesizer, EHX Pitch Fork, Red Panda Raster, and an Eventide H9. All of these gizmos are powered by a Strymon Zuma. Going down to the bottom left, Strings assembles this drawer with a NativeAudio Pretty Bird Woman, a Chase Bliss Wombtone, Source Audio Nemesis, DigiTech Polara, Boss DC-2W Dimension C, and an EHX Freeze. Another Strymon Zuma powers all these creatures. The final drawer houses a Chase Bliss Audio Mood, EHX Intelligent Harmony Machine, and a Chase Bliss Automatone MKII Preamp. Everything comes to life with a final Strymon Zuma.
Blu DeTiger
Blu DeTiger’s Pedalboard
“I haven’t gone through that phase of using crazy pedals yet. Live, I just really love the sound of a clean bass tone,” admits bassist DeTiger. Whether slapping on TikTok, headlining solo tours, performing with Jack Antonoff and Olivia Rodrigo, or improvising over her DJ set, this board represents her go-to gear. Each piece in this cast of characters gets used for specific moments. She uses the octave up on the Electro-Harmonix Micro POG for “shredding” and the sub octave setting to “change the vibe for a second.” The Electro-Harmonix Bass Big Muff enhances some of the POG’s shadings with added stank. The EarthQuaker Devices Spatial Delivery is used for the funky intro to “enough 4 u,” her collaboration with Chromeo. She prefers the Spatial Delivery to the Mu-FX Micro-Tron III (which doesn’t get used at all now) and the MXR Analog Chorus is engaged for one instance. The Boss RE-2 Space Echo sees action with the Strat for “Sonic Youth freakouts” during “Kinda Miss You.” A Boss TU-3 Chromatic Tuner keeps all four strings in line and a Voodoo Lab Pedal Power 2 Plus provides the volts.
Christone “Kingfish” Ingram
Kingfish’s Pedalboard
Christone “Kingfish” Ingram is well on his way to becoming the blues’ newest 6-string ruler and he doesn’t use much gear to get the job done. Kingfish’s signal starts with a Shure BLX4 Wireless Receiver, which hits a Boss TU-3W Tuner. From there, the route is a Dunlop Cry Baby Mini Wah, a Marshall Shredmaster, and a Boss DD-3 Delay, all powered by Strymon. The pedals live on a Pedaltrain Nano board and were assembled by Barry O’Neal at XAct Tone Solutions.
Emily Wolfe
Emily Wolfe’s Pedalboard
“If I get a new piece of gear, I have to figure out every single part of it before I can really use it,” the shreddin’ Texan confessed to PG while talking about her 2021 album, Outlier. That sensible curiosity has led her to dialing in precise parameters on the pedals and creating colossal combos with singular gain staging. Her silver bullet is the EarthQuaker Devices Tentacle Analog Octave Up, running into a Fulltone OCD, and an MXR Six Band EQ. Wolfe claimed to PG, “That’s the sound that belongs to me.” The sequence creates a “crazy fuzztone” from the overdrive. Then she uses the EQ to reduce some of the lows and boost the mids for a sound she says will get her guitar to cut through any mix.
Other spices in the rack include an Analog Man King of Tone, an EarthQuaker Devices Dirt Transmitter fuzz, an Ibanez Analog Delay Mini, an Origin Effects Cali76 Compact Deluxe, a Walrus Audio Julia, and a Strymon Flint. The Empress Buffer puts the Delay Mini and Flint outside the RJM Mastermind PBC’s control.
Underneath the hood, Wolfe has tucked in a pair of MXR M109S Six Band EQ pedals (one hitting the King of Tone and the other hitting the OCD), an Electro-Harmonix Pitch Fork, the EarthQuaker Devices Tentacle, and a couple of Strymon power supplies (Ojai and Zuma).
