
Intermediate
Intermediate
- Develop an understanding of how to approach chord tones with bends.
- Learn to think and phrase like a pedal-steel player.
- Create old-school, honky-tonk lines with a twist.
Let’s face it folks, pedal-steel is a pillar of the country music sound. It’s one of my favorite instruments—not just in country, but all music genres. The ability to play complex chords, the range of the instrument, the way you can manipulate bends (with knee levers and pedals), and the lyrical quality and tone add so much to the country sound. The textures and chord voicings can really beef up a rhythmic part, but also can make you cry in your beer with a single-note line that includes so much articulation and manipulation it can make your head spin. We are going to mainly focus on a one element that really makes the pedal-steel guitar special and very difficult to emulate on guitar: bending notes.
Most guitar players typically will bend with their ring finger. In some of these examples you will be bending with your index and middle as well—in a very foreign fashion. Think of it like lifting weights and adding more independence to each individual finger. It’s not easy and will take time if you’re not used to this technique. Keep in mind, you do not need any bender built into your guitar. Your fingers will do all the work. I also didn’t include any licks using a volume pedal although you could incorporate one if you desire
Now let’s break down these licks!
The first two examples will give you a good idea of how to start thinking like a pedal-steel player. Ex. 1 is a simple A major scale (A–B–C#–D–E–F#–G#) but certain notes are bent instead of fretted. Note the half-step bend on the 3 (bend that with your middle finger) and the full-step bend on the 7th fret of the 2nd string, as well as the half-step bend to get back to the A. Mastering playing in tune is vital to having that pedal-steel effect on guitar. I would also let the first note played in this example ring until you’ve reached the 2nd string. This will give the line a cascading effect. Listen to the audio example and try to match the phrasing and articulation of the line. For all examples a healthy dose of reverb helps notes “sing” more.
Ex. 1
Ex. 2 is a descending line that starts with a pre-bend. You will see this technique a lot. It’s a key component in getting the sound. Ring finger does all the bends on this lick.
Ex. 2
While there is only one bend in this example, you’ll need to hold the bend on the 12th fret of the 3rd string while moving your pinky from the 13th fret down to the 12th fret on the 1st string. This is a pretty standard type of steel lick that I always use in my playing. It works great over a C chord.
Ex. 3
The tricky part about Ex. 4 is connecting the two separate bends. You do this by releasing the bend at the 11th fret on the 3rd string and sliding down to the 9th fret then bending up again. It should be seamless and immediate to get the phrasing correct. All bends are done with your ring finger. This is just a great lick to play over an E chord.
Ex. 4
In Ex. 5 we add an element of chicken picking with a “cluck” or dead note before the first three bends. We work down the neck with a series of pre-bent double-stops. It’s a standard but effective pedal-steel technique, but it’s tricky. The first bend in measure 1 bends the 1st string up a half-step while the 2nd string goes up a whole-step. It sounds complicated, but because of the differing string gauges, it actually works pretty naturally. Just go for it. The next double-stop bend requires both the 3rd and 2nd strings to go up a whole-step. Attitude is more important than intonation, so do it with no fear. For the final Gsus2 to G bend, barre your pinky on the top two strings and use your middle finger to bend up a whole-step.
Ex. 5
Ex. 6 works well if you’d like pedal-steel bends over minor chords. This lick uses some open strings, which creates a nice tension that emphasizes the 9 (B) against the Am chord. As you work your way down the neck, you’ll need to bend with the middle finger on the 7th fret of the 3rd string. More notes in this lick but well worth the work.
Ex. 6
Ex. 7 is another pre-bend lick that uses unison notes, which is common for steel players. In this turnaround lick, use your in index to bend down on the 2nd fret of the 3rd string. You could think of this as an end of a tune lick so using rubato or a free feel is cool.
Ex. 7
Here (Ex. 8) we move into a repetitive lick with a triple-stop slide at the end barred with the index finger. Notice we start in a simple D minor shape. Adding a bend gives it lots of texture and once bent, the chord functions nicely as a G7. The middle finger is busy on this lick, bending up a whole-step on the 14th fret of the 3rd string.
