The PG editors pick their favorite gear of NAMM day 2.
Ted Drozdowski - Editorial Director
Carr Bel-Ray
Although Steve Carr wasn’t at NAMM 2024, his latest amp, the Carr Bel-Ray, was—at the Reverend booth. This one’s in a handsome emerald green, and sounds killer. Like all Carr amps, it’s hand-wired. What else? Custom U.S.-made transformers, Solen Fast Capacitors, carbon composition resistors, and Jupiter signal caps. Output is 16 watts, with two 12AX7s, one EF86, one EL84, and one EZ81 rectifier tube. The control set—with its distinctive hot-rod display—is level, 3-band EQ, tremolo speed and depth, and a power attenuator, down to 2 watts. The speaker is a Fane F25. It weighs in at 34 pounds and streets at $3,340.
Nick Millevoi - Senior Editor
Iris/Circle Strings Guitars
The Iris/Circle Strings booth had lots to offer. Built for the discerning working musician’s taste and price range, their acoustic line covers a range of options and the DF slope-shouldered dreadnought is a standout at $2,350. They also brought a pair of Paul Languedoc builds that Trey Anastasio fans were busy bugging out about!
Eastman Henry James Signature Juliet
Over at Eastman, guitarist Henry James dr used his signature model. His version of the popular Juliet is a solidbody beast with Goldo vibrato, Seymour Duncan Vintage Mini-Humbockers, and a reverse headstock. They’re coming spring 2024 at $2,099
Red Panda Radius
Red Panda’s new Radius pedal has loads of deep tones to discover. Ostensibly a ring mod/frequency shifter, its unique controls will allow you to head to the outer limits with phase-shifting, tremolo sounds, and much, much more! Priced at $349, they’re available now.
Jason Shadrick - Associate Editor
Santa Cruz Vault Series
Santa Cruz’s Vault Series is built upon the idea of using very old reclaimed wood that master luthier Richard Hoover has been saving for decades. This D-style model uses Brazilian Rosewood from the Bryn Athena Cathedral for the back and sides and master grade Fort Ross Chapel redwood for the top. Nearly every part of this build is immaculate and the craftsmanship pushes the limits of modern lutherie. The price? $70,000.
Victory Amps MK Clean
Victory Amps brought two new models to the show. The MK Clean is a monster clean machine with loads of headroom, spring reverb, bright switch, and selectable EQ voicings. On the other side, the MK Overdrive is a 3-channel setup with independent gain controls, switchable volume levels, presence, and more. Production begins in March and they will go for around $5k.
A dual-channel tube preamp and overdrive pedal inspired by the Top Boost channel of vintage VOX amps.
ROY is designed to deliver sweet, ringing cleans and the "shattered" upper-mid breakup tones without sounding harsh or brittle. It is built around a 12AX7 tube that operates internally at 260VDC, providing natural tube compression and a slightly "spongy" amp-like response.
ROY features two identical channels, each with separate gain and volume controls. This design allows you to switch from clean to overdrive with the press of a footswitch while maintaining control over the volume level. It's like having two separate preamps dialed in for clean and overdrive tones.
Much like the old amplifier, ROY includes a classic dual-band tone stack. This unique EQ features interactive Treble and Bass controls that inversely affect the Mids. Both channels share the EQ section.
Another notable feature of this circuit is the Tone Cut control: a master treble roll-off after the EQ. You can shape your tone using the EQ and then adjust the Tone Cut to reduce harshness in the top end while keeping your core sound.
ROY works well with other pedals and can serve as a clean tube platform at the end of your signal chain. It’s a simple and effective way to add a vintage British voice to any amp or direct rig setup.
ROY offers external channel switching and the option to turn the pedal on/off via a 3.5mm jack. The preamp comes with a wall-mount power supply and a country-specific plug.
Street price is 299 USD. It is available at select retailers and can also be purchased directly from the Tubesteader online store at www.tubesteader.com.
Our columnist’s Greco 912, now out of his hands, but fondly remembered.
A flea-market find gave our Wizard of Odd years of squealing, garage-rock bliss in his university days.
Recently, I was touring college campuses with my daughter because she’s about to take the next step in her journey. Looking back, I’ve been writing this column for close to 10 years! When I started, my kids were both small, and now they’re all in high school, with my oldest about to move out. I’m pretty sure she’s going to choose the same university that I attended, which is really funny because she’s so much like me that the decision would be totally on point.
The campus looks way nicer than it did back in the ’90s, but there are similarities, like bars, shops, and record stores. Man, our visit took me back to when I was there, which was the last time I was active in bands. Many crash-and-burn groups came and went, and it was then that I started to collect cheap guitars, mainly because it was all I could afford at the time, and there were a lot of guitars to find.