Hermanos Gutiérrez
Estevan Gutiérrez’s Pedalboard
The Gutiérrez brothers pack light. You can see that Estevan Gutiérrez utilizes nearly every square inch of his pedalboard. Overlaps between the brothers’ boards include the MXR Dyna Comp Mini, the Strymon Flint, and the Strymon El Capistan. You might think their setup is basic now, but they used to play sans pedals. Eventually, Estevan discovered the Strymon El Capistan, and their sound was never the same. “I remember that day,” he recounted to PG about first playing the pedal. “I fell in love. I knew it was gonna change something in our sound.” As soon as he purchased the El Capistan, he called his brother and said, “You have to buy this. This is gonna be next level for us.”
The remaining effects for Estevan include a Malekko Omicron Vibrato, a Boss RC-500 Loop Station, and a Boss TU-3 Chromatic Tuner (off the board) keeps his Gretsch in check. Lastly, you’ll notice a G7th Performance 3 ART Capo on the pedalboard, too.
Alejandro Gutiérrez’s Pedalboard
Alejandro, who plays guitar and lap steel, relies on this compact board that holds a MXR Dyna Comp Mini, a Boss GE-7 Equalizer, a Strymon Flint, and the influential Strymon El Capistan. While Estevan discovered the El Cap and unlocked its magic for Hermanos Gutiérrez, Alejandro has molded it to his sound in different ways. “I use it as a layer,” he explains. “Really subtle. My brother uses it more as a delay. He has this horse sound, like this galloping sound he can create with his slapping, which only he can do.” A Boss TU-3 keeps his guitars in line.
Nile Rodgers
Nile Rodgers’ Pedalboard
The Hitmaker doesn’t drown in effects. Instead, Rodgers maintains a simple, sophisticated signal chain into his Fender Hot Rod Deville. Rodgers uses a Pedaltrain Classic 2, loaded up with an Eventide PowerMax Power Supply. The Eventide feeds a Korg Pitchblack Chromatic Tuner, a Boss DD-3 Digital Delay, an Ibanez CS9 Stereo Chorus, a Mad Professor Snow White AutoWah, an Ibanez TS808 40th Anniversary Tube Screamer, and a Jam Pedals Wahcko Wah Pedal. The stompboxes are all wired together with Reference Laboratory RIC-01 cabling.
Rodrigo y Gabriela
Rodrigo Sánchez’s Pedalboard
The eclectic, trailblazing guitar maestros blend acoustic and electric sounds in their respective rigs. The pickup return from Sánchez’s wireless rack goes to the volume pedal via a Lehle 3at1 switcher, then out to a Lehle P-Split signal splitter. The direct out from the P-Split goes to another Lehle splitter, while the ISO line out runs to the rest of the pedals before ending up at a Fractal. (The ISO out of the first splitter goes to the JHS Mini A/B pedal into the Boss OC-3, then to a separate channel on the desk.) His tone-shapers include an MXR Micro Amp, TWA WR-3 Wah Rocker, MXR Analog Chorus, and a Boss DD-3 Digital Delay. He stays in tune thanks to a Boss TU-3S Chromatic Tuner. It’s all powered by a pair of Truetone 1 Spot Pro CS7 power supplies.
Gabriela Quintero’s Pedalboard
It doesn’t get much simpler than this. Quintero’s pedalboard funnels the acoustic’s first two channels—the undersaddle and the body’s piezos—into a stereo volume pedal. From there, they run through a Dunlop Cry Baby and a Boss DD-3 Digital Delay. The signal is then split, with the first side going back to the DI, and the second running through a Dunlop volume pedal into a Boss OC-3 for an extra bottom octave.
Sunn O)))
Stephen O’Malley’s Pedalboard
Drone metal overlords Stephen O’Malley and Greg Anderson use volume as an aesthetic. “My concept in playing this music for tone involves many, many, many different gain stages that are all intonated differently depending on the pitch of the sound,” O’Malley told us last year. “There are slight shades of color saturation or grain as if it’s a paint—the shorter bandwidth color gradation or the density of the paint.” All these subtle sweeps of saturation, sustain, and feedback are enlivened and exaggerated with Stephen’s pedal palette. His current collection of slaughtering stomps includes the band’s most recent collaboration with EarthQuaker Devices (Life Pedal V3), an Ace Tone FM-3 Fuzz Master, a Pete Cornish G-2, and an EarthQuaker Devices Black Ash. For subtler shadings, he has a J. Rockett Audio Designs Archer.
