
The MXR Rockman X100 Analog Tone Processor is designed to revive the signature sonic character of that headphone amp in stompbox form.
In 1982, Tom Scholz—visionary guitarist and founder of pioneering hard rock band Boston—designed and released the Rockman X100 headphone amp through his electronics company Scholz Research & Development. But it was more than just a headphone amp—with recording console connectivity and several tone tweaking features and built-in effects, the X100 became the secret weapon in the studio that would go on to define the polished, chorus-laden sound of 1980s arena rock.
Aided by veteran MXR engineer and SR&D alum Bob Cedro, the MXR design team captured the same crystalline cleans, crunchy harmonics, and shimmering modulation as the original. With the same four tonal presets, carefully calibrated compression, and bucket-brigade chorusing, this all-analog recreation also features both mono and stereo modes and optional external mode switching for an enhanced user experience.
RE-COMPRESSED
A key component of the original X100’s sound was a complex compression circuit for keeping the signal clear whether clean or dirty. The MXR Rockman X100 Analog Tone Processor comes equipped with the same circuit, tuned for a slow release on clean modes and a fast release on dirty modes. The overall amount of compression is tied to the Input Gain level—more input gain means more compression.
MODED OUT
Like the original, the Rockman X100 Analog Tone Processor features four different presets, selectable via the MODE button: two differently equalized clean modes with high-power sustain and two distinctively gritty dirty modes. The default setting, CLN2 mode, provides a clean, crystal clear tone, while CLN1 mode offers a mid-focused EQ curve for a tight, punchy sound. On the dirty side, Edge mode boasts moderate clipping that’s highly sensitive to Input Gain adjustments and cleans up nicely at low guitar volume levels. Distortion mode delivers high-energy overdrive and sustain that’s perfect for easy, fluid lead tones.
ON THE LEVEL
Tailoring your levels is simple with dedicated Input Gain and Volume sliders. Input Gain adjustments affect how your incoming signal interacts with the X100 Analog Tone Processor’s four modes—especially the Edge setting—while Volume sets the level going to your amplifier.
THE BUCKET BRIGADE
Equipped with the same classic MN3007 bucket brigade chip found in the original headphone amp, the Rockman X100 Analog Tone Processor will infuse every riff and lick with bucketfuls of expansive, shimmering chorus with a simple push of the Chorus button.
DIG DEEPER
Like a more advanced setup? You can connect an off-board switch such as the MXR TRS Split + Tap for foot control of the Mode switch. And if you’re into stereo, this pedal stereo allows you to send the signal of your selected mode to L/R channels while varying the chorus between the two sides for a more spacious and dynamic effect.
ARENA ROCK IN A BOX
The MXR Rockman X100 Analog Tone Processor brings the same rig-in-a-box tones that the original did—but this time, it’ll fit right onto your pedalboard. There’s never been a better way to capture the big tones and texture of the arena rock era. Get yours now.
- The defining sound of arena rock in pedal form
- Crystalline cleans, crunchy harmonics, and shimmering modulation
- Same four tone presets—two clean, two dirty—as the original headphone amp
- Complex compression circuit tuned for a slow release on clean modes and a fast release on dirty modes
- Original bucket-brigade chip for lush, expansive chorusing
- Advanced features include off-board switching, stereo mode, and more
- AVAILABLE NOW
- $229.99 street
- MXR Bass Chorus Deluxe Pedal Review ›
- MXR Dyna Comp Bass Review ›
- Celebrating a Nasty Little Dirt Box ›
Godin unlocked a lot doors for players when they first introduced their popular Multiac. They continue striving to improve their design with slight tweaks and this year was no different as they brought a pair dazzlers that have new, comfier neck shapes (designed to lure the electric player to the nylon-based instrument) and dreamy finishes like the Opalburst (with a maple fretboard) & Oceanburst (with a richlite fretboard). They also are packed with updated custom-voiced LR Baggs electronics. Both models have hollowed silver leaf maple bodies & necks, a solid cedar top with figured flame leap top (that's sunken into the body).
Fishman introduced a new set of Greg Koch signatures, the Gristle-Tone ST Strat-style trio, at NAMM 2025, as part of its Fluence series. They are remarkably hi-fi sounding, with exceptional definition, clarity, and punch. And while they come stock in Koch’s latest Reverend Signature model, the Gristle ST, you can get ’em from Fishman for your S-style axe at $269 (street) per set. PS: You gotta watch the demo video!
Naw, this ain’t a DI. It’s Radial’s NAMM-fresh Highline passive line isolator, which comes in mono ($179 street) and stereo ($249), and uses premium Jensen transformers to preserve your signal’s pure sound. The Highline takes 1/4" cable (with XLR outs) for connecting amp simulators or pedals to your amps or a DAW. It’s compact and pedalboard friendly, and the Mono version sums stereo sources down to mono. The Stereo can take four 1/4 ” inputs and deliver a stereo signal, but it can also sum stereo sources down to mono. And it fits snugly under a pedalboard.
Ren Ferguson is a master luthier and has worked with several companies throughout his impressive career, but his current venture is building custom instruments under his own name (with some help from family). He's putting all the knowledge and expertise he's absorbed over the decades he's worked constructing workhorse guitars that not only sound stellar, but look the part, too. He showed us his slope-shouldered dread that was a clydesdale of an acoustic that looked regal and sounded powerful.