In that era, I was using an old Harmony H420 amp (made by Valco), a Univox Super Fuzz, and whatever guitar I was digging at the time. I was so proud to pull out oddball guitars during shows and just have this totally trashy sound. Squealing and squeaking and noisy as heck, my style was reminiscent of Davie Allan, Ron Asheton, and Chuck Berry. Of course, I was way worse than all of them, but I did have a frenetic energy and I covered up my lack of skill with feedback. During the ’90s, there was a great punk revival, and I loved bands like the Mummies, Teengenerate, the Makers, the New Bomb Turks, and a bunch of others. Bands were embracing lo-fi, and I was planted firmly in that vein. Plus, the guitars I liked to use already sounded lo-fi.
“This was about the trashiest-sounding guitar, but in a good way!”
For a short spell I was using this Greco guitar and, man, this was about the trashiest-sounding guitar, but in a good way! See, Fujigen pickups (like the ones here) have this echoey voice that I describe as an “empty beer can” sound. My Super Fuzz would just destroy these pickups, and I wish I had some recordings from that era, because it was a real scene! I believe this Greco was a flea-market find but it was much later that I found out it was called a Greco Model 912. This was actually a copy of a German-made Framus guitar, but with a lot more glitz and a crazier headstock. Four pickup selector switches, volume/tone knobs, and a rhythm/lead switch rounded out the electronics. Again, these pickups are instant spaghetti-Western movie tone. Airy and bright, the bridge area is like instant, gnarly surf music. Tom Morello of Rage Against the Machine has a similar guitar and John Barrett of Bass Drum of Death was also fond of these pickups. Interestingly enough, these particular Grecos were made in small numbers, ranging between 500 to 600 in total (including all pickup combinations).
The Greco brand was initially owned by the U.S.-based Goya Corporation, but in the late 1960s, Fujigen bought the brand name (for $1,000) and produced a few truly gonzo guitars, including this Model 912. Originally called the GE-4, the four-pickup version sold for $99.50 in 1967. My particular 912 was sold at Sid Kleiner Guitar Studios in Califon, New Jersey (which I learned thanks to the attached store sticker on the headstock).
Aside from the chrome coolness and the four pickups, this model featured a cute little flip-up bridge mute that was all the rage at the time. The body also had some tasteful German carvings around the edges, and as I write this, I am missing this guitar tremendously! But not even close to the way I’m going to miss my girl in a few months. At least I know that she can shop at the same record stores!
Kevin Gordon and his beloved ES-125, in earlier days.
Looking for new fuel for your sound and songs? Nashville’s Kevin Gordon found both in exploring traditional blues tunings and their variations.
I first heard open guitar tunings while in college, from older players who’d become friends or mentors, and from various artists playing at the Delta Blues Festival in the early mid-’80s, which was held in a fallow field in Freedom Village, Mississippi—whose topographical limits likely did not extend beyond said field.
I remember Jessie Mae Hemphill wearing a full-length leopard-print coat and black cowboy hat in the September heat, walking through the crowd selling 45s, and James “Son” Thomas singing his bawdy version of “Catfish Blues.” Also, an assembly of older gentlemen passing a pint bottle, all wearing vests with the name of their fraternal society sewn on the back: Dead Peckers Club.
I played in master minimalist Bo Ramsey’s band from 1988 to ’90. Living in Iowa City, attending grad school for poetry, weekend gigs with Bo were another equally important kind of education. He was the first guy I played in a band with who used open tunings. Nothing exotic: open G or open E, early Muddy Waters and Elmore James. Music I had loved since growing up in Louisiana. This was our bond, the music we both considered bedrock. Some of my first songs, written for that band, featured Bo on slide guitar.
I moved to Nashville in 1992, a city already populated with a few friends—some from Iowa, some from Louisiana. Buddy Flett was from Shreveport; I’d loved his playing since seeing him in the band A-Train in the early ’80s. We’d go eat catfish at Wendell Smith’s, and inevitably talk about songs. He’d achieved some success as a writer, working with fellow north Louisianan David Egan, employing his own kind of sleight-of-hand mystery in both G and D tunings.
In 1993, I found a guitar that would change my life and my songwriting: a scrappy Gibson ES-125 from 1956, standing in a corner of a friend’s apartment in Nashville, covered in dust. I asked if I could borrow it, for no particular reason other than to get it out of there so that it would be played. I wrote a song on it, in double drop-D tuning [D–A–D–G–B–D]. Not a great song, but it got me thinking about open strings and tunings again. I was looking for a way to play solo shows that reflected where I came from, and where the songs came from that I was writing.“The droning aspect of open tunings always appealed to me, and in the context of solo gigs, the big sound of octaves ringing out helped this insecure guitar player sound a little taller, wider . . . something.”
So, I put the guitar in open D [D–A–D–F#–A–D], put flatwounds on it, and started figuring out chord shapes (other than barring flat across) that I could use to play my songs, all of which at that point had been written and performed in standard tuning. I’d bought a ’64 Fender Princeton amp years before, when I was 19, but had never found a use for it until now: The 125 through the Princeton on about four was the sound. The droning aspect of open tunings always appealed to me, and in the context of solo gigs, the big sound of octaves ringing out helped this insecure guitar player sound a little taller, wider . . . something. The fingerings I came up with all seemed to mask the third of the scale—so you’d have a big sound which was neither major nor minor. And for my songs, it just felt right. By the time I recorded my second album for Shanachie, Down to the Well, in 1999, I was writing songs in open D (“Pueblo Dog”). For the next two albums, released in 2005 and 2012, the majority of the songs were written and performed live in open D, employing a capo when necessary.