The EQD Swiss Things creates effects loops to engage the FM-3, G-2, or the Black Ash. In addition, he runs a Roland RE-201 Space Echo through the Swiss Things. O’Malley uses the Aguilar Octamizer as a “fun punctuation that comes on once in a while” that “abstracts the guitar into minimalist electronics.” The custom Bright Onion Pedals switcher keeps the amps in sync with phase controls and ground lifts. A Peterson StroboStomp HD keeps his Travis Bean in check. Off to the side of the board is a Keeley-modded RAT that initiated the band’s core sound, plus a Lehle Mono Volume. This circuit includes the heralded LM308 chip and was the basis for their partnership with EQD and the Life Pedal series.
Elevated off the stage floor and secured by a stand are O’Malley’s Roland RE-201 Space Echo and Oto Machines BAM Space Generator Reverb.
Greg Anderson’s Pedalboard
“To be honest with you, I try to keep it pretty simple now because I love pedals and have fallen down a lot of rabbit holes with them, but I found myself troubleshooting and having more issues than my sound warranted. When I started with this band, it was just a RAT and tuner pedal, so I try to just bring what I need,” says Anderson. He found a potent pairing with the EQD Life Pedal V2 acting as a boost and running into a vintage Electro-Harmonix Civil War Big Muff that creates a “powerful, chewy, ooze” tone. Like O’Malley, he also has a custom Bright Onion Pedals box and an Aguilar Octamizer set to unleash a “ridiculous, beating, fighting, chaotic, sub-bass sound.” An Ernie Ball VP JR handles dynamics, a Boss TU-2 Chromatic Tuner keeps his Les Paul in shape, and an MXR Mini Iso-Brick powers his pedals.
The Flaming Lips
Steven Drozd’s Pedalboard
Given the nature of the Flaming Lips’ expansive and deranged sounds, you wouldn’t be blamed if you thought Drozd would have a rack of pedals or three tethered boards. But you’d be wrong—as he’s currently touring with nine stomps and an Ernie Ball volume pedal. Doing a lot of the heavy lifting is the Boss GT-1000CORE. The other sonic scalpels and sizzlers are a Subdecay Liquid Sunshine, a duo of Universal Audio units—a Starlight Echo Station delay and Golden Reverberator—a TC Electronic Spark Booster, a ZVEX Fuzz Factory, a Source Audio Nemesis Delay, a Keeley Electronics 30ms Automatic Double Tracker, and a Boss EQ-200 Graphic Equalizer.
Unknown Mortal Orchestra
Ruban Nielson’s Pedalboard
The New Zealand guitarist is a tone tactician. He’s never been satisfied with stock sounds and a pedal’s inherent limitations. “If I find a pedal I like, I use it for a long time and then I try to build a clone to see if I can improve on it,” he explains. “I sit around in my basement tweaking it plugged in—on the breadboard—and changing out different components and adjusting the trim until I get everything just exactly how I want it.” So, looking down at his stomp selection you’ll notice a few nondescript devices on the beautiful Twin Peaks Woodworks pedalboard custom-built by both Nielson’s tech Ben Gram and Caspian guitarist Jonny Ashburn.
His signal hits an Effectrode PC-2A Tube Compressor (you’ll notice two on the board—one is a backup). He enjoys how the PC-2A up front fattens his entire sound, and how it smooths and shaves off the transient tinges. The Strymon Deco has a stereo out that hits a pair of JAM Pedals RetroVibes. Both are set to have slightly different speeds and depths so that they really take that stereo signal for a journey in real time, and they’re panned in the PA to amplify this effect.
One of Nielson’s creations shows up inside the gray box titled “Octave Magic,” which is based on the Foxx Tone Machine. The suede purple devil next to it is the JAM Fuzz Phrase LTD, about which Nielson says, “It’s the wooliest, most musical Fuzz Face I’ve ever played.” Sometimes the answer to Nielson’s problems is the Benson Germanium Boost. “If something’s wrong,” he explains, “I’ll kick on that pedal and it makes everything louder and resets the gain structure.” The Gamechanger Audio Plus pedal sees a lot of action throughout the set: It helps Nielson seam the tail end of a solo and discreetly rejoin the band in rhythm mode.