Ex. 8
Hopefully you’ve enjoyed some of these licks. They aren’t easy but they add some cool textures, tension, and resolution to your guitar lines. Make sure to really try to nail the part as close to the recording as you can. It’s taken me years of practice and thousands of gigs to really have some of these ideas and licks under my fingers. This is just a small microcosm of the possibilities of these kinds of licks. Let them inspire you to try to write your own or fit them into a tune you already play.
I like incorporating pedal-steel bends into my playing because it makes me think about different musical elements. Experiment with half- and whole-step bends, as well as pre-bends, and learn to phrase more like a pedal-steel player. It’s fun and challenging and will add tons of color and options when creating musical lines.
- Cosmic Country: A Bad Case of the Bends - Premier Guitar ›
- Orange Guitar: “Little” Steel Guitar Voicings - Premier Guitar ›
- Twang 101: Pedal Steel Bends 101 - Premier Guitar ›
- Pedal to the Metal: A Short History of the Pedal Steel Guitar ... ›
- Chromatic Twang - Premier Guitar ›
On our season two finale, the country legend details his lead-guitar tricks on one of his biggest hits.
Get out the Kleenex, hankies, or whatever you use to wipe away your tears: It’s the last episode of this season of Shred With Shifty, a media event more consequential and profound than the finales of White Lotus and Severance combined. But there’ll be some tears of joy, too, because on this season two closer, Chris Shiflett talks with one of country music’s greatest players: Vince Gill.
Gill’s illustrious solo career speaks for itself, and he’s played with everyone from Reba McEntire and Patty Loveless to Ricky Skaggs and Dolly Parton. He even replaced Glenn Frey in the Eagles after Frey’s death in 2017. His singing prowess is matched by his grace and precision on the fretboard, skills which are on display on the melodic solo for “One More Last Chance.” He used the same blackguard 1953 Fender Telecaster that you see in this interview to record the lead, although he might not play the solo the exact way he did back in 1992.
Tune in to learn how Gill dialed his clean tone with a tip from Roy Nichols, why he loves early blackguard Telecasters and doesn’t love shredders, and why you never want to be the best player during a studio session.
If you’re able to help, here are some charities aimed at assisting musicians affected by the fires in L.A:
https://guitarcenterfoundation.org
https://www.cciarts.org/relief.html
https://www.musiciansfoundation.org
https://fireaidla.org
https://www.musicares.org
https://www.sweetrelief.org
Credits
Producer: Jason Shadrick
Executive Producers: Brady Sadler and Jake Brennan for Double Elvis
Engineering Support by Matt Tahaney and Matt Beaudion
Video Editor: Addison Sauvan
Graphic Design: Megan Pralle
Special thanks to Chris Peterson, Greg Nacron, and the entire Volume.com crew.
New RAT Sound Solution Offers a Refined Evolution of Distortion
ACT Entertainment ’s iconic RAT brand has unveiledthe Sterling Vermin, a boutique distortion guitar pedal that blends heritage tone with modernrefinement. With a new take on RAT’s unmistakable sound, Sterling Vermin delivers a new levelof precision and versatility.
“The Sterling Vermin was born from a desire for something different — something refined, withthe soul of a traditional RAT pedal, but with a voice all its own,” says Shawn Wells, MarketManager—Sound, ACT Entertainment, who designed the pedal along with his colleague MattGates. “Built in small batches and hand-soldered in ACT’s Jackson, Missouri headquarters, theSterling Vermin is a work of pure beauty that honors the brand legacy while taking a bold stepforward for creativity.”
The Sterling Vermin features the LM741 Op-Amp and a pair of selectable clipping diodes.Players can toggle between the traditional RAT silicon diode configuration for a punchy, mid-range bite, or the BAT41 option for a smoother, more balanced response. The result is a pedalthat’s equally at home delivering snarling distortion or articulate, low-gain overdrive, with a wide,usable tonal range throughout the entire gain spectrum.