As usual, the methods and habits developed while touring fed back into the writing and recording processes. For my latest release, The In Between, though, most of the songs were written and recorded in standard—“Simple Things,” “Tammy Cecile,” “Coming Up”—with some exceptions, including “Keeping My Brother Down,” “You Can’t Hurt Me No More,” and the title track, on which I play a ’50s Gibson electric tenor archtop in a peculiar tuning: C–G–C–G. Though I can’t say that open tunings make for better songs, they do help me hear chords differently, at times suggesting progressions that I wouldn’t normally think of. One song currently in-progress has these verse changes: VIm / I / VIm / I / VIm / I / II / II. In standard tuning, that VI would sound (to my ear) too bright. But because I’m writing it in open D, how I fret the VI sounds low and dark, appropriate for the lyric and melody, creating the right setting for the lines and story to unfold.
Ethnomusicologist Frances Densmore records the song of Mountain Chief, head of the Blackfeet Tribe, on a phonograph for the Bureau of American Ethnology in 1916.
Once used as a way to preserve American indigenous culture, field recording isn’t just for seasoned pros. Here, our columnist breaks down a few methods for you to try it yourself.
The picture associated with this month’s Dojo is one of my all-time favorites. Taken in 1916, it marks the collision of two diverging cultural epochs. Mountain Chief, the head of the Piegan Blackfeet Tribe, sings into a phonograph powered solely by spring-loaded tension outside the Smithsonian. Across from him sits whom I consider the patron saint of American ethnomusicologists—the great Frances Densmore.
You can feel the scope and weight of theancient culture of the indigenous American West, and the presence of the then-ongoing women’s suffrage movement, which was three years from succeeding at getting the 19th Amendment passed by Congress. That would later happen on June 4, 1919—the initiative towards granting all women of this country the right to vote. (All American citizens, including Black women, were not granted suffrage until 1965.)
Densmore traversed the entire breadth of the country, hauling her gramophone wax cylinder recorders into remote tribal lands, capturing songs by the Seminole in southern Florida, the Yuma in California, the Chippewa in Wisconsin, Quinailet songs in Northern Washington, and, of course, Mountain Chief outside the Smithsonian in Washington, D.C. Author of more than 20 books and 200 articles, she carefully preserved the rich cultural diversity of Native Americans with over 2,500 field recordings.
Why am I writing about this? Firstly, to pay homage! Secondly, because it serves as a great reminder to seek and cultivate sound outside the studio as well. We live in a time of great technological power and convenience. Every week a new sample pack, plugin, pedal, or software instrument hits the market. For all the joy that these offerings bring, they deprive us of the joy of creating our own instruments from scratch.
This month, I’m advocating for you to make some field recordings of your own—nature, urban, indoor, outdoor, specific locations, animals, or anything that piques your interest! Bring the material back to the studio and make music with it! I’ll show you how to make your own sample libraries to use in your music. Tighten up your belts, a multipart Dojo is now open.
What do you need to get started? Quite simply, you just need any device that is capable of recording. This can range from your cell phone to a dedicated field recorder. The real question is: Do you want to use mics housed in handheld units or have more robust mic pres with the ability to power larger live/studio microphones using XLR connectors found with the larger units? Let’s look at three scenarios.
The Cellular Approach
The absolute easiest way to get started is with your cell phone. Take advantage of a voice-memo recording app, or use an app that records multitrack audio like GarageBand on iOS. Phone recordings tend to sound very compressed and slightly lo-fi—which might be exactly what you want. However, the method can also introduce unwanted noise artifacts like low-end rumble (from handling the phone) and phasing (moving the mic while recording). I recommend using a tripod to hold your phone still while recording. You might also want to consider using an external mic and some software to edit your sample recordings on the phone. I like using a Koala Sampler ($4.99) on iOS devices.
Upgrade Me
The next step up is to use a portable recorder. These have much better mic pres, and offer true stereo recording with pivoting mic heads. This can give you the added benefit of controlling the width of your stereo image when recording or helping isolate two sound sources that are apart from each other. You sacrifice the ability to easily edit your recordings. You simply import them into your computer and edit the recording(s) from there.
Pro-Level Quality
I would recommend this scenario if you want to record multiple sources at once. These devices also have SMPTE time code, 60+ dB of gain, phantom power (+48 volts), advanced routing, and a 32-bit/192 kHz sampling rate, so you’ll never have a distorted recording even when the meter gets unexpectedly pegged into the red from a loud sound source. I recommend the Zoom F8n Pro ($1099). Now you can use your microphones!
Best Practices
Try to safely record as close to the sound source as you can to minimize ambient noise and really scrub through your recordings to find little snippets and sound “nuggets” that can make great material for creating your own instrument and sample library—which we’ll explore next month! Namaste.