The remaining pedals include a Boss DD-3 Digital Delay (a gift from Mike Baranik), a Danelectro Back Talk reverse delay, an Electro-Harmonix Holy Grail reverb, and in the top-left corner, an unnamed pedal that Nielson built that is currently not in the signal. (He can’t remember if it’s a RAT or Tube Screamer clone.) Utility boxes include a Boss TU-3 Chromatic Tuner, an Electro-Harmonix Switchblade Plus channel selector, and a Lehle Little Dual II switcher.
Nicole Row
It may not look like a lot, but Panic At the Disco bassist Nicole Row (who’s also a prolific session player) says these half-dozen pedals cover all the bases for any gig, session, or audition she might find herself at.
Nicole Row's Pedalboard
For Panic’s snarling indie-rock anthems, two of her most-stomped stomps are the Aguilar Fuzzistor and Darkglass Electronics Vintage Microtubes. Meanwhile, she often stacks an EBS OctaBass with other pedals to mimic vintage synth sounds. For silkier, “underwater” sonics, she engages an EBS DPhaser, and for funkier lines she uses an MXR Bass Envelope Filter. Her go-to for sending signal to the house board is a Noble Dual Vacuum Tube Preamp/DI Box.
Rig Rundown: Nicole Row
Kurt Ballou
More often than not, famed metal producer/Converge guitarist/God City Instruments proprietor Kurt Ballou’s biggest pedal need is violent distortion—but he’s got plenty of other toys, too.
Kurt Ballou's Pedalboard
Going clockwise (from top left), we have a Demedash Effects T-120 Videotape Echo (“one of the coolest analog delay pedals”—when bypassed, holding down the left footswitch engages a momentary freeze/shimmer/oscillator), then a Shift Line A+ Astronaut III Multiverb Space Unit from Russia. The red, single-knob God City Instruments design is a “mid-forward, ultimate thrashy, djenty, clanky, articulate, heavy guitar pedal,” while the God City SBD (Super Beatle Distortion) features an active mid boost in front of its fuzz circuit and gonzo bass after it. The GCI OGR (Optical Gain Reduction) is a compressor that Ballou uses on every bass track recorded at God City Studio, while the Foxrox Electronics Octron2 comes in handy for thorny solos bristling with weird overtones and elastic ghost notes. Inspired by the Rangemaster, the GCI Crimson Cock treble booster has an added range control and a switch that adds a Big Muff-style gain stage at the end of the circuit. Lastly, the GCI Ape Eye is based on a vintage API 2520 op amp, and the GCI Jugendstil is a silicon fuzz that Ballou says stands at the crossroads between ’90s British shoegaze and ’90s Swedish death metal.
Rig Rundown - Kurt Ballou
Bones Owens
Alt-roots rocker Bones Owens’ signal first hits a Boss TU-3 tuner, then a Spaceman Saturn V Harmonic Booster, which is always on. After that, the signal zips into a Pete Cornish A/B/C amp splitter, whose A line provides rumbling bass by feeding an Electro-Harmonix Micro POG (used for octave down only), a “tall font” EHX Big Muff (rehoused by Mike Hill), and a Tech 21 SansAmp Bass Driver/DI, which in turn feeds both Owens’ Hiwatt DR103 head and a mixing or recording console. Pre-Covid, the splitter’s B path featured one effect—an Echopark Echodriver preamp—which then fed Owens’ Echopark Vibramatic 4T5A amp, while the splitter’s C line would feature the bulk of Owens’ effects routed to a third amp.