The pedal also features CTS pots and oversized knobs for even, responsive control that affordsa satisfying smoothness to the rotation, with just the right amount of tension. Additionally, thepolished stainless-steel enclosure with laser-annealed graphics showcases the merging of thepedal’s vintage flavor and striking design.
“From low-gain tones reminiscent of a Klon or Bluesbreaker, to high-gain settings that flirt withBig Muff territory — yet stay tight and controlled — the Sterling Vermin is a masterclass indynamic distortion,” says Gates, an ACT Entertainment Sales Representative. “With premiumcomponents, deliberate design and a focus on feel, the Sterling Vermin is more than a pedal, it’sa new chapter for RAT.”
The RAT Sterling Vermin is available immediately and retails for $349 USD. For moreinformation about this solution, visit: actentertainment.com/rat-distortion .
$149
Marshall 1959 Super Lead
The very definition of classic, vintage Marshall sound in a highly affordable package.
There’s only one relevant question about Marshall’s new 1959 Super Lead overdrive/distortion pedal: Does it sound like an actual vintage Super Lead head? The answer is, simply and surprisingly, yes. The significant difference I heard within the voice of this stomp, which I ran through a Carr Vincent and a StewMac Valve Factory 18 kit amp for contrast, is that it’s a lot quieter than my 1972 Super Lead.
The Super Lead, which bore Marshall’s 1959 model number, debuted in 1965 and was the amp that defined the plexi sound. That sound is here in spades, clubs, diamonds, and hearts. Like the Super Lead, the pedal is easy to use. The original’s 3-band EQ is replaced by a single, rangeful tone control. The normal dial and the volume, which together mimic the character created by jumping the first and second channels of a plexi head, offer smooth, rich, buttery op-amp driven gain and loudness. And the high-treble dial functions much like the presence control on the original amp.
The pedal is sturdy and handsome, too. A heavy-duty metal enclosure evokes the classic black-with-gold-plate plexi look and a vintage-grille-cloth motif. Switches and knobs (the latter with rubber sides for slip-free turning) are ultra solid, and—refreshingly—there’s a 9V battery option in addition to a barrel-pin connection. Whether with single-coils or humbuckers, getting beefy, sustained, historic tones took moments. I especially delighted in approximating my favorite Super Lead head setting by flooring the high treble, normal, and tone dials, and turning back the tone pots on my Flying V, evoking Disraeli Gears-era Clapton tone. That alone, to me, makes the 1959 Super Lead stomp a bargain at $149.Two guitars, two amps, and two people is all it takes to bring the noise.
The day before they played the coveted Blue Room at Third Man Records in Nashville, the Washington, D.C.-based garage-punk duo Teen Mortgage released their debut record, Devil Ultrasonic Dream. Not a bad couple of days for a young band.
PG’s Chris Kies caught up with guitarist and vocalist James Guile at the Blue Room to find out how he builds the band’s bombastic guitar attack.
Brought to you by D’Addario.
Devilish Dunable
Guile has been known to use Telecasters and Gretsches in the past, but this time out he’s sticking with this Dunable Cyclops DE, courtesy of Gwarsenio Hall—aka Jordan Olds of metal-themed comedy talk show Two Minutes to Late Night. Guile digs the Dunable’s lightness on his shoulders, and its balance of high and low frequencies.
Storm Warning
What does Guile like about this Squier Cyclone? Simple: its color. This one is also nice and easy on the back, and Guile picked it up from Atomic Music in Beltsville, Maryland.
Crushing It
Guile also scooped this Music Man 410-HD from Atomic, which he got just for this tour for a pretty sweet deal. It runs alongside an Orange Crush Bass 100 to rumble out the low end.
James Guile’s Pedalboard
The Electro-Harmonix Micro POG and Hiwatt Filter Fuzz MkII run to the Orange, while everything else—a DigiTech Whammy, Pro Co Lil’ RAT, and Death by Audio Echo Dream 2—runs to the Music Man. A TC Helicon Mic Mechanic is on board for vocal assistance, and a TC Electronic PolyTune 3, Morley ABY, and Voodoo Labs Pedal Power 3 Plus keep the ship afloat.