Bones Owens' Pedalboard
However, at the time of our Rig Rundown only the Hiwatt and Echopark amps were being used—so his C-line stompboxes were also being routed to the Echopark head. These include a plethora of Cornish gear—a TB-83 Extra treble ooster, an NG-3 fuzz, an SS-3 overdrive and P-2 distortion (in the same housing), a CC-1 boost/overdrive, and an NB-3 linear boost. Other noisemakers include a silver Klon Centaur, an Endangered Audio Research AD4096 analog delay, a Skreddy Pedals Skreddy Echo, a JHS-modded Boss TR-2 Tremolo (rehoused by Barry O’Neal at XACT Tone Solutions), and a Toneczar Halophaze.
Rig Rundown - Bones Owens
Ariel Posen
Canadian slide master Ariel Posen toured and did session work with this setup for over a year before Covid shut everything down.
Ariel Posen's Pedalboard
Starting at the top left, there’s a Chase Bliss Tonal Recall, a Walrus Audio Monument, and a Chase Bliss Dark World. There’s also a Vemuram Jan Ray overdrive, a KingTone Germanium miniFUZZ, a Morningstar Engineering MC6 MIDI Controller, and a TC Electronic PolyTune3 Mini Noir.
But wait … there’s more! The top panel of Posen’s board lifts to reveal a trio of stomps—a Mythos Pedals Argonaut Mini Octave (delivering up tones), an Eventide H9, and Posen’s signature Hudson Electronics Broadcast-AP, which is always on.
Rig Rundown - Ariel Posen
My Chemical Romance’s Frank Iero
During the pandemic, My Chemical Romance rhythm meister Frank Iero’s pedalboard saw a lot of change as tone hunting became a mind-saving pastime. He has some mainstays, but at the time of our Rig Rundown not much was permanent.
Frank Iero's Pedalboards
The board that was the closest thing to gig-ready had a Fender Marine Layer Reverb, a vintage Pearl CH-02 Chorus, an old Boss DM-2 Delay, an Ibanez CF7 Chorus/Flanger, and an Electro-Harmonix Holy Grail (left side). Meanwhile, the right side of the board was home to menace: a Marshall Blues Breaker, an SNK Pedals VHD distortion/preamp, a Keeley-modded Boss BD-2 Blues Driver, and a Klon Centaur. Everything was powered by a Strymon Zuma and controlled by a Carl Martin Octa-Switch MkII. His tuner was a TC Electronic PolyTune 2 Mini, and his volume pedal was an Ernie Ball VPJR.
Here’s his mess-around-the-house board (with a fine tribute to EVH) that has a pair of Strymons (BigSky and Volante), an Ibanez DE7 Delay/Echo, gold Klon Centaur, Fuzzlord Effects Drone Master, Bowman Audio Endeavors The Bowman (company ran by Rig Rundown alumnus and Against Me! guitarist James Bowman), and an Ernie Ball VPJR Tuner Pedal.
His recording board is made up of versatile staples including a 4-pack of Strymons (Ola, Flint, El Capistan, and Iridium), Bowman Audio Endeavors Fortune and Glory, and a Templo Devices Model 33 Supa vibrato.
Rig Rundown - My Chemical Romance's Frank Iero
Olivia Jean
In addition to vibey guitar work, Third Man Records artist Olivia Jean dedicates much of her onstage energy and focus to singing—which means keeping pedalboard tap dancing to a minimum. Even so, her streamlined stomp station serves up an enviable variety of tones.
Olivia Jean's Pedalboard
Always-on pedals include her Electro-Harmonix Holy Grail and MXR Sugar Drive, while the Third Man Bumble Fuzz gifted to her by Jack White avails stinging solo sounds (the Boss NS-2 Noise Suppressor is handy for reducing unwanted fuzz buzz). She’s also got a TC Helicon Mic Mechanic for vocal reverb, and a TC Electronic Wiretap for recording song ideas. Everything is powered by a T-Rex Fuel Tank Classic, and tuning is monitored with a Korg Pitchblack.
Rig Rundown - Olivia Jean
The Sword’s Kyle Shutt
Kyle Shutt’s pedal playland keeps it classic.
Kyle Shutt's Pedalboard
His pedal playland just a Dunlop Cry Baby 95Q wah, a signature Idiotbox Effects Wild Kyle distortion, an Electro-Harmonix Micro POG, an EarthQuaker Devices Levitation reverb, and a Boss TU-3 tuner. Nearly every square inch of J.D. Cronise’s flight-friendly board is filled with an effect. His guitars hit a TC Electronic PolyTune 3, then a pair of oddballs—a DigiTech Drop and an Electro-Harmonix Freeze—then basics like a Way Huge Conspiracy Theory overdrive, an EarthQuaker Devices Tone Job, MXR Phase 90 and Carbon Copy pedals, an EHX Holy Grail, and a Rocktron HUSH.
The Sword's J.D. Cronise
J.D. maximizes his flight-friendly board by filling nearly every square inch with an effect.
J.D. Cronise's Pedalboard
His guitar hits the TC Electronic PolyTune 3 before reaching a pair of necessary oddballs—the aforementioned DigiTech Drop and an Electro-Harmonix Freeze. The bottom row contains the basic food groups for most rockers: Way Huge Conspiracy Theory (drive), EarthQuaker Devices Tone Job (EQ), MXR Phase 90 (modulation), MXR Carbon Copy (delay), and EHX Holy Grail (reverb). The Rocktron HUSH pedal helps control any unwanted noises and buzzing.
Rig Rundown: The Sword [2021]
Steve Earle
Folk-rock activist Steve Earle’s guitar signal first hits a Boss TU-3 tuner before running into a pair of MXR Carbon Copy analog delays (one set as a 1-second delay for a pre-song rippling effect, and one for slapback) and a Fulltone Full-Drive 2 with two levels of gain. A Voodoo Lab Pedal Power 2 supplies the juice.
Steve Earle's Pedalboard
Chris Masterson
Chris Masterson's Pedalboard
The first stop on sideman Chris Masterson’s pedalboard is an Analog Man Sun Lion. From there the signal hits a Boss TU-3w Waza Craft tuner, an Origin Effects Cali76 compressor, an Analog Man King of Tone, and two Strymons—a Mobius and a TimeLine. A Strymon Zuma supplies power, while a Radial BigShot SW2 controls amp reverb and tremolo.
Rig Rundown: Steve Earle and the Dukes
Torres’s Mackenzie Scott
Little on Mackenzie Scott’s pedalboard could be described as subtle or “transparent”—even her delays and reverbs accentuate the weird.
Mackenzie Scott's Pedalboard
Filth and fury come courtesy of a Joyo Vintage Overdrive and an EarthQuaker Devices Palisades. Next is a Death By Audio Echo Dream 2 modulation/delay/boost/fuzz, which Scott says is her most-used pedal. An EarthQuaker Afterneath provides deep, ambient reverbs, which she often beefs up with faux-synth vibes from an Electro-Harmonix POG2. (Another favorite application for the POG2 is pulling its attack all the way down and dramatically gliding into the notes.) Scott uses an Empress Vintage Modified Superdelay to sprinkle in modulation, reverse delay, and compression, as well as tape-echo-like grit. The last pedal on her board is a Meris Enzo, which she half-jokingly says is equal parts inspiring and frustrating. “I have a hard time getting it under control and taming the beast, but that’s what I love about it.”
Rig Rundown: Torres
Mackenzie Scott (aka Torres) likes a good juxtaposition. Her music is a tightrope act between vulnerability and violence. Scott’s lyrics often reflect intros...IDLES’ Mark Bowen
To accomplish all the fantastic and outrageous tones captured on Idles’ last two records, Bowen brings a whole cast of characters to accomplish that feat.
Mark Bowen's Pedalboards
Mark Bowen’s main board features two Death By Audio units—a Reverberation Machine and an Echo Dream 2—an Adventure Audio Dream Reaper, a pair of Moogs—an MF Delay and an MF Ring—a Death By Audio Waveformer Destroyer, an Electro-Harmonix POG2, a 4ms Pedals Mini Swash Full (which serves up fuzz, distortion, and self-oscillating LFO craziness), two Red Pandas—a Particle and a Raster—and a JHS Haunting Mids. A Boss TU-3w Waza Craft tuner keeps his guitars in check and a GigRig G3 controls preset changes.
Near his amps, Bowen has another batch of tone morphers. Up top he’s got a 4-pack of Moog Moogerfooger monsters—MF-107 FreqBox, MF-102 Ring Modulator, MF-108M Cluster Flux, and a CP-251 Control Processor—and another no-name glitch/synth device. Below those we have an Electro-Harmonix 95000 Stereo Looper, a Strymon TimeLine, an Electro-Harmonix POG2, and an Old Blood Noise Endeavors Minim (reverb/delay and reverse). Lastly, he has a Nord Electro 6D at his disposal. Everything is powered by GigRig Timelord power supplies, while two Strymon Iridiums handle cab emulations.
The last part of Bowen’s setup is this board under his keyboard/Moogerfooger workstation. Here, he has another GigRig G3 switcher, another Electro-Harmonix 95000 Stereo Looper, a GigRig Three2One (to help balance levels between instruments), and three Mission Engineering EP-1 expression pedals (controlling some of the effects in the previous photo).
IDLES' Lee Kiernan
The time spent mentioning everything Kiernan does with these pedals is better served watching the Rundown, listening to Idles’ music, or attending one of their shows. But in doing our due diligence, here are the stomps that corrupt, challenge, and ravage his tone.
Lee Kiernan Pedalboard
Lee Kiernan relies on (upper right) a Strymon Flint, a couple of Drolo Fx stomps—a Twin Peaks tremolo and a Stamme[n] looper/glitch delay/tape machine/sustainer/reverb—and a pair of Death By Audio devices—a Micro Dream delay and a Space Bender prototype. The bottom row of this board is also home to a DigiTech Whammy, an Electro-Harmonix Synth9, an Intensive Care Audio Vena Cava Filter, a Moog MF Ring, and a Boss TU-3 tuner. A GigRig ABY-Baby (top right) is used for amp switching. (The small black box labeled “in/out” was built by tech Gavin Maxwell so Kiernan could quickly test out a pedal without having to rip his setup apart.) The board on the left begins (lower middle of pic) with a Mission Engineering EP-1 expression pedal, a Boss PS-6 Harmonist, an EarthQuaker Devices Data Corrupter, a Death By Audio Interstellar Overdriver Deluxe, and a Death By Audio Evil Filter. The top row of this board features a quartet of EarthQuaker stomps: an Organizer polyphonic organ emulator, an Arrows preamp, a Gray Channel overdrive, and a Tone Job EQ/boost—then proceeds to a Moog MF Chorus, a Death By Audio Reverberation Machine, and a Jam Pedals TubeDreamer.
Rig Rundown: Idles
Caspian's Phil Jamieson
Post-rock instrumentalist Phil Jamieson’s most recent live board features four main food groups—dirts, loopers, delays, and reverbs—plus Electro-Harmonix Voice Box and MEL9 pedals for a snack. A Boss GE-7 graphic EQ—used for a clean boost with low-mid punch—is always on, while a Strymon Sunset and an Empress Heavy provide three layers of beef.
Next is an Ernie Ball VP Jr. volume pedal, then a TC Electronic Ditto X4, which Jamieson favors for its hold and tape-stop modes. Four more Strymons follow—a TimeLine, an El Capistan (“The pedal I can’t live without”), a blueSky Reverberator, and a Flint. At the end of the signal chain are a Boss RC-3 Loop Station loaded with samples for use as interludes, a mini black box for dramatic signal cuts, and a TC Electronic PolyTune Mini.
Nick Perri — Photo by Justin Higuchi
The Underground Thieves frontman (and former hired gun with Shinedown and Perry Farrell) has a fairly modest and old-school board.
His guitar signal first hits a vintage Dallas-Arbiter Fuzz Face, then proceeds to a Texadelphia Germanium Booster, a Sir Henry Uni-Vibe clone, a Metropoulos Supa-Boost, a Peterson StroboStomp HD, a Maxon AD999 Analog Delay, and a Hamstead Soundworks Signature Analogue Tremolo.